Owner's Manual

I§I!J Custom Function Settings*
C.Fn I: Exposure
C.Fn I -1 Exposure level increments
0: 1/3-stop
1: 1/2-stop
Sets 1/2-stop increments for the shutter speed, aperture, exposure
compensation, AEB, flash exposure compensation, etc. Effective when
you prefer to control the exposure
in less fine increments than 1/3-stop
increments.
[lI The exposure level will be displayed in the viewfinder and on the LCD
panel as shown below.
o
C.Fn I -2 ISO speed setting increments
0: 1/3-stop
1: 1-stop
C.Fn I -3 ISO expansion
0: Off
1: On
For the ISO speed, "H" (equivalent to ISO 12800) will be selectable.
C.Fn I -4 Bracketing auto cancel
0: On
The AEB and WB-BKT settings will be canceled if you set the power
switch to <OFF> or clear the camera settings. AEB will also be canceled
when the flash is ready to fire.
1: Off
The AEB and WB-BKT settings will be retained even when the power
switch
is set to <OFF>. (When the flash is ready, AEB will be canceled.
However, the AEB amount will be retained
in memory.)
206