Owner's Manual

AF: Selecting the AF Mode {[
AF point
Focus confirmation light
One-Shot AF for Still Subjects
Suited for still subjects. When you
press the shutter button halfway, the
camera will focus only once.
~ When focus is achieved, the AF point
which achieved focus will be
displayed, and the focus confirmation
light
<. > in the viewfinder will also
light.
~ With evaluative metering, the
exposure setting will be set at the
same time focus is achieved.
~. While you hold down the shutter
button halfway, the focus will be
I
locked. You can then recompose the
shot
if desired.
~ In the P lTv I Av IM/B shooting
modes, AF is also possible by
pressing the
< AF-ON > button.
~~
CD
ONE SHOT
"- ~
0
[i] ~ If focus cannot be achieved, the focus confirmation light <e> in the
viewfinder will blink. If this occurs, a picture cannot be taken even if the
shutter button
is pressed completely. Recompose the picture and try to
focus again.
Or see "When Autofocus Fails" (p.92).
i@ If the [~. Beep] menu is set to [Off], the beeper will not sound when
focus
is achieved.
85