Owner's Manual

Troubleshooting Guide
~[i ]: .; :.]illlr .. fI'llilli.: IlnDIUII' •• lil;:.I!!!] ..
The access lamp still blinks even when the power switch is set to <OFF>.
ft If the power is cut off while an image is being recorded to the card, the
access lamp will still continue
to light/blink for a few seconds. When
the image recording
is completed, the power will turn off automatically.
The battery becomes exhausted quickly.
~ Use a fully-charged battery (p.24).
~ The battery performance might have degraded. See the [~: Battery
info.] menu to check the battery's performance level (p.230). If the
battery performance
is poor, replace the battery pack with a new one.
~ If you keep displaying the Quick Control screen (p.38) or shooting Live
View shooting or movie shooting (p.131, 149) for a prolonged period,
the number of possible shots will decrease.
The camera turns off by itself.
~ Auto power off is in effect. If you do not want auto power off to take
effect, set
[~. Auto power off] to [Off].
Shooting-Related Problems
No images can be shot or recorded.
• The card is not properly inserted (p.29).
• If the card is full, replace the card or delete unnecessary images to
make room (p.29, 179).
• If you try to focus
in One-Shot AF mode while the focus confirmation
light
<. > in the viewfinder blinks, a picture cannot be taken. Press the
shutter button halfway again to focus, or focus manually (p.35, 92).
The viewfinder is dark.
• Install a recharged battery pack in the camera (p.26).
244