Owner's Manual

* This drive mode <jl5J> can be set
in all shooting modes.
• Press the
<AF·DRIVE> button, then
turn the
<0> dial.
0: Single shooting
~H: High-speed continuous
shooting
~: Low-speed continuous
shooting
i ~: 10-sec. self-timerl
Remote control*
i ~2: 2-sec. self-timerl
Remote control
~ Drive Mode *
• Press the <ISO·~> button, then
turn the
<~> dial.
• ISO 100 to 6400 can be set in
1/3-stop increments.
e When "A" is selected, the ISO
~~~==~~::::~~ speed is set automatically. When
you press the shutter button
halfway, the ISO speed setting
will be displayed.
• Press the
< ~ > button to pop up
the built-in flash, then shoot.
•
In the Full Auto (0) mode, the
built-in flash will pop up and fire
automatically under low-light or
backlit conditions.
~ Using the Built-in Flash
Tv: Shu~er-priority AE
• Set the Mode Dial to <Tv>.
• Turn the <~> dial to set the
desired shutter speed, then focus
the subject.
.,. The aperture will be set
automatically.
o lib If the aperture display blinks, turn
the
<~> dial until it stops blinking.
. Av : Aperture-priorityAE';
• Set the Mode Dial to <Av>.
• Turn the <~> dial to set the
desired aperture, then focus the
subject.
Joo,;.~.=~ .. The shutter speed will be set
automatically.
o • If the shutter speed display blinks,
turn the
<~> dial until it stops
blinking.
(~,~~
@)O~1lil
·';:S
.l 0
F' ExPOSlJre:llalter<.;e;;gi;;;~
You can change the camera settings
as desired to shoot in various ways.
* Set the Quick Control Dial switch to «>.
All the settings necessary for
shooting are set automatically. You
just press the shutter button, and
the camera does the rest.
P/Tvl Av Modes
o Full Auto
@)Creative Auto -----'l~~
Fully-Automatic Modes (
P: Program AE
• Set the Mode Dial to < P >.
• As with the <0> mode, when focus is achieved, the shutter
speed and aperture will be automatically set.
(Displayed only when
<~> is set.)
• Press the <[Q]> button, then tilt
<.;~;.> to select the function,
• Turn the
<~> or <0> dial to set the function.