Owner's Manual

t( PictBridge
6
Preparing to Print
Playback the image.
• Press the <[B> button.
~ The image will appear, and the < t( >
icon will appear on the upper left to
indicate that the camera is connected
to a printer.
o • Movies cannot be printed.
.. The camera cannot be used with printers compatible only with CP Direct
or Bubble Jet Direct.
• Do ·notuse
any interface·cable other than the one provided.
• If there is a long beeping sound in stepS,
it indicates a problem with the
printer.
To find out what'swrong, do the following:
1. Press the <[B>··butlQO to playback the image.
2. Press <@>.
3. On the printsetting screen, ~elecr[Print].
The error message wiUbe displayedon the tel:> monitor (p.198).
~.
L...iI • You can <.:lIso print RAW images taRenby this camera.
• If you use the battery to power the camera, make sure
itis fully charged.
With
afully-chargedbatt~ry, printing LJptp abput 4hQursis possible.
• Beforedisconnecting the cable,turn
off the camera andprinter first. Hold
the plug (not the cord) to pull out the cable.
• For directprinting, u~ingth€fACAdap~erKit ACK-E6 (sold separately) to
powerthecamerai.s recommended.
191
I