Owner's Manual

i,.mlll I J: II
11111
Using Wireless Flash *
o Approx. 10m
(32.8ft.)
[~ (A:B C)] Multiple slave units in multiple groups
This is a variant of the [-.
(A:B)] setup on the preceding
page. This setup has group C
eliminate the shadows
created by groups
A and B.
Refer to your Speedlite's
instruction manual
to set the
slave
10 of the three slave units
to A (Group A), B (Group B),
and C (Group C) and position
them
as shown in the
illustration.
1 Set [Firing group] to [~ (A:B C)].
Set the desired flash ratio and
shoot.
.~ Select [A:B fire ratio] and set the
flash ratio.
~ Set flash exposure compensation for
group C as necessary.
I
[iI @ If [Firing group] is set to [-. (A:B)], group C will not fire.
~ If group C is pointed toward the main subject, overexposure may result.
125