Manual

5. Pilot Lamp and Test Firing
^ Set the power switch to I.
The Speedlite starts to recharge. When
recharging is completed, the pilot lamp
lights.
O After the pilot lamp lights, press it
^ to test fire the flash. (The pilot lamp
is also a test firing button.)
The flash cannot be test fired while the exposure setting Is displayed during the
L|1 halfway pressing of the shutter button and the four seconds after the shutter
button is released.
6. Flash Exposure Confirmation
The flash confirmation lamp lights for
2 sec. after the flash fires if the correct
flash exposure has been obtained. If
the flash confirmation lamp does not
light after the flash fires, the picture
may have been underexposed. Move
closer to the subject and try again.
14