Owner's Manual

'" Direct Printing with DPOF
~Print order
rtf}
o Standard
7 prints
~Index
2 images
Date On
File No,
Off
Sel.lmage
By.
All image
Set up
Print
£mm)~
With a PictBridge printer, you can easily
print images with DPOF.
1 Preparing to print.
~ See page 190. Follow the "Connecting the Camera to a Printer"
procedure up to step
5.
2 Under the [E).] tab, select [Print order] .
.3 Select [Print].
~ [Print] will be displayed only if the camera is connected to the
printer and printing is possible.
Set the [Paper settings]. (p.192)
ff# Set the printing effects (p.194) if necessary.
5 Select [OK].
U ~ Before printing, be sure to set the paper size.
~ Certain printers cannot imprint the file No.
*» If [Bordered] is set, the date might be imprinted on the border, depending on the printer.
@ Depending on the printer, the date might look light if it is imprinted on a
bright background or
on the border.
[]] ® Under [Adjust levels], [Manual] cannot be selected.
~ If you stopped the printing and want to resume printing the remaining
images, select [Resume]. Note that printing will not resume if you stop
the printing and any
of the following occurs:
• Before resuming the printing, you changed the print order or deleted
print-ordered images.
• When you set the index, you changed the paper setting before resuming the printing.
• When you paused the printing, the card's remaining capacity was low.
* If a problem occurs during printing, see page 198.
202