Owner's Manual

Troubleshooting Guide
1! :: IiIm r . UIUUl1UI:ne :li
H
IIIJI.
Ii : ..11]:11[:;; I! . .!i illll:ilRIIiBIJLJIIUII
Part of the image blinks in black.
¢fr The [~r Highlight alert] menu option is set to [Enable] (p.163).
A red box is displayed on the image.
tID The [El: AF point disp.] menu option is set to [Enable] (p.163).
The file name's first character is an underscore ("_MG_").
~ Set the color space to sRGB. If Adobe RGB is set, the first character
will be
an underscore (p.82).
The file numbering does not start from 0001.
~ If you use a card which already has images recorded, the file
numbering might start from the last image
in the card (p.80).
The shooting date and time displayed is incorrect.
~ The correct date and time has not been set (p.42).
No image appears on the TV screen.
i;$ Make sure the AV cable or HOMI cable's plug is connected all the way
in (p.176, 177).
~ Set the video OUT format (NTSC/PAL) to the same video format as
the TV (p.240).
• Use the AV cable that came with the camera (p.176).
Printing-Related Problems
There are fewer printing effects than listed in the instruction manual.
• What the screen displays may differ depending on the printer. This
instruction manual lists all the printing effects available (p.194).
248