Owner's Manual

Turning on the Power
~--.r- --~-------
< ON > : The camera turns on.
< OFF> : The camera is turned off and
does not operate. Set to this
position when not using the
camera.
About the Automatic Self-Cleaning Sensor
• Whenever you set the power switch to <ON> or <OFF>, the sensor
cleaning will be executed automatically. During the sensor cleaning,
the LCD monitor will display
< .+D >. Even during the sensor
cleaning, you can still shoot by pressing the shutter button halfway
(p.35) to stop the sensor cleaning and take a picture.
f$ If you repeatedly turn the power switch < ON >/< OFF> at a short
interval, the
<"0' > icon might not be displayed. This is normal and
not a problem.
About Auto Power Off
Iff To save battery power, the camera turns off automatically after about
1 minute
of non-operation. To turn on the camera again, just press
the shutter button halfway (p.35).
~ You can change the auto power-off time with the menu's [~. Auto
power off] setting (p.44).
[II If you set the power switch to < OFF> while an image is being recorded to
the card,
[Recording ...] will be displayed and the power will turn off after
the card finishes recording the image.
27
I