Owner's Manual

Using Wireless Flash *
fI "11;1 [LJRLJUI:::::WIIIi ][ !l1I1!! r ' I m.llliftlBLfllUj '111UII It :mn, JLII[ t!llJ[ IiI ' ""'ll ' •
Fully-automatic Shooting with One External SpeedHte
and
Built-in Flash
This shows fully-automatic
wireless flash shooting with
one external Speedlite and
the built-in flash.
You can change the flash
ratio between the external
Speedlite and built-in flash to
adjust how the shadows look
on the subject.
pprox.
7m
23.0ft.)
.-----.rwo~Approx. 10m
(32.8ft.)
Approx. 7m
Built-in flash func. setting
Shutter sync. 1st curtain
E- TIL II Evaluative
Wireless func. "-': ~
Channel 1 ch
'1 Select [Wireless func.].
fj Follow step 5 on page 121 to select
[~ .. : ~~] for [Wireless func.], then
press
<@>.
mIm Clear flash settings
&BI Test flash firing
Built-in flash func. setting
Channel 1 ch
21 . 11 . 12 •
.
Flash expo comp -L2 .. 1..~ .. 1..2.~3
mIm Clear flash settings
&BITest flash firing
Set the desired flash ratio and
shoot.
~ Select [ .. : ~] and set the flash ratio
within
8: 1 to 1: 1. Setting a flash ratio
to the right
of 1:1 (up to 1:8) is not
possible.
~ If the flash output is inadequate, set a
higher ISO speed (p.62).
[l] The 8: 1 to 1: 1 flash ratio is equivalent to 3:1 to 1: 1 stops (1 /2-stop
increments
).
122