Owner's Manual

m3mJ Custom Function Settings *
C.Fn I -5 Bracketing sequence
The AEB shooting sequence and white balance bracketing sequence can
be changed.
0: 0, -, +
1: -, 0, +
o:Standard exposure 0 : Standard white balance 0: Standard white balance
- : Decreased exposure - : Blue bias - : Magenta bias
+ : Increased exposure +: Amber bias + : Green bias
C.Fn I -6 Safety shift
0: Disable
1: Enable (Tv/Av)
This works in the shutter-priority AE (Tv) and aperture-priority AE (Av)
modes. When the subject's brightness changes erratically and the
correct autoexposure cannot be obtained, the camera will change the
exposure setting automatically to obtain a correct exposure.
C.Fn I -7 Flash sync. speed in Av mode
0: Auto
Normally, the sync speed will be set automatically within 1/250 sec. to
30 sec. High-speed sync can also take effect.
1: 1/250-1/60 sec. auto
When flash is used with aperture-priority AE (Av), this prevents a slow
flash-sync speed from being set automatically
in low-light conditions. It
is effective for preventing subject blur and camera shake. However,
while the subject will be properly exposed with the flash, the background
will come out dark.
2: 1/250 sec. (fixed)
The flash-sync speed is fixed to 1/250 sec. This more effectively
prevents subject blur and camera shake than with setting
1. However,
the background will come out darker than with setting
1. •
207