Canon EOS ~E"Tli EOS 500rE
Thank you for purchasing a Canon product. The EOS REBEL T1 i/EOS 5000 is a high-performance, digital singlelens reflex camera featuring fine-detail CMOS sensor with 15.10 effective megapixels, DIGIC 4, high-precision and high-speed 9-point AF, approx. 3.4 fps continuous shooting, Live View shooting, and Full HD (Full High-Definition) movie shooting. The camera is highly responsive for shooting at anytime, provides many features for demanding shots, and has many other features.
Item Check List •••.·.1.1B:.:::. IIIIBI!lllIm:BIIIlI!· _ Before starting, check that all the following items have been included with your camera. If anything is missing, contact your dealer. ~. 1· [] . ...... --<" .' Camera (with eyecup and body cap) Wide Strap EW-1000B III EOS DIGITAL Solution Disk (Software) Battery Pack LP-E5 (with protective cover) Interface Cable IFC-200U I [T]l ·I . . ·.. •. .· . .• .• •.· •.·•• . • . • . •. •. •. .• . .. (,1 . .•....• ...•.• "1 - ",.:- .... _.
l,;onventlons usea In this Manual _ Icons in this Manual : Indicates the Main Dial. < JJJ..T > < ~~ > : Indicate the <.. :~ > cross keys. <@> : Indicates the setting button. 04, 06, 810, 816 : Indicates that the respective function remains active for 4 sec., 6 sec., 10 sec., or 16 sec. respectively after you let go of the button. * In this manual, the icons and markings indicating the camera's buttons, dials, and settings correspond to the icons and markings on the camera and on the LCD monitor.
Chapters .•.•..•n.:•.••••IJII.·BE.linIlIIIl'.:1111111..111litII·"·.·.Tm.a•..~···•.·".u.r.··__I_JIlL For first-time users, chapters 1 and 2 explain the camera's basic operations and shooting procedures. Introduction 21 Camera basics. 1 Getting Started 231 2 Basic Shooting and Image Playback 431 3 4 Fully automatic shooting for different subjects. Advanced Shooting Techniques Shooting features for specific types of subjects. More Advanced Techniques Advanced shooting features . __ __._._.. _....
Item Check List 3 Conventions Used in this Manual.
Contents P: Program AE ISO: Changing the ISO Speed 60 ~ Using the Built-in Flash 62 AF: Changing the AF Mode 64 rn Selecting the AF Point 66 MF: Manual Focusing 67 58 ~ Continuous Shooting 68 & Using the Self-timer 69 Setting the Image-recording Quality 70 o:~ Selecting a Picture Style 73 Tv: Action Shots Av: Changing the Depth of Field 76 Depth of Field Preview M: Manual Exposure 78 80 81 A-DEP: Automatic Depth-of-Field AE 82 [$J Changing the Metering Mode 83 AvIB ~ Settin
Contents . . . .lIM1~.I. .:.jr"'.1 jll '.BRIIL_mn_JIE•. ·1 "I o o Live View Shooting 106 Setting Shooting Functions 108 Using AF to Focus 111 Focusing Manually 118 .'" Shooting Movies , Movie Settings , 122 , Handy Features Silencing the Beeper 123 130 , 130 Card Reminder 130 Setting the Image Review Time 130 Setting the Auto Power-off Time 131 Adjusting the LCD Monitor Brightness 131 File Numbering Methods 132 Auto Rotate of Vertical Images 134 DISP.
Contents ·1]][[.· . "IT ise ••I!I· . IlriillliJHim Slide Show (Auto Playback) 154 Viewing the Images on TV 156 ~ Protecting Images 158 lID Erasing Images DISP. Shooting Information Display 159 161 Preparing to Print 164 t( Printing 166 Trimming the Image 171 .., Digital Print Order Format (DPOF) 173 Direct Printing with DPOF 176 ~.
• ' ", .....~~L ....•..... .:.: . , c"'{;. '" ,~ • "'f? y -, ; Contents at a Glance \t Shoot automatically i~ Shoot continuously mp (Basic Zone modes) -7 p.47, 50, 68 (~ Continuous shooting) ,"'* p.69 (~ Self-timer) \t Take a picture of myself in a group ~ p.43 - 55 ~ Freeze the action Blur the action ~ Blur the background ~ Keep the background in sharp focus ~ p.78 (Av Aperture-priority AE) if) Adjust the image brightness (exposure) ~ p.
• ~ Make a large size print of the ~ Take many pictures ~ p.70 (. S, .II S) ~ Change the point of focus ~ p.66 (EEl AF point selection) • Shoot a moving subject ~. p.50, 65 (AI Servo AF) ~ ~ p.56 ~ p.148 (~ Index display) ~ p.158 View the images with the camera • Search for pictures quickly tif picture'~ Prevent important images from accidental deletion p.70 (.l, .Ill, 9) ([8 Playback) (~ Image protect) C® • Delete unnecessary images "7 p.
Handling Precautions • •III1II1III _ _. . .l_:r.Camera Care ~ This camera is a precision instrument. Do not drop it or subject it to physical shock. ~ The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult your nearest Canon Service Center. Wipe off any water droplets with a dry cloth. If the camera has been exposed to salty air, wipe it with a well-wrung wet cloth.
Handling Precautions LCD Monitor i® ® i® Although the LCD monitor is manufactured with very high precision technology with over 99.99% effective pixels, there might be a few dead pixels among the remaining 0.01 % or less pixels. Dead pixels displaying only black or red, etc., are not a malfunction. They do not affect the images recorded. If the LCD monitor is left on for a prolonged period, screen burn-in may occur where you see remnants of what was displayed.
-\ Set the lens focus mode switch to . (p.
Quick Start Guide ffiHBfiRliiIJIMiW• • m .u imlL r nlu gnEillil·:JIDlliKIJIlUI[ .J.: J.EI;I hil . [IB Set the Mode Dial to <0> (Full Auto). (p.44) All the necessary camera settings will be set automatically. Focus the subject. (p.37) Look through the viewfinder and aim the viewfinder center over the subject. Press the shutter button halfway, and the camera will focus the subject. 11ft 1& The shooting settings displayed on the LCD monitor will turn off when your eye nears the viewfinder eyepiece.
Nomenclature :.::_RJ.<•.·_I•..•.•d.J!I•...·.~.L!.L2 BliR,,·JR![......' .lli •••. The names in bold indicate the parts explained up until the "Basic Shooting and Image Playback" section. Mode Dial (p.20) Power switch (p.27) < ISO > ISO speed setting button (p.60) < _.- Built-in flash/AF-assist beam (p.62/139) - I- 1., EF Lens mount index (p.33) .............. EF-S Lens mount index (p.33) - - Flash-sync contacts > Main Dial - (pA) Red-eye Depth-of-field preview Remote control terminal (p.
Nomenclature Eyecup (p.195) --1 I Viewfinder eyepiece I Display-off sensor (p.138) _ . Dioptric adjustment knob (p.36) -- < Av~ > Aperture/Exposure compensation button (p.81 /84) */ ~.e. > AE lock/ FE lock button/ Index/Reduce button (p.94/95/148/150, 171) < Shooting - - - - settings display button (p.42,135) -.......,....-+--+-- Card slot LCD monitor ----7!-.;----(p.38,131) cover (p.31) DC cord hole (p.193) <~/~""""> Live View shooting/ Movie shooting/Print/Share button (p.
Nomenclature I Min . Ii.. .• mUlcn .IlliN ..'J. ] .111'[['11 ;. 1:IIJm ! .191 Shooting Settings Display Shutter speed Exposure level indicator l j -- ~~ Main Dial pointer (p.75) ISO speed (p.60) Highlight tone priority (p.186) I I ~~~~:u~:ation Aperture- 1/125 amount (p.84) Flash exposure compensation (p.85) AEB range (p.86) Metering mode (p.83) Shooting mode - - - - ' ....~..•.. , [~D Picture Style (p.73)···-Quick Control icon (p.
"''';'1[11 allm:ll~n!• •; Hllilli!!;lIllL• • '_I H Nomenclature tU'.J! .... , I;' il;!' i T Viewfinder Information AF point display indicator <.> ISO speed White balance correction < * > AE lock/ - - - , ! AEB in-progress Focus confirmation light i i < ~ > Flash-ready Improper FE lock warning (FP flash) <~*> FE lock/ FEB in-progress < ~ > Flash exposure _ _.....J ii I, L Max. burst ._- < B/W > Monochrome shooting III, < ~ H > High-speed sync ----J compensation I-'- I I L.
Nomenclature • l'• •Il&1I_IS. ._IJiUfiiUiJ41:aBlIIIIRmIIIZ ]_" 7 . Fmi!. Mode Dial The Mode Dial has the Basic Zone modes, Creative Zone modes, and Movie shooting mode. Creative Zone These modes give you more control for shooting various subjects. P : Program AE (p.58) Tv : Shutter-priority AE (p.76) Av : Aperture-priority AE (p.78) M : Manual exposure (p.81) A-DEP: Automatic depth-of-field AE (p.82) Basic Zone All you do is press the shutter button. Fully-automatic shooting suitable for the subject.
Nomenclature • EF-S18-55mm f/3.5-5.6 IS lens Focusing ring (p.67, 118) Focus mode switch (p.33) - Zoom ring (p.34) Zoom position index (p.34) 1---------58 mm filter thread (front of lens) EF-S18-200mm f/3.5-5.6 IS lens Focusing ring (p.67,118) I Zoom ring (p.34) I -_..- Focus Hood mount ---l (p.217) I - I- mode switch (p.33) Zoom position index (p.34) • I I- 72 mm filter thread (front of lens) "g ~ I I ~I~ I - f--=-i' I I Zoom ring lock lever (p.34) Lens mount index (p.33) .......
Nomenclature ilii±i. Ifni"II [. ~l 1;. ii ;?m,,ynqplm'[%,; !7fLPIJft\l@l!!27 \!Ji!~Iti~!. fP!i[@p. ~, ,R• • ~~M$i, Un. "lfn III! liB I !' ff .pr! :~! ,,!l _ 1f - Milll _i I Battery Charger LC-E5 Charger for Battery Pack LP-E5 (p.24). /Y""'~-- Power plug I This power unit is intended to be correctly orientated in a vertical or mount position. ILfloor . . _ IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.
Getting Started This chapter explains preparatory steps before you start shooting and basic camera operations. Attaching the Strap Pass the end of the strap through the camera's strap mount eyelet from the bottom. Then pass it through the strap's buckle as shown in the illustration. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle. ~ The eyepiece cover is also attached to the strap (p.195).
Charging the Battery .....f.III._.I"W~_lij~.' n ij *1 Remove the protective cover. Attach the battery. / $j? l LC-E5 .t) ,3i As shown in the illustration, attach the battery securely. To detach the battery, follow the above procedure in reverse. Recharge the battery. For LC-E5 As shown by the arrow, flip out the battery charger's prongs and insert the prongs into a power outlet. For LC-E5E LC-E5E ~ Connect the power cord to the charger and insert the plug into the power outlet. ~.
WBIII'..... ...... Charging the Battery lm• •IIlIIiI. ; I;"" 111;111_11 1;11. . ~~~ Tips for Using the Battery and Charger @ Recharge the battery on the day before or on the day it is to be used. Even during non-use or storage, a charged battery will gradually discharge and lose its power. ~ After recharging the battery, detach it and unplug the charger from the power outlet. ~ When not using the camera, remove the battery.
Installing and Removing the BatterylL ".... Installing the Battery Load a fully charged Battery Pack LP-E5 into the camera. Open the battery compartment cover. ~ Slide the lever as shown by the arrow and open the cover. Insert the battery. G ~ Insert the end with the battery contacts. Insert the battery until it locks in place. Close the cover. • Press the cover until it snaps shut. Removing the Battery Open the cover and remove the battery.
Turning on the Power .'IFIII I t : PiijillUllilhl .. I In I mr. When you turn on the power switch and the date/time setting screen appears, see page 29 to set the date/time. : The camera turns on. : The camera is turned off and does not operate. Set to this position when not using the camera. About the Automatic Self-Cleaning Sensor • Whenever you set the power switch to or , the sensor cleaning will be executed automatically.
Turning on the Power DIIlTJI""~.i"I~li"LJ itlt~&J2j.I.JI'. .• Checking the Battery Level When the power switch is set to < ON >, the battery level will' be indicated in one of four levels: Battery level is OK. q••• 1 : ~ : Battery level is slightly down, but adequate power remains. ~ : Battery will be exhausted soon. c=J : Battery must be recharged. Battery Life Temperature [Approx. number of shots] . . ... . Shooting Conditions . .• . . .
I1LI:3mJ Setting the Date and Time ......11• • When you turn on the power for the first time or if the date/time has been reset, the Date/Time setting screen will appear. Follow steps 3 and 4 to set the date/time. Note that the date/time appended to recorded images will be based on this Date/Time setting. Be sure to set the date/time. ~-~ --- 1 P?IY-;-~ ~rde l~ ~~no:____ Display the menu. ~ Press the
Il!iI3mJ Selecting the Interface Language . .~ -:,1'raQ1 ((r~non-=====t om•••• I R Display the menu. ~ Press the < MEN U> button to display the menu. : 1III Under the [~:] tab, select [Language e]. -at Press the < ~ ~ > key to select the [~:] ** ::t Set the desired language. m#V 'ft- 30 tab. Press the < .... > key to select [Language. ] (the third item from the top), then press < @ >. Press the < ~:~ > key to select the language, then press <@>. The language will change.
Installing and Removing the SO Card 11111111-. . The captured image is recorded onto the card (sold separately). Make sure the card's write protect switch is set upward to enable writing/erasing. o Installing the Card '1 Open the cover. 11 Insert the card. Card's write protect switch * i-r'~;~ :-;>.5.:" ':-1.- -:. .- _--_ -. __ .-----.--------- .. _-_ • Slide the cover as shown by the arrow to open it.
Installing and Removing the SO Card IflLliL [I nIH! a;:Oli[BIGli iHi]lll il? LIBIlemll=. .J.U![. . L111S11 .. XI .UJ Removing the Card 1 Open the cover. {J Set the power switch to < OFF>. Check that "Recording ... " is not displayed on the LCD monitor. Make sure the access lamp is off, then open the cover. Remove the card. Gently push in the card, then let go. The card will stick out. Pull the card straight out, then close the cover.
Attaching and Detaching a Lens ell . HIIli ii:! in Attaching a Lens Remove the caps. 1£; EF-S lens mount index Remove the rear lens cap and the body cap by turning them as shown by the arrow. Attach the lens. ~ ~ EF lens mount index Align the EF-S lens with the camera's white EF-S lens mount index and turn the lens as shown by the arrow until it clicks in place. When attaching a lens other than an EF-S lens, align the lens with the red EF lens mount index.
Attaching and Detaching a Lens is H.1· . iEUIUIBl1 ... ·1 .. i About Zooming To zoom, turn the zoom ring on the lens with your fingers. If you want to zoom, do it before focusing. Turning the zoom ring after achieving focus may throw off the focus slightly. Detaching the Lens While pressing the lens release button, turn the lens as shown by the arrow. '1$' Turn the lens until it stops, then detach it. Attach the rear lens cap to the detached lens. To owners of the EF-S18-200mm f/3.5-5.
About the Lens Image Stabilizer 111:111._LtBl,_ _ , When you use the IS lens' built-in Image Stabilizer, camera shake is corrected to obtain a less blurred shot. The procedure explained here is based on the EF-S 18-55mm f/3.5-5.6 IS lens as an example. * IS stands for Image Stabilizer. Set the IS switch to ~ . Set the camera's power switch to . I Press the shutter button halfway. ~" :~ ; Take the picture. @ .. t@ @i EiI $\ @ f} #% The Image Stabilizer will operate.
Basic Operation Adjusting the Viewfinder Clarity Turn the dioptric adjustment knob. ~ Turn the knob left or right so that the nine AF points in the viewfinder look sharp. If the camera's dioptric adjustment still cannot provide a sharp viewfinder image, using Dioptric Adjustment Lens E (10 types, sold separately) is recommended. Holding the Camera To obtain sharp images, hold the camera still to minimize camera shake. ) 1 rt , // Horizontal shooting 1. 2. 3. 4. 5. 6. -----~~ \,"l- " -' Vertical
Basic Operation !! i i! ··9(1II1!. . ::·~.llliJ:llll illl Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing halfway ._--~- This activates autofocusing and automatic exposure metering that sets the shutter speed and aperture. The exposure setting (shutter speed and aperture) is displayed in the viewfinder. (04) Pressing completely This releases the shutter and takes the picture.
rm:mJ Menu Operations You can set various functions with the menus such as the image-recording quality, date/time, etc. While looking at the LCD monitor, use the
li!iIam.J Menu Operations Menu Setting Procedure !1 Quality ~L Beep On Release shutter without card Review time 2 sec. Peripheral iIIumin. correct. Red-eye On/Off Off Display the menu. €.t Press the
button to display the menu. Select a tab. ~ Press the < .... ~ > key to select a tab. ~. You can also turn the < > dial to select a tab. a Select the desired item. @} Press the < iJ...T > key to select the item, then press <@>. Select the setting. ~ Press the < iJ...T > or < ....Ill§m] Formatting the Card If the card is new or was previously formatted by another camera or computer, format the card with the camera. U When the card is formatted, all images and data in the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images to a computer, etc., before formatting the card. Select [Format]. ~ Under the [~.] tab, select [Format], then press <@>. Format the card. ~ Select [OK], then press < @ >.
[i!i§ID) Formatting the Card ni:" ::IE' 1"1: ; :~ -':111:: '[!II z' EiiEi' .111;;[::1[, I:II ';_llllim ~~~ Execute [Format] in the following cases: The card is new. The card was formatted by a different camera or a computer. The card is full with images or data. A card-related error is displayed (p.209). $} $k' tI $} I About Low-level Formatting @ @, @ U Do low-level formatting if the card's recording or reading speed seems slow.
Switching the LCD Monitor Screen 1\1 JIBI .. HI The LCD monitor can display the shooting settings screen, menu screen, image, etc. Shooting Settings 'f# **' o ~ Displayed when the camera is turned on. ~ When your eye nears the viewfinder eyepiece, the display-off sensor (p.17, 138) turns off the LCD monitor automatically. This prevents the bright LCD monitor from interfering with your view. The LCD monitor turns on again when your eye leaves the viewfinder eyepiece.
Basic Shooting and Image Playback This chapter explains how to use the Basic Zone modes on the Mode Dial for best results and how to playback Images. With the Basic Zone modes, all you do is point and shoot and the camera sets everything automatically (p.198). Also, to prevent botched pictures due to mistaken operations, major shooting settings cannot be changed in the Basic Zone modes. The settings (functions set automatically) which cannot be set by the user are grayed out. 1/125 [j F8.
o Fully Automatic Shooting 1 ~ AF point 11II15:..-']• • •1_ Set the Mode Dial to <0>. Aim any AF point over the subject. ,~ ~ All the AF points will be used to focus, and generally the closest object will be focused. Aiming the center AF point over the subject will make focusing easier. Focus the subject. ~, Press the shutter button halfway, and the lens will adjust the focus. The dot inside the AF point achieving focus flashes briefly in red.
o FAQ Fully Automatic Shooting <. ~ The focus confirmation light > blinks and focus is not achieved. Aim the AF point over an area having good contrast, then press the shutter button halfway (p.192). If you are too close to the subject, move away and try again. ~ Sometimes multiple AF points flash simultaneously. This indicates that focus has been achieved at all those AF points. As long as the AF point covering the desired subject flashes, you can take the picture.
o Full Auto Techniques Recomposing the Shot Depending on the scene, position the subject toward the left or right to create a balanced background and good perspective. In the < 0 > (Full Auto) mode, while you press the shutter button halfway to focus a still subject, the focus will be locked. You can then recompose the shot and press the shutter button completely to take the picture. This is called "focus lock". Focus lock is also possible in other Basic Zone modes (except < ~ > Sports).
ttl Shooting Portraits mnBIIII_miBl.iIBIIlIBm._alliUiI.lllldIBIUBn.u:tliJH.:OOIII The < ~l > (Portrait) mode blurs the background to make the human subject stand out. It also makes flesh tones and the hair look softer than with the < 0 > (Full Auto) mode. I :~~ Shooting Tips qj} The farther the distance between the subject and background, the better. The further the distance between the subject and background, the more blurred the background will look.
A& Shooting Landscapes BrIml I]' Jil: m' ilil i Use the < ~ > (Landscape) mode for wide scenery, night scenes, or to have everything in focus from near to far. The greens and blues also become more vivid and sharper than with < 0 > (Full Auto). ~~~ Shooting Tips w With a zoom lens, use the wide-angle end. When using the wide-angle end of a zoom lens, objects near and far will be in focus better than at the telephoto end. It also adds breadth to landscapes. €$ Shooting night scenes.
~, Shooting Close-ups !I! When you want to photograph flowers or small things up close, use the <,~ > (Close-up) mode. To make small things appear much larger, use a macro lens (sold separately). :~~ Shooting Tips Use a simple background. A simple background makes the flower, etc., stand out better. ~ Move to the subject as close as possible. Check the lens for its minimum focusing distance. Some lenses have indications such as <,~O.25m/O.8ft>.
~ Shooting Moving Subjects Ifiiill:::::EIII .]III!!iI[]!illl To photograph a moving subject, whether it is a child running or a moving vehicle, use the < ~ > (Sports) mode. ~~~ Shooting Tips Use a telephoto lens. Using a telephoto lens is recommended so you can shoot from afar. Use the center AF point to focus. Aim the center AF point over the subject, then press the shutter button halfway to auto focus. During autofocusing, the beeper will continue beeping softly.
~ Shooting Portraits at Night .·]IF L. To shoot someone at night and obtain a natural-looking exposure in the background, use the <~> (Night Portrait) mode. ~~~ Shooting Tips Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view. Also, use a tripod to prevent camera shake. Keep the person within 5 meters/16.4 feet from the camera. Under low light, the built-in flash will fire automatically to obtain a good exposure of the person.
l:Ll Disabling Flash UIPLI lJ . 111 !J] ill J . [III] I Ilillilli m In places where flash photography is prohibited, use the < > (Flash Off) mode. This mode is also effective for candlelight scenes when you want to capture the ambient light. ~~~ Shooting Tips &i If the numeric display in the viewfinder blinks, take care to prevent camera shake. Under low light when camera shake is prone to occur, the viewfinder's shutter speed display will blink. Hold the camera steady or use a tripod.
(CA) Creative Auto Shooting .11 _ Basic Zone modes except (Creative Auto) take care of everything, whereas the < ~ > Creative Auto mode enables you to easily change the picture's brightness, depth of field, color tone (Picture Style), etc. The default settings are the same as the < 0 > (Full Auto) mode. * CA stands for Creative Auto. Set the Mode Dial to < @) >. fp' The Creative Auto screen appears on the LCD monitor. Press <@>. *1$ ::i You can use the < ...
@) Creative Auto Shooting I; J : r !: I I II I II Ii: I I .II 1111 I :? Shutter speed and aperture 1II (1) i I------··-·-····-----i 1/125 F8.0 (2) -------- (3) - (4) -- (5) (6)---- .- - - - - - -. Possible shots Battery check (1) Flash firing ~A <~A> (Auto firing), <~> (Flash on), or <®> (Flash off) can be selected. If you set < ® > (Flash off), see "Disabling Flash" on page 52. (2) Blurring/sharpening the background lHJ I '., ,[ U' ')\.
~ Creative Auto Shooting I (4) Image effects Besides the standard image effect, you can set it for portraits, landscapes, or black-and-white photos. (p.73: Picture Style) <1 0 ::'51> (Standard): Standard image effect applicable to most scenes. < 10;:.pl > (Smooth skin tones): Effective for close-ups of women or children. (Vivid blues and greens): For impressive landscapes. < 10::'MI > (Monoch rome image): Creates black-and-white photos.
[B Image Playback The easiest way to playback images is explained below. For more details on the playback procedure, see page 147. Playback the image. ~ When you press the < [E) > button, the last captured image will be displayed. Select the image. ~~ #ft Shooting information display Histogram display ,:':1 56 To view images starting with the last image, press the < .... > key. To view images starting with the first (oldest) image, press the <~ > key. Press the
Advanced Shooting Techniques In the Basic Zone modes, to prevent spoiled shots, most functions are set automatically and cannot be changed. In the < P > (Program AE) mode, you can set various functions and be more creative. ~ In the
(Program AE) mode, the camera sets the shutter speed and aperture automatically to obtain the standard exposure. The difference between the Basic Zone modes and < P > is explained on page 198. * < P > stands for Program. * AE stands for Auto Exposure.
P: Program AE IIJIlBDIILIBJil",BllRlilllllinI:'UF = To obtain a good exposure of the subject, the camera sets the exposure (shutter speed and aperture) automatically. This is called Program AE. -Ifll;(.~,",? E({(~\ ":'1 Set the Mode Dial to < P >. \~.:-- Focus the subject. ~ ~$ ~, Look through the viewfinder and aim the selected AF point over the subject. Then press the shutter button halfway.
IB.HI ,ill 'lgJ.:illmllIUM;\ il J I I• • I Iii 11: Ii.. P: Program AE !Ii BIIII!UJII ;]1:' iB : _ 'u ~(Jij~ Shooting Tips ~) Changing the ISO speed and using the built-in flash. To match the subject and ambient lighting level, you can change the ISO speed (p.60) or use the built-in flash (p.62). In the < P > mode, the built-in flash will not fire automatically. So under low light, press the < ~ > (Flash) button to pop up the built-in flash. ffj The program can be shifted.
ISO: Changing the ISO Speed*: _ ][111_:11111' Set the ISO speed (image sensor's sensitivity to light) to suit the ambient light level. In the Basic Zone modes, the ISO speed is set automatically (p.61). Press the button. (66) • [ISO speed] will appear. Select the ISO speed. t$ %: Turn the < B > dial or press the < ..... ~ > key to select the ISO speed. You can also set the ISO speed in the viewfinder while turning the < ~ > dial. With "AUTO" selected, the ISO speed will be set automatically (p.
ISO: Changing the ISO Speed * About "AUTO" for Automatic ISO Speed If the ISO speed is set to "AUTO", the actual ISO speed to be set will be displayed when you press the shutter button halfway. As indicated below, the ISO speed will be set automatically to suit the shooting mode. Shooting Mode· DIa.l ,'f!,/~/~/rn/~1 P lTv I Av I A-DEP ... •"1 • .... • . _..
~ Using the Built-in Flash In indoors, low light, or backlit conditions in daylight, just pop up the built-in flash and press the shutter button to take flash pictures. In the
mode, the shutter speed (1/60 sec. - 1/200 sec.) will be set automatically to prevent camera shake. 1 Press the < ~ > button. [ 9 I I I @ 0 In Creative Zone modes, you can press the < ~ > button anytime to take flash pictures.
~ Using the Built-in Flash 1 J IIIii UUIJBFJiUIHi iBn H.Ifill! IID~! iUSllllwnlMU IHUIUfilil : _[Ii [ 11I1I1I11111MB! ~j>~ Shooting Tips 4b If the subject is far away, increase the ISO speed. By increasing the ISO speed, you can extend the flash range. ~. In bright light, decrease the ISO speed. If the exposure setting in the viewfinder blinks, decrease the ISO speed. i$'. Detach the lens hood and keep at least 1 meter/3.3 feet away from the subject.
AF: Changing the AF Mode"* maJI.J:II.lal'._:.11ImEl.Ila_I:•• I Select the AF mode suiting the shooting conditions or subject. In the Basic Zone modes, the optimum AF mode is set automatically. On the lens, set the focus mode switch to . Press the < ~ AF> button. [AF mode] will appear. Select the AF mode. %t Press the < ..... ~ > key to select the AF mode, then press <@>. Focus the subject. ~ Aim the AF point over the subject and press the shutter button halfway.
AF: Changing the AF Mode * lj • If focus cannot be achieved, the focus confirmation light in the viewfinder will blink. If this occurs, a picture cannot be taken even if the shutter button is pressed completely. Recompose the picture and try to focus again. Or see "When Autofocus Fails" (p.192). ~ If the [Of Beep] menu is set to [Off], the beeper will not sound when focus is achieved. AI Servo AF for Moving Subjects This AF mode is for moving subjects when the focusing distance keeps changing.
1-:-1 Selecting the AF Point *" DI:EIIl Ii :Ii 1111 In the Basic Zone modes, all the AF points are active. Generally, the AF point covering the closest subject will be selected to focus. Therefore, the camera sometimes may not focus the subject you want. With the < P > (Program AE), < Tv>, < Av >, and < M > modes, you can select one AF point to focus where you want. N" ~ ~';;;,',. ,.~' ~o~. i ' .- tl ;'II.)!J -:Jo'. -~ ..~"'--"'C7,."', i '~iO *" ""',-.; ( 1 Press the button.
EB j [lirE Selecting the AF Point 1< 22 : ; ~~~ Shooting Tips ~ When shooting a portrait up close, use One-Shot AF and focus the eyes. If you focus the eyes first, you can then recompose and the face will remain sharp. ~ If it is difficult to focus, select and use the center AF point. The center AF point is the most sensitive among the nine AF points. Also, with a fast lens from f/1.0 to f/2.8, high-precision focusing is possible with the center AF point.
~ Continuous Shooting*" .1:!!li"T.:.l!ill::!il!JllffiffillLll [. You can shoot up to about 3.4 shots per sec. This is effective for shooting your child running toward you and capturing the different facial expressions. Press the <~ ~ ~~> button. Select ~ <~>. Press the < ..... ~ > key to select <~>, then press < >. €V Take the picture. ~. The camera shoots continuously while you hold down the shutter button fully. ~~~ Shooting Tips ft Also set the AF mode matching the subject. .
~ Using the Self-timer Press the < ~ ~ ~i > button. Select the self-timer. ~ Press the < ..... ~ > key to select the desired self-timer, then press <@ >. ~~: 10-sec. self-timer The remote control can also be used. (p.194) ~2: 2-sec. self-timer'* (p.1 04) ~c: 10-sec. self-timer plus continuous shots Press the < ."'" > key to set the number of multiple shots (2 to 10) to be taken with the self-timer. Take the picture. ~ ~. ~. Focus the subject and press the shutter button completely.
m3ml Setting the Image-recording Quality • You can select the number of mega pixels to record (approx. 15.1, 8.0, or 3.7 megapixels) and the image quality. Select [Quality] . • Under the [01'] tab, select [Quality], then press < @ >. J>. [Quality] will appear. Select the image-recording quality. Quality ~l 15M 4752x3168 [ 146J .ltL ~M m+~L m .L ;aiM ~S ~ .
mr i r ! ~ lmmJ Setting the Image-recording Quality • ]'.I]. . ]].·.lIJ ?T~II""ili: ···1]]111'] lin I want to select the quality matching the paper size for printing. Refer to the diagram on the left when Paper size choosing the image-recording quality. If A3 (42x29.7cm/16.5x11.7in.) you want to crop the image, selecting a .L higher quality (more pixels) such as • L, "'L A4 (29.7x21cml IlW.l 11.7x8.3in.) .II L, la, or la + • L is recommended. 1lW.l+.L .5 ... 5 .M "'M I 17.8x12. 7 cm/7 .Ox5.0in.
m3mJ Setting the Image-recording Quality About E Ia is the raw image data before it is made into a • L or other images. Although fim!j images require software like Digital Photo Professional (provided) so they can be displayed on the computer, they also offer flexibility for image adjustments possible only with fim!j. cm!lJ is effective when you want to precisely modify the image yourself or shoot an important subject. About E+.L Ia +. L records both a fim!j and • L image with a single shot.
?:~ Selecting a Picture Style * By selecting a Picture Style, you can obtain image effects matching your photographic expression or the subject. Press the < "Y ;:~ > button. ~ [Picture Style] will appear. Select a Pictu re Style. ~ Press the < ..... ~ > key to select a Picture Style, then press < @ >. Take the picture. ~. Focus and press the shutter button completely. The picture will be taken with the selected Picture Style applied. Picture Style Effects I.
~;:. Selecting a Picture Style R I';:~NI Neutral This Picture Style is for users who prefer to process images with their computer. For natural colors and subdued images. I.;::.F\ Faithful This Picture Style is for users who prefer to process images with their computer. When the subject is captured under a color temperature of 5200K, the color is adjusted calorimetrically to match the subject's color. The image is dull and subdued. I';:~MI Monochrome (~: Monochrome image) Creates black-and-white images.
More Advanced Techniques This chapter builds on the previous chapter and introduces more ways to shoot creatively. The first half of this chapter explains how to use the < Tv> < Av > < M > < A-DEP > modes on the Mode Dial. Except for < A-DEP > all the shooting modes can be used in combination with the functions introduced in Chapter 3. The second half of this chapter, starting with "Changing the Metering Mode" explains the methods to adjust the exposure and the Picture Styles.
Tv: Action Shots _1 /11111._.11111·[111:-1111[11:1.rIB: J 11[ You can either freeze the action or create motion blur with the < Tv> (Shutter-priority AE) mode on the Mode Dial. * < Tv> stands for Time value. Frozen action (Fast shutter speed) Blurred motion (Slow shutter speed) 1 Set the Mode Dial to . Set the desired shutter speed. ~ fh· cnn u n-2,,1 .., ..1.:2 ISO unn _"_"_f I.U I fUU ~ 76 o. 3 _I See "Shooting Tips" for advice on setting the shutter speed.
Tv: Action Shots ~~~ Shooting Tips $) To freeze the action or moving subject. Use a fast shutter speed such as 1/4000 sec. to 1/500 sec. • To blur a running child or animal giving the impression of fast movement. Use a medium shutter speed such as 1/250 sec. to 1/30 sec. Follow the moving subject through the viewfinder and press the shutter button to take the picture. If you use a telephoto lens, hold it steady to prevent camera shake. $) ~ How to blur a flowing river or water fountain.
Av: Changing the Depth of Field • i •• · IlII To obtain a blurry background or to make everything near and far look sharp, set the Mode Dial to < Av > (Aperture-priority AE) to adjust the depth of field (range of acceptable focus). * < Av > stands for Aperture value which is the size of the diaphragm hole inside the lens. Sharp foreground and background (With a small aperture opening) ."1 Blurred background (With a large aperture opening) Set the Mode Dial to < Av >. Set the desired aperture.
Av: Changing the Depth of Field i I]lIB! '( . .rlm n_ ;:n II' ]11 r n: 11~1:1 iJn1B JlUU;nJT '11014 J II Z,J,IWUIJ . ~i~ Shooting Tips ~ When using a high aperture, note that camera shake can occur in low light scenes. A higher aperture will make the shutter speed slower. Under low light, the shutter speed can be as long as 30 sec. In such cases, increase the ISO speed and hold the camera steady or use a tripod.
Av: Changing the Depth of Field Using the Built-in Flash To obtain a correct flash exposure, the flash output will be set automatically to match the set aperture (autoflash exposure). The shutter speed will be set automatically between 1/200 sec. - 30 sec. to suit the scene's brightness. In low light, the main subject is exposed with the automatic flash, and the background is exposed with a slow shutter speed set automatically.
M: Manual Exposure _.&II~B"'.; ·!lI!. . . . . You can set both the shutter speed and aperture as desired. With flash, the flash exposure will be set automatically to match the aperture that was set. The flash sync speed can be set within 1/200 sec. to 1/30 sec. or to bulb. * < M > stands for Manual. ~-Eu~--l1 r" , - - ;. 1/200 <~> ~~~~"'- Set the Mode Dial to . I Set the shutter speed and aperture. ,J F63.
A-DEP: Automatic Depth-of-Field AE Objects in the foreground and background will be in focus automatically. All the AF points will function to detect the subject, and the aperture required to attain the necessary depth of field will be set automatically. * < A-DEP > stands for Auto-Depth of field. This mode sets the depth of field automatically. .. 1 Set the Mode Dial to . Focus the subject. $ji Aim the AF points over the subjects and press the shutter button halfway.
[gJ Changing the Metering Mode * •••... _ The metering mode determines the exposure. Different metering modes measure the subject brightness differently. Normally, evaluative metering is recommended. 1 Select the [Me.terin g mode]. 4$ Under the [01'] tab, select [Metering mode], then press <@>. Set the metering mode. i$ w L.-~ t (10) 8 ~ '--....-¥ E l r.1 0 0 0 [] n [j 0 [J 0 lJ 0 n J 0 Press the < ..... ~ > key to select the metering mode, then press <@>.
Setting Exposure Compensation * ~ Exposure compensation is used to alter the standard exposure set by the camera. You can make the image look brighter (increased exposure) or darker (decreased exposure). The exposure compensation setting will not be automatically canceled when you turn off the camera. After taking the picture, reset the exposure compensation to zero. Avljl Setting Exposure Compensation Set exposure compensation if the exposure (without flash) does not come out as desired.
Setting Exposure Compensation "* II 'IJ Flash Exposure Compensation * Set flash exposure compensation if the flash exposure of the subject does not come out as desired. 1 Select [FlaS~~ontrOI]. ~ I Under the [ ..... ] tab, select [F ash control], then press <@>. Select [Built-in flash func. setting]. Flash control ~ Flash firing Enable Built-in flash func. setting 3 Select [Built-in flash func. setting], then press <@>. Select [Flash expo comp]. ,@ Select [Flash expo comp], then press <@>.
IIJ.3II!1 Auto Exposure Bracketing '* .; _ This feature takes exposure compensation a step further by varying the exposure automatically with three shots as shown below. You can then choose the best exposure. This is called AEB (Auto Exposure Bracketing). Standard exposure . Darker exposure (Decreased exposure) . mIDfill Expo.comp./AEB Metering mode -2 •• 1•• ~ •• 1.:2 [s] #1 ~ Brighter exposure (Increased exposure) Select [Expo. comp.lAEB] . ~} Under the [C.:] tab, select [Expo. comp.
Ii!i§ID] Auto Exposure Bracketing . """11::1]]) ""J ""1 " q"" m, . . .,.:. " • H"l *" "ii!li!:: Canceling AEB @ ~ Follow steps 1 and 2 to turn off the AEB amount display. The AEB setting will be canceled automatically if the power switch is set to < OFF>, flash recycling is complete, etc. ~~~ Shooting Tips @ Using AEB with continuous shooting. If < ~ > continuous shooting (p.
~:~ Customizing a Picture Style * You can customize a Picture Style by adjusting individual parameters like [Sharpness] and [Contrast]. To see the resulting effects, take test shots. To customize [Monochrome], see page 90. Select [Picture Style]. ~ ~ Under the [0:] tab, select [Picture Style], then press <@>. The Picture Style selection screen will appear. Select a Picture Style. ~ Select a Picture Style, then press the button . • The Detail set. screen will appear. Select a parameter.
~:~ Customizing a Picture Style 1< ; Iim]B ,. lin Parameter Settings and Effects (j) Sharpness Adjusts the sharpness of the image. To make it less sharp, set it toward the end. The closer it is to the softer the image will look. To make it sharper, set it toward the il end. The closer it is to il, the sharper the image will look. m m, () Contrast Adjusts the image contrast and the vividness of colors. To decrease the contrast, set it toward the minus end.
o:~ Customizing a Picture Style <:r Monochrome Adjustment For Monochrome, you can also set [Filter effect] and [Toning effect] in addition to [Sharpness] and [Contrast] explained on the preceding page. ~ Filter Effect Detail set. ~Filter effect Default set. ~Monochrome tN:None Ye:Yellow Or:Orange R:Red G:Green With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more.
You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. You can create Picture Styles whose parameter settings such as for sharpness and contrast are different. You can also adjust the parameters of a Picture Style which has been registered to the camera with the provided software. fiiti Select [Picture Style]. €t Under the [CI:] tab, select [Picture Style], then press <@>.
.;::. Registering a Picture Style 11 if· I IIII! III ill: :I 5 Select a parameter. e Select a parameter such as [Sharpness], then press <@>. Set the parameter. .t * Press the < ..... ~ > key to adjust the parameter as desired, then press <@>. For details, see "Customizing a Picture Style" on pages 88-90. ~ Press the Picture Style ~Neutral ~Faithful ~Monochrome ~User Def. 1 1~;f2]User Def. 2 ~User Def. 3 I!ImI Detail set. 0.0. 0.0 0.0,0.0 3.0.N.
Ilimm Setting the Color Space '* 1IIIIIIJllllll. ._IIIJ.[_nIlJJI.l11 The color space refers to the range of reproducible colors. With this camera, you can set the color space tor captured images to sRGB or Adobe RGB. For normal shooting, sRGB is recommended. In the Basic Zone modes, sRGB is set automatically. 1 Select [Color space). ~ Under the [0:] tab, select [Color space], then press <@>. Set the desired color space. ~ Select [sRGB] or [Adobe RGB], then press <@>.
* AE Lock *: IBJIllLlllili[llllrm:_1.iiT.1i1101l1B.· lZ IBn;lJl]iIBIJIi Use AE lock when the area of focus is to be different from the exposure metering area or when you want to take multiple shots at the same exposure setting. Press the < > button to lock the exposure, then recompose and take the shot. This is called AE lock. It is effective for backlit subjects. * 1 Focus the subject. ~ ~. Press the shutter button halfway. The exposure setting will be displayed.
* FE Lock* ;.111:;· .•·. iillER·! 1_... .11 ...,.. ···"!U:: ![l,ll. FE lock locks the flash exposure setting over the desired area of the subject. This feature can also be used with a Canon EX-series Speedlite. * FE stands for Flash Exposure. Press the < ~ > button to pop up the built-in flash. qt I l.. Press the shutter button halfway and look in the viewfinder to check that the < ~ > icon is lit. Focus the subject. Press the < * > button.
WB: Setting the White Balance * White balance (WB) is for making the white areas look white. Normally, the < M > (Auto) setting will obtain the correct white balance. If naturallooking colors cannot be obtained with < m!3 >, you can select the white balance settings for different sources or set it manually by shooting a > will be set automatically. white object. In the Basic Zone modes, < a Press the ~ <. WB > button. [White balance] will appear. Select the white balance. ~ Press the < .....
WB: Setting the White Balance * ml]1 i;1'1 :.mU\I. . .l r.lIU.:UMIR. . . . .I . .l• •Lll;]. . . . .UE• • l Select [Custom WB]. I@l ~ Under the [0=] tab, select [Custom WB], then press < @ >. The custom white balance selection screen will appear. Import the white balance data. I@l ~. ~ Select the image that was captured in step 1, then press <@>. On the dialog screen which appears, select [OK] and the data will be imported. When the menu reappears, press the
button to exit the menu.~~ White Balance Correction * You can correct the white balance that has been set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels. This is for advanced users who are familiar with using color temperature conversion or color compensating filters. White Balance Correction Select [WB SHIFT/BKT]. ~ Under the [01:] tab, select [WB SHIFT/BKT], then press <@>. ..
~~ White Balance Correction .. ,.. 1. 1::;;: ·:1111 * _ White Balance Auto Bracketing With just one shot, three images having a different color tone can be recorded simultaneously. Based on the color temperature of the current white balance setting, the image will be bracketed with a blue/amber bias or magenta/green bias. This is called white balance bracketing (WB-BKT). White balance bracketing is possible up to ±3 levels in single-level increments. Set the white balance bracketing amount.
Il!iI3mJ Lens Peripheral Illumination Correction _ Due to the lens characteristics, the four corners of the picture might look darker. This is called lens light fall-off or drop in peripheral illumination. This can be corrected. For JPEG images, lens light fall-off is corrected when the image is captured. For RAW images, it can be corrected with Digital Photo Professional (provided software). The default setting is [Enable]. Select [Peripheral illumin. correct.].
§ Using the Quick Control Screen Quick Control Screen Nomenclature Aperture (p.78) ISO speed (p.60) Highlight tone priority* (p.186) Shutter speed (p.76) Exposure compensation/ AEB setting (p.86) Flash exposure compensation (p.85) ·~'""~00 Metering mode (p.83) Shooting mode* (p.20) Drive mode (p.68) Image-recording . ~ quality (p.70) I,·........ Picture Style (p.73) [l] .~ .. ,,- White balance (p.96) . . . AF mode (p.64) Asterisked functions cannot be set with the Quick Control screen.
Preventing Camera Shake * The camera's mechanical shake caused by the reflex mirror action can affect images taken with a super telephoto lens or close-up (macro) lens. In such cases, mirror lockup is effective. Mirror lockup is enabled by selecting the [~: Custom Functions (C.Fn)) menu's [Mirror lockup] and setting it to [1: Enable] (p.187). 1 Focus the subject, press the shutter button completely and release it. ~ .2 The mirror will swing up. Press the shutter button completely again.
Live View Shooting You can shoot while viewing the picture on the camera's LCD monitor. This is called "Live View shooting." Live View shooting is effective for still subjects which do not move. If you handhold the camera and shoot while viewing the LCD monitor, camera shake can cause blurred images. Using a tripod is recommended.
o Live View Shooting * 1 Set the shooting mode. • Set the shooting mode to a Creative Zone mode. • Live View shooting cannot be used in Basic Zone modes. Display the Live View image. • Press the <0> button. ~ The Live View image will appear on the LCD monitor. a The Live View image will closely reflect the brightness level of the actual image you capture. ~ If the standard exposure has not been obtained, turn the < ~ > dial. • The image's field of view is about 100 0/0. 3 Focus the subject.
o Live View Shooting * To Enable Live View Shooting Under [~: Live View function settings], set [Live View shoot.] to [Enable]. Battery Life with Live View Shooting [Approx. number of shots] $ ~ No Flash 50% Flash Use 190 180 170 160 The figures above are based on a fully-charged Battery Pack LP-E5 and CIPA (Camera & Imaging Products Association) testing standards. Continuous Live View shooting is possible for about 1 hour at 23°C173°F (with a fully-charged Battery Pack LP-E5). .
13 Setting Shooting Functions *: Function settings particular to Live View shooting are explained here. Functions Set with a Menu Under the [~:] tab, the [Live View function settings] menu options, [Grid display], [Metering timer], and [AF mode] are as described below. • Grid display With [Grid 1 =R=] or [Grid 2 $!$!$], you can display grid lines. ~ Metering timer You can change the display time of the exposure setting. e AF mode You can select [Live mode] (p.111), [~ Live mode] (p.
o Setting Shooting Functions * IUUIUIUI!t!l mlllEI;· iIIll: UUIHIIII I lllin_JUII L if IlumII IJUIIIIU i 1!lill!UUII II Inn II Select the function and set it. ~ Press the < ..:~ > key to select the function to be set. .. The name of the selected function is displayed at the bottom. :@) Turn the < B > dial to change the setting. [i] Even while the Live View image is displayed, you can still set
functions and execute playback < IE >.o Setting Shooting Functions 1< About the Information Display • Each time you press the < DISP. > button, the information display will change. AF mode .---,.,..--.-----~.- . -"-."'" . AFIm : Live mode , AF:S : Face detection Live mode ! . AFm: Quick mode I r'·----- AF point (Quick mode) I Magnifying frame I f--- f Histogram Picture Style·--White balance ---... Drive mode-Image-recording quality --._, AEB FEB AE lock-· . Exposure simulation Shutter speed _.-l. Flash-ready Aperture [i] • ..
Using AF to Focus *: Selecting the AF Mode The AF modes available are [Live mode], [~ Live mode] (face detection, p.112), and [Quick mode] (p.116). If you want to achieve precise focusing, set the lens focus mode switch to , magnify the image, and focus manually (p.118). Select the AF mode. Under [~: Live View function settings], select [AF mode]. • While the Live View image is displayed, you can press <@> to select the AF mode on the Quick Control screen.
Using AF to Focus-(:( Focus the subject. " Aim the AF point over the subject, and hold down the < > button. ~,. When focus is achieved, the AF point will turn green and the beeper will sound. ~~. If focus is not achieved, the AF point will turn red. * Take the picture. ~ Check the focus and exposure, then press the shutter button to take the picture (p.1 06). :s (Face detection) Live Mode: AF:S With the same AF method as the Live mode, human faces are detected and focused.
Using AF to Focus *' i.1 Fill ? Focus the subject. ~ Press the < * > button to focus the > frame. face covered by the <: : ~. When focus is achieved, the AF point will turn green and the beeper will sound. ~ If focus is not achieved, the AF point will turn red. ~ If a face cannot be detected, the <0> AF point will be displayed and the center AF point will be used for focusing. 3 Take the pictu reo ~ o f& ~ %$.
Using AF to Focus * fll:g"ilr::HUIiUIIIi! ;' ':IJII:::II.IIiBU;', ]I H][I• •~ ,,, OBIlImllIJ '.1:1111 i " HUll Live Mode and ~ (Face Detection) Live Mode Notes AF operation ~ Focusing will take slightly longer. ~ Even when focus has been achieved, pressing the <*> button will focus again. ~ The image brightness may change during and after the AF operation. ~ If the light source changes while the Live View image is displayed, the screen might flicker and focusing can be difficult.
Using AF to Focus"* ;;;. . . .lklf_n:I]UJI. . . .r. .] 111& Shooting conditions which can make focusing difficult: €& Low-contrast subjects such as the blue sky and solid-color, flat surfaces. ~ Subjects in low light. ~ Stripes and other patterns where there is contrast only in the horizontal direction. $JJ Under a light source whose brightness, color, or pattern keeps changing. ~ Night scenes or points of light. ~ Under fluorescent lighting or when the image flickers. ~ Extremely small subjects.
Using AF to Focus 1<- Quick Mode: Af. The dedicated AF sensor is used to focus in the One-Shot AF mode (p.64), using the same AF method as with viewfinder shooting. Although you can focus the target area quickly, the Live View image will be interrupted momentarily during the AF operation. 1 AF point Display the Live View image. • Press the <0> button. ~ The Live View image will appear on the LCD monitor. ~ The small boxes on the screen are the AF points, and the larger box is the magnifying frame.
Using AF to Focus * 3 Focus the subject. ~ ~, ~> ~, Aim the AF point over the subject, and hold down the < > button. The Live View image will turn off, the reflex mirror will go back down, and AF will be executed. When focus is achieved, the beeper will sound and the Live View image will reappear. The AF point used to focus will be displayed in red. * Take the picture. ~ ~ (j ~ Check the focus and exposure, then press the shutter button to take the picture (p.1 06).
Focusing Manually *: You can magnify the image and focus precisely manually. Set the lens focus mode switch to . ~ Turn the lens focusing ring to focus roughly. Move the magnifying frame. l$ ~ \ Magnifying frame Press the < ~:~ > key to move the magnifying frame to the position where you want to focus. To return the AF point to the center, press the < illJ > button. Magnify the image. ~ Press the < ~ > button. ~. The image within the magnifying frame will be magnified.
Notes About the Live View Image • Under low or bright light conditions, the Live View image might not reflect the brightness of the captured image. • If the light source within the image changes, the screen might flicker. If this happens, stop and resume the Live View shooting under the actual light source to be used. • If you point the camera in a different direction, it might throw off the Live View image's correct brightness momentarily. Wait until the brightness level stabilizes before shooting.
o Notes About the Shooting Results • When you shoot continuously with the Live View function for a long period, the camera's internal temperature may increase and it can degrade image quality. Terminate Live View shooting when not shooting images. @ Before taking a long exposure, stop Live View shooting temporarily and wait several minutes before shooting. This is to prevent image degradation. e Live View shooting in high temperatures and at high ISO speeds may cause noise or irregular colors.
Shooting Movies <." Set the Mode Dial to > to shoot movies. The movie file format will be MOV. o SO Cards for Movie Shooting When shooting movies, use a card with an SO speed Class 6 "CLASS@" or higher. If you use a card with a slower SO speed Class, the movie shooting and playback might not work properly. Also, a large-capacity card is recommended for movie shooting. [i] About Full HD 1080 Full HD 1080 indicates compatibility with HighDefinition with 1080 vertical pixels (scanning lines).
-" Shooting Movies Connecting the camera to a TV set is recommended to playback movies (p.156-157). r-----~-- 1 Set the Mode Dial to <." >. • The reflex mirror will make a sound, then the image will appear on the LCD monitor. Focus the subject. Before shooting a movie, autofocus or manual focus (p.111-118). • Press the < > button to focus in the current AF mode. (fj * Shoot the movie. @ ~. o Press the < 1::1 > button to start shooting the movie. To stop shooting the movie, press <0> again.
Movie Settings Function settings particular to movie shooting are explained here. Functions Set with a Menu Display the movie menu. ~. ~ Select the [.~] menu tab. The menu options displayed are explained below. • Movie-recording size [1920x1080] : Full HD (Full High-Definition) recording quality. [1280x720] : HD (High-Definition) recording quality. [640x480] : Standard recording quality. The screen format will be 4:3. Total Movie Recording Time and File Size Per Minute [1920x1080] 12 min. 49 min.
Movie Settings ~ Grid display With [Grid 1 #] or [Grid 2:mt$], you can display grid lines. • Metering timer You can change how long the AE lock is to be maintained with the button . • Sound recording When the sound recording is set to [On], monaural sound will be recorded with the built-in microphone. (An external microphone cannot be used.) The sound recording level will be adjusted automatically. f) Remote control You can use Remote Controller RC-1/RC-5 (sold separately, p.
Movie Settings 11111IE] ,] illUHI IlIIUlU JULIIIUJIJ• • nu. UI!!Ii1!1 !lIJ!UlI Ulllnl.1l1 a.lllliln; [l] $i @ By holding down the button and turning the <£83> dial, you can set the exposure compensation. In the movie shooting mode and Creative Zone modes, the setting will be the same for the Picture Style, white balance, image-recording quality, and exposure compensation (except M).
Movie Settings About the Information Display • Each time you press the < DISP. > button, the information display will change. AF mode ----.-------, · AFID : Live mode 1 ! · AF ~ : Face detection Live mode i · AFE: Quick mode r- Movie shooting remaining time/ I Elapsed time . r'-- Recording movie Magnifying frame Picture Style ...-.. White balance Movie-recording size _... ..
. . Notes on Movie Shooting Recording and Image Quality ~ At [1920x1080], the recorded frame rate is slower, so fast-moving subjects or scenes may look a little jerky. • If a single movie's file size reaches 4 GB, the movie shooting will stop automatically. To start movie shooting again, press the <0> button. (A new movie file starts being recorded.) iI If the attached lens has an Image Stabilizer, the Image Stabilizer will operate at all times even if you do not press the shutter button halfway.
-- Notes on Movie Shooting Camera's internal temperature increase and image degradation ~ If you continue to shoot movies for a prolonged period, the camera's internal temperature will increase. This can degrade the image quality. While not shooting, turn off the power. @ If you shoot under direct sunlight or high-temperature conditions, the icon (high internal temperature warning) may appear on the screen. If you keep shooting a movie with the warning icon displayed, the image quality might degrade.
Handy Features • Silencing the Beeper (p.130) .~ Card Reminder (p.130) ~ Setting the Image Review Time (p.130) ~ Setting the Auto Power-off Time (p.131) • Adjusting the LCD Monitor Brightness (p.131) ~ File Numbering Methods (p.132) tj Auto Rotate of Vertical Images (p.134) tj Checking Camera Settings (p.135) fi; Reverting the Camera to the Default Settings (p.136) .~ About Copyright Information (p.137) ~ Preventing the LCD Monitor from Turning off Automatically (p.
Handy Features IIi··,]] LilllIHlIl.I.JJr:U.IFrr w .P. 'II IlmJD Silencing the Beeper You can prevent the beeper from sounding when focus is achieved or during self-timer operation. Under the [~.] tab, select [Beep], then press < @ >. Select [Off] then press I <@>. IlmJD Card Reminder This prevents shooting if there is no card in the camera. Release shutter without card Enable Disable Under the [~.] tab, select [Release shutter without card], then press < @ >. Select [Disable], then press <@>.
I.,.' Handy Features . . . ._ _111. . . .I . '• • • • • •L. . . .I• •II• • • Ii!iI3:mJ Setting the Auto Power-off Time To save battery power, the camera turns off automatically after the set time of idle operation elapses. You can set this auto power-off time. When the camera has turned off due to auto power off, you can wake up the camera by pressing the shutter button halfway or any of the following buttons:
<[B> etc.Handy Features Imml File Numbering Methods The file number is like the frame number on a roll of film. The captured images are assigned a sequential file number from 0001 to 9999 and saved in one folder. You can change how the file number is assigned. The file number will appear on a computer in this format: IMG 0001.JPG. Under the [~'] tab, select [File numbering], then press < @ >. Follow the steps below to select a file numbering method, then press < @ >.
Handy Features 1:IIT·. ' ; : .. ! .·1 1M:.·; Lib II: .. flml :IL: :::.! Tn ...... ,. w : . [Auto reset]: Resets the file numbering to 0001 whenever the card is replaced. Each time you replace the card, the file numbering restarts from 0001. This is convenient if you want to organize images according to cards. If the replacement card contains images recorded previously, the file numbering of the new images might continue from the file numbering of the existing images in the card.
Handy Features i 1m! Itlt!]]1 IIf !II HII: HI 11111 I mil II I I j I Im!l Auto Rotate of Vertical Images Vertical images are rotated automatically so they are displayed vertically on the camera's LCD monitor and computer instead of horizontally. The setting of this feature can be changed. Under the [~.] tab, select [Auto rotate], then press < @ >. The available settings are described below. Select one, then press <@>. $ [OnO.
Handy Features : DIS~ Checking Camera Settings While the menu is displayed, press the < DISP. > button to display the camera's current settings. @ If; #ID While the menu is displayed, press the < DISP. > button to display the settings. Press the < DISP. > button again to return to the menu. Press the shutter button halfway to return to the shooting settings display. Settings Display Freespace Color space 532 MB"~" . . . Card remaining capacity Color space (p. 93) sRGB· . . ····w.
Handy Features mmg Reverting the Camera to the Default Settings * This is for reverting all the camera's shooting settings and Custom Functions to the default settings. This works in the < P > and other Creative Zone modes. p. 1 Select [Clear settings). 4) Under the [~:] tab, select [Clear settings],then press <@>. Select the desired setting. ~ To revert the shooting settings to the default, select [Clear all camera settings], then press <@>. ~.
Handy Features Hi··· lIB II·· Camera Settings 30 sec. 5[ Ii Movie Setti ngs Movie-recording size 1280x720 Live mode On Enable On Off 2 sec. 16 sec. 10 images Disable OnO. LCD brightness [lJ Custom Function settings, date/time, interface language, video system, and My Menu items will not change. Ii!1I3ml About Copyright Information '* If you use EOS Utility (provided software) to set your copyright information, the copyright information will be added to the image's Exif information.
Handy Features mmg Preventing the LCD Monitor from Turning off Automatically This prevents the display-off sensor from turning off the shooting settings display automatically when your eye nears the viewfinder eyepiece. Select [LCD auto off]" it mmg Under the [""] tab, select [LCD auto off], then press < @ >. Select [Disable], then press <@>. Changing the Shooting Settings Screen Color You can change the background color of the shooting settings screen. Select [Screen color].
mmJ Setting the Flash"* The built-in flash and external Speedlite settings can be set with the menu. The [External flash ***] menu options for external Speedlites will be applicable only to an attached EX-series Speedlite compatible with the respective functions. The setting procedure is the same as setting a camera menu function. Select [Flash control]. ~ ~ Under the [0·] tab, select [Flash control], then press <@>. The flash control screen will appear.
m3ml Setting the Flash * ilia: I: I !II!!! ·i IHli!liIl II II . . ·.llllll" [Built-in flash func. setting] and [External flash func. setting] Settable Functions •·•· • · .xterl1alflash . ... . •.•. Unc. setting] . . o 140 140 o o o Wirelesssetting* 85 141 0 * Regarding the [FEB] (Flash exposure bracketing), [Zoom], and [Wireless set.], refer to the Speed lite's instruction manual. ~ Flash mode With an external Speedlite, you can select the flash mode to suit your flash shooting.
li!iI3ml Setting the Flash * • Flash exposure compensation See "~ Flash Exposure Compensation" on page 85. $V E-TTL II For normal flash exposures, set it to [Evaluative]. If [Average] is set, the flash exposure will be averaged for the entire metered scene as with an external metering flash. Flash exposure compensation may be necessary depending on the scene, so this setting is for advanced users. • Clear Speedlite settings On the [External flash func. setting] screen, press the < DISP.
~t-CJt Automatic Sensor Cleaning Whenever you set the power switch to or , the Self Cleaning Sensor Unit operates to automatically shake off the dust on the front of the sensor. Normally, you need not pay attention to this operation. However, you can execute the sensor cleaning at anytime as well as disable it. Cleaning the Sensor Now *' I Select [Sensor cleaning]. Jt% [~:] Under the tab, select [Sensor cleaning], then press <@>. Select [Clean now ..o·].
Il!L§mJ Appending Dust Delete Data * ssw UUI !ltH Normally, the Self Cleaning Sensor Unit will eliminate most of the dust that might be visible on captured images. However, in case visible dust still remains, you can append the Dust Delete Data to the image to later erase the dust spots. The Dust Delete Data is used by Digital Photo Professional (provided software) to erase the dust spots automatically. Preparation ~ Get a solid-white object (paper, etc.).
Ii!iI3mJ Appending Dust Delete Data * II . . i.l) Ilillii!!IRilJll .. ::JI(lll... j] ; . !III Hm ] Ill. .~ . ill • 3 Photograph a solid-white object. ~ [] oOQoEJ ° \..J [] [J ~ ~. ~ At a distance of 20 cm - 30 cm / 0.7 ft. - 1.0 ft., fill the viewfinder with a patternless, solid-white object and take a picture. The picture will be taken in the aperturepriority AE mode with an aperture of f/22.
mmg Manual Sensor Cleaning * Dust which could not be removed by the automatic sensor cleaning can be removed manually with a blower, etc. The surface of the image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. Before cleaning the sensor, detach the lens from the camera. 1 Select [Sensor clean ing]. ~ Under the [~:] tab, select [Sensor cleaning], then press < @ >. Live View function settings Select [Clean manually].
li!il3ID.l Manual Sensor Cleaning ~ o \® '& @t tW @ 146 While cleaning the sensor, never do any of the following. If the power is cut off, the shutter will close and the shutter curtains and image sensor might get damaged. • Setting the power switch to . • Opening the battery compartment cover. • Opening the card slot cover. The surface of the image sensor is extremely delicate. Clean the sensor with care. Use a plain blower without any brush attached. A brush can scratch the sensor.
. . .. . . . . Image Playback This chapter explains features related to viewing photos and movies, going into more detail than in Chapter 2 "Basic Shooting and Image Playback" which explained the playback procedure. Here you will learn how to playback and erase photos and movies with the camera and viewing them on a TV set.
[B Searching for Images Quickly ~ Display Multiple Images on One Screen (Index display) Search for images quickly with the index display showing four or nine Images on one screen. Playback the image. ~ When you press the < [B > button the last captured image will be displayed. I Turn on the index display. !{J'> ~ .1 ; Press the < ~.e. > button. The 4-image index display will appear. The currently-selected image will be highlighted in a blue frame . Press the < ~.e.
anSEI.. t.;na.....··.· IE Searching for Images Quickly nill_.· _un.IIIII_II_ II. UI;II!!i!llill irn Jump through Images (Jump display) With the single image display, you can turn the < B > dial to jump through the images. ;~;lm(;;': Histogram Slide show :Image}ump wi" Grill Brightness 1 Select the jump method. ~ 10 images In the [EJ= Image jump w/ B ] menu, select the desired jump method from [1 image/10 images/100 images/ Date/Movies/Stills], then press <@>. Browse by jumping. ({& ~ ~. ~.
~/~ Magnified View I I ,. . . . . . . . . ._ . . . You can magnify the image by 1.5x to 10x on the LCD monitor. 1 Magnify the image. ~ During image playback, press the < e. > button. ~ The image will be magnified. 1j To increase the magnification, hold down the < e. > button. The image will continue to be magnified until it reaches the maximum magnification. ~ Press the < ~.q > button to reduce the magnification.
@ Rotating the Image You can rotate the displayed image to the desired orientation. 1 Select [Rotate]. @t Under the [Er] tab, select [Rotate], then press <@>. Select the image. qt @t 3 Press the < ~~ > key to select the image to be rotated. You can also select an image on the index display. Rotate the image. Each time you press < @ >, the image will rotate clockwise as follows: 90° ~ 270° ~ 0° To rotate another image, repeat steps 2 and 3.
-" Playing Movies Playback the image. • Press the < [B > button to display the Image. Select a movie. ~ tJ tJ Press the < ~~ > key to select the image. During the single-image display, the < ~ OJ> icon displayed on the upper left indicates that it is a movie. During the index display, the perforation on the left edge of the image indicates that it is a movie. Movies cannot be played on the index display, so press the < button to switch to the singleimage display. Press <@>.
.. .11I11]'11 5. T ... Playing Movies In' 'Ii? II .• II J111.[1 Function Playback Description :!> Exit Returns to the single-image display. ~ Play Pressing <@> toggles between play and pause. I~ Slow motion Adjust the slow motion speed by pressing the < ~~ > key. The slow-motion speed is indicated on the upper right. ~ First frame Displays the movie's first frame. ~ II Previous frame Each time you press < @ >, a single previous frame is displayed.
IJ!lmJ!J Slide Show (Auto Playback) You can playback the images in the card as an automatic slide show. Select [Slide show] . • Under the [EF] tab, select [Slide show], then press < @ >. Number of images to be played Select the images to be played back. ~ Press the < .... > key to select the top menu item, then press < @ >. Press the < .... > key to select one of the following: [QAII images/OStillsl .,. Moviesl [;IE] Date]. Then press <@>. $ffi ~ Function If you selected [l~ Date], press the < DISP.
m:3ml Slide Show (Auto Playback) Iml mill!!!! lUiII 1I' ••UIIIIIIII1I11IU1 11111 .11 HOII .Iim III nlll n lH1111I I II 3 Set the play time and repeat option. ~ f$ Press the < • .." > key to select [Set up], then press <@>. For still photos, set the [Play time] and [Repeat] options, then press the
button. [Play time] [Repeat] SlideshoIN Play time ~.~~.~.~ 1sec. • 2 sec. B sec. .5 ~ _w~~~ ..... ~~ ..~.w~.~ Start the slide show. f$ ~. f¥ Press the < • ..Viewing the Images on TV You can also view the still photos and movies on a TV set. Before connecting or disconnecting the cable between the camera and television, turn off the camera and television. * Adjust the movie's sound volume with the TV set. * Depending on the TV set, part of the image displayed might be cut off. Viewing on Non-HD (High-Definition) TV Sets Connect the provided AV cable to the camera. " Connect the AV cable to the camera's terminal.
Viewing the Images on TV Viewing on HD (High-Definition) TV Sets The HOMI Cable HTC-100 (sold separately) is required. 1 Connect the HOMI cable to the camera. ~ Connect the HOMI cable to the camera's < HDMI OUT> terminal. • With the plug's <.A HOMI MINI> logo facing the front of the camera, insert it into the terminal. Connect the HOMI cable to the TV set. ~ Connect the HOMI cable to the TV's HOMI IN port. 3 Turn on the TV and switch the TV's video input to select the connected port.
~ Protecting Images Protecting the image prevents it from being erased accidentally. 1 Select [Protect images]. ~ Under the ~, Image protect icon [Ef] tab, select [Protect images], then press <@ >. The protect setting screen will appear. Select the image and protect it. ~ Press the < key to select the image to be protected, then press <@>. t$} fW When an image is protected, the < e::l > icon will appear on the screen. To cancel the image protection, press <@> again.
ITD Erasing Images B'II[. .BIIII _ You can either select and erase images one by one or erase them in one batch. Protected images (p.158) will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect it. Erasing a Ia+. L image will erase both the RAW and JPEG images. o Erasing a Single Image 1 Playback the image to be erased. Press the < lID > button.
lID Erasing Images Ii ILl; $7 D pll: . LlilliiUlrr . D 1!IIii1iiIliOO:::' u r::I.I!': II .. n Select [Select and erase images]. ~ Select [Select and erase images], then press < @ > . Jt,. An image will appear. f;J Press the < ~.q > button to display the three-image view. To return to the single-image display, press the < ~ > button. 3 Select the images to be erased. ~ Select the images to be erased and press the <."If > key. The > icon will be displayed on the upper left.
DIS~ Shooting Information Display ]111111 When you press the < DISP. > button during single-image playback, you can switch the shooting information display. The most detailed shooting information is shown below. Exposure compensation amount Protect Flash exposure compensation amount Folder number - File number Histogram (Brightness/RGB) Shutter speed/.~ Recording time Metering mode . HHH Shooting model .
DISP. Shooting Information Display ~.IWr.~&'''''''''''Blgi:·i_ About the Histogram The brightness histogram display shows the exposure level distribution and overall brightness. The RGB histogram display is for checking the color saturation and gradation. The display can be switched with the [EJ Histogram] menu. [Brightness] Display Sample Histograms This histogram is a graph showing the distribution of the image's brightness level.
Printing Images and Transferring Images to aComputer Printing (p.164) You can connect the camera directly to a printer and print out the images in the card. The camera is compatible with "f( PictBridge" which is the standard for direct printing. f) Digital Print Order Format (DPOF) (p.173) DPOF (Digital Print Order Format) enables you to print images recorded in the card according to your printing instructions such as the image selection, quantity to print, etc.
Preparing to Print The direct printing procedure is done entirely with the camera while you look at the LCD monitor. Set up the printer. ifW For details, see the printer's instruction manual. Connect the camera to the printer. ~ @» I . I -I ~ I \ Use the interface cable provided with the camera. When connecting the cable plug to the camera's terminal, the cable plug's < ~ > icon must face the front side of the camera.
Preparing to Print Playback the image. Press the < [E > button. The image will appear, and the < t( > icon will appear on the upper left to indicate that the camera is connected to a printer. The < ~A?' > button lamp will light in blue. @, ;£ @ f$ aJ "® 1@ @; Movies cannot be printed. The camera cannot be used with printers compatible only with CP Direct or Bubble Jet Direct. Do not use any interface cable other than the one provided.
t( Printing ~ljB"I• • •J ~.·.n\'~':" •. •' "'W":wi, ~. The screen display and setting options will differ depending on the printer. Some settings might not be available. For details, see the printer's instruction manual. ____n_._· .._ _ Printer-connected icon "1 Select the image to be printed. ~o Check that the < t( > icon is displayed on the upper left of the LCD monitor. Press the < .... ~ > key to select the image to be printed. Qt Press <@>. The print setting screen will appear.
r( Printing "JJ.ilt.• •T ••II.re . P The paper type screen will appear. I.] Setting the Paper Type €ID .~ ~" Select the type of the paper loaded in the printer, then press <@ > . When using a Canon printer and Canon paper, read the printer's instruction manual to check what paper types can be used. The page layout screen will appear.
t(Printing [W~,lil iE '~ _ _ mffJiUil w. . . . .u.mli :.11 )~iII:'~l: 11.111 .:rBIIHlllli. Set the printing effects. t) ~:#.# ~ $* .t$ Function Set as necessary. If you need not set any printing effects, go to step 5. The screen display may differ depending on the printer. Select the option on the upper right, then press < @ >. Select the desired printing effect, then press <@>. If the < § > icon is displayed next to < I!lI3iI >, you can also adjust the printing effect (p.170).
11 .r:·. t(Printing 5 Set the date and file number imprinting. e Set as necessary. @ @ Select <~>, then press <@>. Set as desired, then press <@>. Set the number of copies. Set as necessary. • Select <~>, then press <@> . • Set the number of copies, then press <@>. 11· Start printing. ,~ Select [Print], then press <@> . ... The < ~1tV' > button's blue lamp will blink and the printing will start. []]@ @ ** @ $b ** With Easy printing, you can print another image with the same settings.
~(Printing I I I . !in n '- iiiB.IlIIl• •IdIU 1;]1. j itJE .:il111m: ' I . J ; Ii , §] Adjustment of Printing Effects ~ PtintEffect .QNatural M 'Brlghtness~"~" ,ww~··'-;;:·:~;\;:;ci~: Adjust levels ;a:Brightener Red~eye corr. Off Off Off In step 4 on page 168, select the printing effect. When the < § > icon is displayed next to < I!lIffiI >, press the < DISP > button. You can then adjust the printing effect. What can be adjusted or what is displayed will depend on the selection made in step 4.
r(Printing • •. . . . . ,_ _.:.i·~W. . . . .5'. . . . .I ~ Trimming the Image Tilt correction ~ 2 You can crop the image and print only the trimmed portion as if the image was recomposed. Do the trimming right before printing. If you set the trimming and then set the print settings, you may have to set the trimming again. On the print setting screen, select [Trimming]. :! Set the trimming frame size, position, and aspect ratio. &~ The image area within the trimming frame will be printed.
r( Printing • Depending on the printer, the trimmed image area might not be printed as you specified. ~ The smaller you make the trimming frame, the grainier the picture will look on the print. .~ While trimming the image, look at the camera's LCD monitor. If you look at the image on a TV screen, the trimming frame might not be displayed accurately. []] Handling Printer Errors If you resolve a printer error (no ink, no paper, etc.
'" Digital Print Order Format (DPOF) ..... You can set the print type, date imprinting, and file No. imprinting. The print settings will be applied to all print-ordered images. (They cannot be set individually for each image.) Setting the Printing Options Select [Print order] . .~'" Under the [El·] tab, select [Print order], then press < @ >. Select [Set up]. ($ Select [Set up], then press <@>. Set the option as desired. ~ Set the [Print type], [Date], and [File No.].
.-, Digital Print Order Format (DPOF) ] "aUIII!]" &1 __ ur~ Print type e e e e ,!ITflI.~[ 1i!il1'lld, BTr::lliiJM!!iIE[III!!!lllliI IiI Index Multiple, thumbnail images are printed on one sheet. Both Prints both the standard and index prints. Off File number rERlIB . . Standard Prints one image on one sheet. On Date i BmUIL On Off [On] imprints the recorded date on the print. [On] imprints the file No. on the print. Exit the setting. (~ Press the
button.~ Digital Print Order Format (DPOF) IIBE4• • •f. . . . . .If. . . . .I.U• •, .. . .f4. . . . . . . . . Print Ordering Sel.lmage Select and order images one by one. Press the < ~.<={ > button to display the three-image view. To return to the singleimage display, press the < 8.. > button. After completing the print order, press the
button to save the print order to the card. Quantity Total images selected Check mark Index icon ~ [Standard] [Both] Press the < Jt.,., Direct Printing with DPOF Ifl• •lkl:li• • •lilt• . , . With a PictBridge printer, you can easily print images with DPOF. ...•. _..__ __._._-----_._--_._---------_ _._-. Preparing to print. iLl See page 164. Follow the "Connecting the Camera to a Printer" procedure up to step 5. Under the [~r] tab, select [Print order]. Select [Print]. tW [Print] will be displayed only if the camera is connected to the printer and printing is possible. 4~ Set the [Paper settings]. (p.
rE... Transferring Images to a Computer 11' f. UI By connecting the camera to a computer, you can transfer images from the camera's card by operating the camera. This is called direct image transfer. Before connecting the camera to a computer, be sure to install the provided software (EOS DIGITAL Solution Disk on CDROM) in the computer. For instructions to install the provided software, see the separate sheet, CD-ROM Guide. o Preparation for Image Transfer Set the camera's power switch to .
lE. Transferring Images to a Computer Set the camera's power switch to . When the program selection dialog window appears on the computer, select [EOS Utility]. 1'f> The [EOS Utility] window will appear on the computer, and the direct image transfer screen will appear on the camera's LCD monitor. {f" [l]g (Ir If the [EOS Utility] window does not appear automatically, startup EOS Utility manually. Before disconnecting the cable, turn off the camera.
lEt. Transferring Images to a Computer Options other than [All images] are explained below. To start the image transfer, press the < ~IA.?' > button. New images Images which have not yet been transferred to the computer will be selected by the camera automatically and transferred. ttl Transfer order images You select the images and they are transferred to the computer in a batch. To select the images, see page 180. Select & transfer You select the images to be transferred individually.
E. Transferring Images to a Computer ·1 II illl! I HI 1 I [ill i i III U I . iii it i UL II Ilil!mJ Selecting the Images to be Transferred GtTransfer order Qty. of images Seljmage. 24 prints All image Under the [El"] tab, you can use [Transfer order] to select the images to be transferred to a computer. When you select [Transfer order images] on page 179, you can transfer the images set by the transfer order. rmmJ~ fp Sel.lmage Select and order images one by one. Press the < I&.
Customizing the Camera You can customize various camera features to suit your picture-taking preferences. You can do it with Custom Functions. Custom Functions can be set and used only in Creative Zone modes.
E!l Setting Custom Functions"* w....... D~. 1 Select [Custom Functions (C.Fn)). fJt Under the [~=J tab, select [Custom Functions (C.Fn)], then press < @ >. Select the Custom Function number. Press the < ..... ~ > key to select the Custom Function No., then press <@>. Change the setting as desired. ~1J f&i Press the < JJ..~ > key to select the setting (number), then press <@>. Repeat steps 2 and 3 if you want to set other Custom Functions.
li!iI3mJ Setting Custom Functions * U tJJlfPgBllItmmI_T :::=--. [IIIWBiJijI;lI:Wi .iiHi!lllrrd• • • •t" "Iilill Custom Functions OLV shooting C.Fn.. I: Exposure 1 2 3 Exposure level increments ISO expansion Flash sync. speed in Av mode p.184 ." Movie shooting o o o C.Fn II: Image 4 Long exposure noise reduction 5 High ISO speed noise reduction - - f--,. Highlight tone priority 6 Auto Lighting Optimizer 7 I p.185 p.186 o o o o (0 works) C.
mImJ Custom Function Settings *: .11 '1 _IIWII Custom Functions are organized into four groups based on the function type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Auto focus/Drive, C.Fn IV: Operation/Others. ---_. - - - - - - - - - - - _ . _ - , --,--_._------ C.Fn I: Exposure C.Fn-1 IiXROBUF. le".1 increments , 0: 1/3-stop 1: 1/2-stop Sets 1/2-stop increments for the shutter speed, aperture, exposure compensation, AEB, flash exposure compensation, etc.
Imml Custom Function Settings *: I . 11[IJIII C.Fn II: Image C.Fn-4 long exposure noise reduction 0: Off 1: Auto For 1 sec. or longer exposures, noise reduction is performed automatically if noise typical of long exposures is detected. This [Auto] setting is effective in most cases. 2: On Noise reduction is performed for all exposures of 1 sec. or longer. The [On] setting may be effective for noise that cannot be detected or reduced with the [Auto] setting.
m3mJ Custom Function Settings * HI 1111 ;, 'rDBIIIT~IIHt • •7R.; nr.llili!slJiil. . . . ._I'.lllilim C.Fn-6 I. Highlight tone priority 0: Disable 1: Enable Improves the highlight detail. The dynamic range is expanded from the standard 18% gray to bright highlights. The gradation between the grays and highlights becomes smoother. U With setting 1, noise in the shadow areas may be slightly more than usual. [l] With setting 1, the settable ISO speed range will be 200 - 3200.
~"'JlmT.'iHI~ I_·"I:_".iU•• __ m3IDl Custom Function Settings 1:l IIIIIl_ C.Fn III: Autofocus/Drive C.Fn-8 AF-assist beam firing The AF-assist beam can be emitted by the camera's built-in flash or by the external, EOS-dedicated Speedlite. 0: Enable 1: Disable The AF-assist beam is not emitted. 2: Only external flash emits If an external, EOS-dedicated Speedlite is attached, it will emit the AFassist beam when necessary. The camera's built-in flash will not fire the AF-assist beam.
~ Custom Function Settings * :. ..11]1[1: .·.....lli[ IItiIU;mJ I mil Ii: ~ I lIU !E !. iE . ... :1 ]1 C.Fn IV: Operation/Others C.Fn-10 ShutterlAE lock button 0: AF/AE lock 1: AE lock/AF Convenient when you want to focus and meter separately. Press the < > button to autofocus and press the shutter button halfway to perform AE lock. 2: AF/AF lock, no AE lock In the AI Servo AF mode, you can press the < > button to stop the AF operation momentarily.
li'il3mJ Custom Function Settings-(:( I"".'1"'I""I·~··~I.~I.,I. •'"1''I"'"I':·1'·:1.1 .. ;·"1:.1',,1&1;;I'~I,·I:• • • • • • • • • • .1'·1:.:1'··1·.···,...Ill"~~~ C.Fn-12 LCD display when power ON 0: Display When the power switch is turned on, the shooting settings will be displayed (p.42). 1: Retain power OFF status If you pressed the < DISP. > button and turned off the camera while the LCD monitor was off, the shooting settings will not be displayed when you turn on the camera again.
m3mJ Registering My Menu"* IfEfllL[' IT::::J!!rr:li_ _ Under the My Menu tab, you can register up to six menu options and Custom Functions whose settings you change frequently. Select [My Menu settings]. ~ Select [Register]. My Menu settings :,' Register Under the [*] tab, select [My Menu settings], then press <@>. ;' ~ Select [Register], then press < @ >. Sort Register the desired items. 41 Select the item, then press < @ >.
Reference This chapter provides reference information for camera features, system accessories, etc. The back of this chapter also has an index to make it easier to look up needed information.
Autofocus can fail to achieve focus (the focus confirmation light blinks) with certain subjects such as the following: <. > Subjects difficult to focus Low-contrast subjects (Example: Blue sky, solid-color walls, etc.) Subjects in low light {r} Extremely backlit or reflective subjects (Example: Car with a reflective body, etc.) Near and far subjects covered by an AF point (Example: Animal in a cage, etc.) Repetitive patterns (Example: Skyscraper windows, computer keyboards, etc.
Usi ng a Household Power Outlet II! !J§UUiHTUUII Jil With AC Adapter Kit ACK-E5 (sold separately), you can connect the camera to a household power outlet and not worry about the battery level. 1 Connect the power cord. ~ ~ Connect the power cord as shown in the illustration. After using the camera, unplug the power plug from the power outlet. Connect the DC Coupler. ~ Connect the cord's plug to the DC Coupler. Insert the DC Coupler.
Remote Controller RC-1/RC-5 (Sold separately) Remote controllers to shoot wirelessly up to about 5 meters/16.4 feet from the camera. The RC-1 can trip the shutter immediately or after a 2sec. delay, and the RC-5 trips the shutter after a 2-sec. delay. RC-1 RC-5 Remote control sensor ----+-+ Set the drive mode to < ~~ > (p.55). Point the remote controller toward the camera's remote control sensor and press the transmit button. ii? The camera will autofocus.
-.._1,.1.' 1•.;·: ;11·111 Remote Control Shooting 111• • • •111. Using the Eyepiece Cover If you take a picture without looking at the viewfinder, light entering the eyepiece can throw off the exposure. To prevent this, use the eyepiece cover (p.23) attached to the camera strap. During Live View shooting and movie shooting, attaching the eyepiece cover is unnecessary. Remove the eyecup. Push the bottom of the eyecup upward. Attaching the eyepiece cover.
External Speedlites . . . . . .IUI.Hi .. E£iililurill II EOS-dedicated, EX-series Speedlites Basically operates like a built-in flash for easy operation. When an EX-series Speedlite (sold separately) is attached to the camera, almost all the autoflash control is done by the camera. In other words, it is like a high-output flash attached externally in place of the built-in flash. For detailed instructions, see the EX-series Speed lite's instruction manual.
Canon Speedlites other than the EX-series W$ With an EZ/E/EG/ML/TL-series Speedlite set in TTL or A-TTL autoflash mode, the flash can be fired at full output only. Set the camera's shooting mode to (manual exposure) or < Av > (aperture-priority AE) and adjust the aperture setting before shooting. When using a Speedlite which has manual flash mode, shoot in the manual flash mode. Using Non-Canon Flash Units Sync Speed The camera can synchronize with compact, non-Canon flash units at 1/ 200 sec.
Function Availability Table \r.":i[.wjf~.'" .
Function Availability Table . : Set automatically 0: User selectable 0 : Not selectable Basic Zone Movie shooting CreativeZene MedeDlal 0 Evaluative ~ 3 (!) (!) a. ::::!. (!) 0 :J 1O m X "0 0 C1l c: ....
Men u Setti ngs ~ _ . .ml~_.··,:··N '~.,.11>::.,:-:'m fE . II 0" Shooting 1 (Red) Page Quality .L/.L/.M/.M/.S/~S/~+.L/~ 70 Beep On/Off 130 Release shutter without card Enable I Disable 130 Review time Off I 2 sec. I 4 sec, I 8 sec. I Hold 130 Peripheral illumination Enable I Disable correction 100 Red-eye On/Off Off I On 63 Flash control Flash firing I Built-in flash function setting I External flash function setting I External flash C. Fn setting I Clear external flash C.
Menu Settings :EI: Playback 2 (Blue) Page Histogram Brightness I RGB 162 Slide show Select the images, set the Play time and repeat settings for automatic playback 154 Image jump w/6 1 image / 10 images / 100 images / Date / Movies / Stills 149 Auto power off 30 sec. / 1min. /2 min. /4 min. /8 min. I 15 min. / Off File numbering Continuous I Auto reset / Manual reset Auto rotate OnO. Ian.
Menu Settings &11l1l1.]1I'.~1$1; :llij,CIII. . . . . . . . .Il• •UlIE 'BI":" liB Movie Shooting Mode Menu ." Movie (Red) Page / Grid 2 ttm Grid display Off / Grid 1 # Metering timer 4 sec, /16 sec. / 30 sec. / 1 min. / 10 min. /30 min. 124 Movie recording size 1920x1 080/ 1280x720 / 640x480 123 AF mode Live mode / Sound recording On/Off 124 Remote control Disable / Enable 124 I:il :.
Troubleshooting Guide .~. _ If a problem occurs, first refer to this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center. Power-Related Problems The battery cannot be recharged with the battery charger provided. ~. Do not recharge any battery pack other than genuine Canon Battery Pack LP-E5. The camera does not operate even when the power switch is set to .
Troubleshooting Guide The camera turns off by itself. ~ Auto power off is in effect. If you do not want auto power off to take effect, set [~. Auto power off] to [Off]. ~ Even if [~. Auto power off] has been set to [Off], the LCD monitor will still turn off after the camera is idle for 30 min. Press the < DISP. > button to turn on the LCD monitor. Shooting-Related Problems No images can be shot or recorded. ~ The card is not properly inserted (p.31).
Troubleshooting Guide The maximum burst during continuous shooting is lower. t~ Set the [~: Custom Functions (C.Fn)] menu's [High ISO speed noise reduction] to [Standard], [Low], or [Disable]. If it is set to [Strong], the maximum burst during continuous shooting will decrease (p.185). $1' If you shoot a subject which has fine detail (field of grass, etc.), the file size will be larger and the actual maximum burst will be lower than the number mentioned on page 70. ISO 100 cannot be set.
Troubleshooting Guide .BIIBI~~B-.,'.-.,,~.'IJ*I!:"",I1····I1· ····Il'·~'m:··,ul!':'Il~:~Il"·Il·:··.·,~l\!.··.···Ii·· '11'Il''Il'Il'····Il·-~"rll,Ii:I!'L.Il'•~. .... The camera makes a noise when it is shaken. ~ The built-in flash's pop-up mechanism moves slightly. This is normal. The shutter makes two shooting sounds during Live View shooting. ~i If you use flash or if ISO 3200 or higher is set, the shutter will make two sounds each time you shoot (p,1 07). The movie shooting terminates by itself.
Troubleshooting Guide Display & Operation Problems The LCD monitor does not display a clear image. «* If dust is adhering to the LCD monitor, wipe its surface with a lens cloth or soft cloth. w} In low or high temperatures, the LCD monitor display may seem slow or might look black. It will return to normal at room temperature. Few tabs and options are displayed on the menu screen. t.Jt In the Basic Zone modes and movie shooting mode, certain tabs and menu options are not displayed.
Troubleshooting Guide The shooting date and time displayed is incorrect. fit The correct date and time has not been set (p.29). No image appears on the TV screen. $if @, '81 Make sure the AV cable or HOMI cable's plug is connected all the way in (p.156, 157). Set the video OUT format (NTSC/PAL) to the same video format as the TV (p.201). Use the AV cable that came with the camera (p.156). Printing-Related Problems There are fewer printing effects than listed in the instruction manual.
If there is a problem with the camera, an error message will appear. Follow the onscreen instructions. Error No. Countermeasures No. ... ..... Error Message & Solution . Communications between the camera and lens is faulty. Clean the lens contacts. 01 Clean the electrical contacts on the camera and lens and use a Canon lens. (p.13, 16) Card cannot be accessed. Reinsert/change card or format card with camera. 02 Remove and install the card again, replace the card. or format the card (p.31, 40).
Eyepiece Extender EP-EX1511 ill 8 "~-ill ST-E2 Rubber Frame Ef E-series Dioptric Adjustment Lenses f: C ,;, Eyecup 270EX 430EX II 580EX II Macro Ring Lite MR-14EX Macro Twin Lite MT-24EX Bundled Accessories Ef ~~: c:!<[Ju;J ~.~" ~ Angle Finder C /v""";:;,n':,''''''',n""',,,,,' Semi Hard Case EH19-L ...
o; ~ ~ ~ Remote Controller RC-1 EF lenses HOMI Cable HTC-100 ED!: Remote Switch RS-60E3 EF-S lenses /I IIIIIIIIIII Remote Controller RC-5 ~ m(l]D . 9lJ ca~ -1IIIl:1IIIl,-------~c:: TVlVideo AVC-OC400 Q~0 - (©) .
Specifications _ml·:I!m.~~ ·~II"_K;".;. i. ·111 • -Type Type: Recording media: Image sensor size: Compatible lenses: Lens mount: Digital, single-lens reflex, AF/AE camera with built-in flash SO memory card, SDHC memory card 22.3 x 14.9 mm Canon EF lenses (including EF-S lenses) (35mm-equivalent focal length is approx.1.6 times the lens focal length) Canon EF mount - Image Sensor Type: Effective pixels: Aspect ratio: Dust delete feature: CMOS sensor Approx. 15.
Magnification: Eye point: Built-in dioptric adjustment: Focusing screen: Mirror: Depth-of-field preview: Approx. 0.87x (-1 m- 1 with 50mm lens at infinity) Approx. 19 mm (From eyepiece lens center at -1 m- 1 ) -3.0 - +1.0 m- 1 (dpt) Fixed, Precision Matte Quick-return type Provided • Autofocus Type: AF points: Meteri ng ra nge: Focus modes: AF-assist beam: TTL secondary image-registration, phase detection 9 AF points EV -0.
Specifications _ _ _ _. ,. . .]J. . . . .,. . . .'aRII_..ft1l.II11• •liBllltl • Flash Built-in flash: Retractable, auto pop-up flash Guide No.: 13/43 (ISO 100, in meters/feet) Flash coverage: 17mm lens angle of view Recycling time approx. 3 sec.
Specifications • LCD Monitor Type: Monitor size and dots: Coverage: Interface languages: TFT color liquid-crystal monitor (Brightness adjustable to 7 levels) 3-in. with approx. 920,000 dots (VGA) Approx. 100% 25 • Image Playback Image display formats: Single, Single + Info (Image-recording quality, shooting information, histogram), 4-image index, 9-image index, image rotate possible Zoom magnification: Approx. 1.
Ei[J_.I_I_ Specifications K • •_ . . . . .~~j• • •~IIj,tW.ir.tl;_i~it"tEI.'II, ... Battery life: (Based on CIPA testing standards) With viewfinder shooting: Approx. 400 shots at 23°C/73°F, approx. 380 shots at 0°C/32°F With Live View shooting: Approx. 170 shots at 23°C/73°F, approx. 160 shots at 0°C/32°F • Dimensions and Weight Dimensions (W x H x D): 128.8 x 97.5 x 61.9 mm 1 5.1 x 3.8 x 2.4 in. Weight: Approx. 480 g / 16.9 oz.
Specifications • EF-S18-55mm f/3.5-5.6 IS Diagonal extent: 74°20' - 27°50' Horizontal extent: 64°30' - 23°20' Vertical extent: 45°30' - 15°40' Lens construction: 11 elements in 9 groups Minimum aperture: f/22 - 36 Closest focusing distance: 0.25 m / 0.82 ft. (From image sensor plane) Max. magnification: 0.34x (at 55 mm) Field of view: 207 x 134 - 67 x 45 mm /8.1 x 5.3 - 2.6 x 1.8 in. (at 0.25 m) Image Stabilizer: Lens shift type Filter size: 58 mm Lens cap: E-58 Max. diameter x length: 68.5 x 70 mm /2.
Trademarks @} Adobe is a trademark of Adobe Systems Incorporated. Windows is a trademark or registered trademark of Microsoft Corporation in the United States and other countries. @i Macintosh and Mac OS is a trademark or registered trademark of Apple Inc. in @i the United States and other countries. The SDHC logo is a trademark. @ {m HDMI, HDMllogo, and High-Definition Multimedia Interface are a trademark or {it * registered trademark of HOMI Licensing LLC.
Safety Warnings Follow these safeguards and use the equipment properly to prevent injury, death, and material damage. Preventing SeriQus InjlJ~ Qr Death • To prevent fire, excessive heat, chemical leakage, and explosions, follow the safeguards below: - Do not use any batteries, power sources, and accessories not specified in this booklet. Do not use any home-made or modified batteries. - Do not short-circuit, disassemble, or modify the battery pack or back-up battery.
• If you drop the equipment and the casing breaks open to expose the internal parts, do not touch the internal parts due to the possibility of electrical shock. • Do not disassemble or modify the equipment. High-voltage internal parts can cause electrical shock. • Do not look at the sun or an extremely bright light source through the camera or lens. Doing so may damage your vision. ------- ---. • Keep the camera from the reach of small children. The neck strap can accidentally choke the child.
Digital Camera Model 05126231 Systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for class B digital devices, pursuant to Part 15 of the FCC Rules.
IMPORTANT SAFETY INSTRUCTIONS 1. SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for Battery Charger LC-E5 & LC-E5E. 2. Before using the charger, read all instructions and cautionary remarks on (1) the charger, (2) the battery pack, and (3) the product using the battery pack. 3. CAUTION - To reduce risk of injury, charge only the Battery Pack LP-E5. Other types of batteries may burst, causing personal injury and other damage. 4.
1st-curtain sync 140 2nd-curtain sync 140 2-sec.
Index 80 Depth-of-field preview Digital terminal 164, 177 36 Dioptric adjustment Direct printing --) Printing DPOF 173 Drive mode 68 Dust Delete Data 143 Erase (image) 159 Error codes 209 Flash 62 2nd-curtain sync 140 Built-in flash 62 Custom Functions 141 Effective range 62 External Speedlite 139, 196 FE lock 95 Flash exposure compensation 85 Flash off 52, 54 Flash-sync speed 184 Menu setting 139 Red-eye reduction 63 Evaluative metering 83 Flash exposure compensation 85 Exposure compensa
Index Highlight detail loss Highlight tone priority Histogram (Brightness/RGB) ICC profile Image Auto playback Erase Highlight alert.
Index ._-4:IIi.~IB::lrj.:'I;.··U] Microphone • • •E_]..; ID.]_.rl•.• i iil;]_!i[m.IIIIBISII 124 Mirror lockup 104, 187 Mode Dial 20 Monochrome 74 Movie Playback Recording size Shooting Still image shooting View on TV 152 123 121 125 156 My Menu 190 Neutral 74 Night Portrait 51 Night scene 48 Noise reduction High ISO speed Long exposure 68, 72, 185 81, 185 Nomenclature 16 - 22 NTSC 201 Picture Style Adjustment. Selection User defined 88 73 91 Pixels 70 Playback Portrait..
Index Remote control shooting 55, 69, 124, 194 Revert to default settings 136 134, 151 Rotate (image) Safety warnings 219 Saturation SD/SDHC card Sports 50 Spot metering 83 Standard 73 Stopped-down aperture 80 Strap 23 System map 210 Tone priority 186 89 ~ Card Self-timer.
Canon CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan U.S.A. - - - - CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 11042-1198, U.S.A. Far all inquires concerning this product, call toll free in the U.S. 1-800-0K-CANON CANADA - - - CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC. MONTREAL BRANCH 5990, C6te-de-Liesse, Montreal Quebec H4T 1V7, Canada CANON CANADA INC. CALGARY OFFICE 2828, 16th Street, N.E.
Canon Insert the battery. EOS 1I6/,Tli Attach the lens. When attaching an EF-S lens, align it with the white index on the camera. For other lenses, align it with the red index. EOS SOOi) 3 This quick guide e plain basic function setting and how to shoot and playback inlage . You can take this guide with you for shooting. For detailed instructions, refer to the EOS REBEL Tli!EOS SOOD Instruction Manual. English Edition CT1-1031-000 PRINTED IN JAPAN © CANON INC. 2009 ';'-=""3!~!=::::r,-.
Set the Mode Dial to <0> (Full Auto). All the necessary camera settings will be set automatically. Image Playback ~ ~ .. 11m 8 Q 7 I 100-0033 Focus the subject. Aim the AF point over the subject and press the shutter button halfway to autofocus. Index •................................: Magnify Take the picture. @ Press the shutter button completely to take the picture. ~.o.;-.;...- 9 [lI • ru~~~~~l\CoQ.J View the image. . The captured image will be displayed for about 2 sec.
Preparation Menu Settings •• • • Menu Operations
--+-~~+~Q~~~~ button ;:l! ~ ;i!(;l f(;1 f(;1 I QualitY <@> LCD Beep button ... . . ] On Release shutter without card Review time 2sec. Peripheral iIIumin. correct. Red-eye On/Off Off Flash control ---+-Il~ monitor Cross keys El" Playback 1 1. Press the button to display the menu. 2. Press the < .... ~ > key to select the tab, then press the < JJi..T > key to select the desired item. 3. Press <@> to display the setting. 4.~: Set-up 3 .~ Movie shooting mode I t Image-recording Quality • Select [01" Quality], then press <@>. • Press the <~~> key to select the quality, then press <@>. Image-recording quality Pixels Possible shots @ Quick Control Screen • With the shooting settings are displayed, press <@> . .. The Quick Control screen will appear. I l 1/125 l/lL F80 . AUT·00+ J ,,1m] Aperture Shutter speed Exposure compensation/ AEB setting Shooting mode Image-recording quality l L:=.:L:2••1••0..
Shooting Operation l Shooting Settings Display Nomenclature Aperture Mode Dial Shutter speed <~> Flash button Exposure level indicator Shooting mode Picture Style l Main Dial pointer , I S O speed 1/125 F8.0 1ml16~Flash exposure ~-~••1..f9u 1.~2 lB 111J3 compensation -p ·I • ·1~.-sJ ~~.
Basic Zone Modes Creative Zone Modes All the settings necessary for shooting are set automatically. You just press the shutter button, and the camera does the rest. o Full Auto ~ Creative Auto ---~.~ ~l Portrait A& Landscape (Displayed only when <@» is set.) \~ Close-up ~ Sports • Press < @ >, then press the < ..:~ > ~ Night Portrait key to select the function. Flash Off • Turn the < B > dial to set the function. m You can change the camera settings as desired to shoot in various ways.
ISO: ISO Speed * • Press the < ISO > button. • Turn the dial or press the < .... ~ > key to select the ISO speed. • When "AUTO" is selected, the ISO speed is set automatically. When you press the shutter button halfway, the ISO speed setting will be displayed. • Set the lens focus mode switch to . • Press the <~ AF> button. • Press the < .... ~ > key to select the AF mode, then press <@>.
o Live View Shooting '* ." Shooting Movies • Press the < 0 > button to display the Live View image. • Set the Mode Dial to * • Press the < * > button to focus. • Press the shutter button to take the picture. • To change the Live View settings, use the [": Live View function settings] menu. Battery Life with Live View Shooting Temperature At 23°C / 73°F No Flash Approx. 190 shots 50% Flash Use Approx. 170 shots <'''' >. • Press the < > button to focus.
9~~ n\ 0~~ ./~"~ Canon 0,° STEP UP PHOTOGRAPHY ·.fJv/)o.) Accessories to enhance your creativity ~ Q,0 ~ S~I ~y"'o ~ 1 111111111111111 Q -r \ CTO-7247-000 -<>(,) ~ ~ ~ ; en ::J ~ EOS DICiITAL <-. Q) "tJ 0, ::J CTO-7247 .
Canon Windows Vista SP1 Windows XP SP2/SP3 Mac as x 10.4 Mac as x 10.5 CD-ROM Guide -( ::t 7.. ¥ ~ 1I')v '/ I) .3. - ::/ :1:"- ¥ -( 7. 7 English EOS DIGITAL Solution Disk EOS DIGITAL Solution Disk EOS Utility EOS Utility 1J.><51:IU:JY1rmllOt." llIll>i!!Ht CUJ!:!!V!!JJi!!j) O)I(:J:JY",O)JIiUJi6a;, tJ'><50);§!iIll)E, I( :J:J Y~jfl~J;ta:C'1rl'J3LI:W?:'fr
Canon Windows Vista SPl Windows XP SP2/SP3 Guide sur CD-ROM • Fran{:ais Digital Photo Professional Guia en CD-ROM ZoomBrowser EX (Win) IlmageBrowser (Mac) Es un software que permite co nectar su ordenador con la camara para transferir imagenes (fotosl videos) lomadas con la camara a su ordenador, definir los distintos ajustes de la camara y tomar fotograffas de forma remota desde su ordenador. Este software esta recomendado para usuarios que toman, mayoritariamente, imagenes RAW.
IK9-6231-002 () --i o I -......I I\.
TryMy Ptio1: Your Images Printed Free 1. Choose your favorite photo 2. Visit the Try My Photo website and follow the instructions: www.usa.canon.comjtrymyphoto 3. Canon will print your image using a select Canon Printer and mail your printed image for free* *Please refer to the Try My Photo website Terms & Conditions.
Visit www.registercanon.com to register your new EOS camera today and receive the following: • Automatic notification of firmware and software updates • Priority telephone support* • Exclusive priority e-mail support address* There is no charge to register or for the benefits offered. * These benefits valid in the U.S. only. Please read the Terms and Conditions at www.registercanon.com for complete details. Can 011 For accessories and other supplies visit www.estore.usa.canon.
Canon CANON" EOS Digital Camera™ and Accessories Limited WarrantyFor U.S.A. & Canada Only The IlfI1lt&d warranty set tonh below IS g'ven b~ Canon U,S,A" Inc. (Canor> U SAl in 1M United Slates or Clloon Canada Inc, (Canon Canada) in Canada w,th lespecllo the Canon bfaod EOS Oogllal Camera. as well as W,lh ,espect to the accessories package(! w,th th,s hm,ted WlllIClnTy and e registratoon card accompanyll'lg th,s lim~ed waflanty (collel;t,ve!y tr.e ·Products")'.
Ca-on II I Garant" IImltee des appar"ls photo numellques EOS Digital Camera" et des accessOires de CANON Pour 105 Etats-UnlS etle Canada seulement La presente garan!"" hmMe est foomoe pal Canon U.S,A .. Inc (Canon U,S.A) aux flats-Unis OIl Canon Canada loco (Canon Canada) au ea"