Owner's Manual

mmg Appending Dust Delete Data *
Normally, the Self Cleaning Sensor Unit will eliminate most of the dust
that might be visible on captured images. However,
in case visible dust
still remains, you can append the Dust Delete Data to the image to later
erase the dust spots. The Dust Delete Data is used by Digital Photo
Professional (provided software) to erase the dust spots automatically.
Preparation
fi Get a solid-white object (paper, etc.).
$ Set the lens focal length to 50mm or longer.
$ Set the lens focus mode switch to <MF> and set the focus to infinity
(00). If the lens has no distance scale, look at the front of the lens and
turn the focusing ring clockwise all the way.
Dust Delete Data
Cancel OK
Updated: 08/311'0913:10
Dust Delete Data
One-touch RAWtJPEG Im/~L
Obtaining the data for
erasing dust with software.
Refer to Instruction Manual.
Obtain the Dust Delete Data
1 Select [Dust ~elete Data].
• Under the [0:] tab, select [Dust
Delete Data], then press <@ >.
2 Select [OK].
• Turn the < 0 > dial to select [OK],
then press
< @ >. After the automatic
sensor cleaning ends, a message will
appear. Although there will be a
shutter sound, a picture
is not taken.
Dust Delete Data
Press the shutter button
completely, when ready
for shooting
I
185