Owner's Manual

Ii!IT3ml Manual Sensor Cleaning *
Dust which could not be removed by the automatic sensor cleaning can
be removed manually with a blower, etc.
The surface of the image sensor is extremely delicate. If the
sensor needs to be cleaned directly, having it done by a Canon
Service Center is recommended.
Before cleaning the sensor, detach the lens from the camera.
1 Select [sens[~.r] clbeani1ng1[·S
• Under the T· ta I se ect ensor
cleaning], then press < @ >.
Select [Clean manually].
~ Turn the < 0 > dial to select [Clean
manually], then press < 8 >.
End the cleaning.
4fp Set the power switch to < OFF>.
[i] f$ As the power source, using the AC Adapter Kit ACK-E6 (sold separately)
is recommended.
*' If you use the battery, make sure it is fully recharged. If a battery grip with
size-AA/LR6 batteries
is attached, manual sensor cleaning will not be
possible.
. (tean manually
Mirror will lockup.
After manually cleaning
sensor, turn power switch
to <OFF>.
Cancel ~
3 Select [OK].
~ Turn the < 0 > dial to select [OK],
then press < @ >.
~ In a moment, the reflex mirror will
lockup and the shutter will open.
* "CLn" will blink on the LCD panel.
I
187