Owner's Manual

Using Wireless Flash 1<
_,-='-."Approx. 10m
(32.8f1.)
[-. (A:B)] Multiple slave units in multiple groups
Divide the slave units into
groups A and
B, and change
the flash ratio to obtain the
desired lighting effect.
Refer to your Speedlite's
instruction manual to set one
slave unit's slave
10 to A
(Group A) and the other
slave unit's
10 to B (Group
B) and position them as
shown
in the illustration.
Built-in flash func. setting
Wireless func. ;;.::.
Channel 1 ch
Firing group ·.(A:B)
•
1 Set [Firing group] to [-. (A:B)].
A:B fire ratio 2"1, 1:' . 1:2
mIM Clear flash settings
mel Test flash firing
Built-in flash func. setting
Firing group ~(A:B)
A: B fire ratio
21 . " . 12
• •
Set the desired flash ratio and
shoot.
~ Select [A:B fire ratio] and set the
flash ratio.
mIM Clear flash settings
E.fI Test flash firing
[]] The 8:1 to 1:1 to 1:8 flash ratio is equivalent to 3:1 to 1:1 to 1:3 stops (1/2-
stop increments).
124