Owner's Manual

t{Printing
,,_ QNatural M :
~< ~~ mJIi]F~l
~~#l •
,I. ,,;; l}JJ 1 copies
.~ ..
Off
Off
Off
ONatural M
~ Adjustment of Printing Effects
In step 4 on page 194, select the printing
effect. When the
< § > icon is displayed
next to
< t:ml!J >, press the < INFO. >
button. You can then adjust the printing
effect. What can be adjusted or what
is
displayed will depend on the selection
made
in step 4.
§J PrintEHect
i~rightness
Adjust levels
& Brightener
Red-eye corr.
~ Brightness
The image brightness can be adjusted.
~ Adjust levels
When you select [Manual], you can change
the histogram's distribution and adjust the
image's brightness and contrast.
With the Adjust levels screen displayed, press
the
< INFO. > button to change the position of
the < I >. Turn the < 0> dial to freely adjust
the shadow level (0 - 127) or highlight level
(128 - 255).
• :,&,: Brightener
Effective in backlit conditions which can make the subject's face look
dark. When [On]
is set, the face will be brightened for printing.
• Red-eye carr.
Effective in flash images where the subject has red eye. When [On]
is set, the red eye will be corrected for printing.
[:Il • The I :&: Brightener] and [Red-eye corr.] effects will not show on thescreen.
• When you select [Detailset.], you can adjust the [Contrast].
[Saturation], [Color tone]. and [Color balance). To adjust the [Color
balance], use <~f:>. Bisfor blue, A is amber,M is magenta, andGis
green. The color in therespectiv~ direction will be corrected.
.. If you setect[Clear all], all the printing effect settingswiUbe reverted to
the default.
196