Owner's Manual

f]
LCD brightness Auto
Date/Time 08/311'0913:10
Iangua~~j=~= ... ~.~~]sJi~_=~-=_.
Before You Start
Ilml!J Setting the Interface Language
1 Select [Language_].
e Under the [~:] tab, select
[Language.] (the third item from
the top), then press
< @ >.
Set the desired language.
~ Turn the < 0 > or < B > dial to select
the language, then press
< @ >.
... The interface language will change.
Ilml!J Setting the Date and Time
Check if the camera's date and time are set correctly. If necessary, set
the correct date and time.
.
LCD brightness Auto
~- ~ , ~ ~"~
DatelTime 08/31/'09 13: 10
~-- - -- - - ~ ~~ ~ ~ - --~ ~- ~.~~ ~
Date/Time
Set Date/Time
..
08 . 31 . 2009 :Ts': 10: 00
•
mm/dd/yy
(08/31/2009)
OK Cancel
1 Select [Date/Time].
• Under the [~:] tab, select [Datel
Time], then press <@>.
2 SetTthe dahte, toime a~dl date display tormbat.
• urn t e <" > dla to select the num er.
G Press <@> so ¢ is displayed.
• Turn the < 0> dial to select the desired
setting, then press <@> (Returns to D ).
3 Exit the setting.
• Turn the <0> dial to select [OK],
then press
< @ >.
~ The date/time will be set and the
menu will reappear.
[l] It is important to set the correct date/time because it will be recorded
together with each captured image.
42