Owner's Manual

Using Wireless Flash *
". Hiil" "; ".Ullll!iii~ " "I" IlL" ;;)
Fully-automatic Shooting with Multiple External Speedlites
Multiple Speedlite slave units can be treated as one flash unit or
separated into slave groups whose flash ratio can be set.
The basic settings are shown below. By changing the
[Firing group]
setting, you can shoot with various wireless flash setups with multiple
Speedlites.
Built-in flash func. setting
Flash mode E- TTL II
Shutter sync. 1st curtain
E- TTL II Evaluative
Wireless func. :0-'
Channel 1 ch
em Clear flash settings
IiS!I Test flash firing
Basic settings:
Flash mode
E-TTL
II
Wireless func.
Channel
E-TTL
II
Evaluative
;-.
(Same as slave units)
I
Set [Firing group] to
[
.. (A+B+C)], then shoot.
________ J.o~Approx. 10m
(32.8ft.)
Outdoors
[-. (A+B+C)] Using multiple slave Speedlites as one flash unit
Convenient when you need a
large flash output. All the
slave Speedlites will fire at the
same output and controlled to
obtain a standard exposure.
No matter what the slave
lOis
(A, B, or C), all the slave units
Approx.
5m (16.4ft.)
will fire as one group.
Indoors
123