Owner's Manual
Table Of Contents
- Advanced User Guide
- Contents
- Introduction
- Basic Network Settings
- Preparation
- Displaying the Connection Wizard
- Checking the Type of Access Point
- Connecting via WPS (PBC Mode)
- Connecting via WPS (PIN Mode)
- Connecting to a Detected Network Manually
- Connecting to a Network Manually
- Connecting Using an Infrastructure
- Connecting in Camera Access Point Mode
- Setting the IP Address
- Configuring Settings for the Communication Function
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating the Camera Using Browser Remote
- Linked Shooting
- Synchronizing the Camera Time
- Terminating the Connection and Reconnecting
- Checking and Configuring Network Settings
- Troubleshooting
- Reference
- Trademarks
- Quick Start Guide
- Warranty
Configuring Browser Remote Connection Settings
These instructions are continued from Configuring Settings for the Communication Function.
Enter a login name and password for connecting to the camera from a computer or
smartphone, etc. The login name and password you specify here are used when connecting
to the camera.
1.
Select [Full control] or [Browser *].
With Browser Remote, you can connect to the camera from up to three
devices at the same time.
[Full control] is an account that allows you to use all functions of
Browser Remote. Full control can only be used on one device.
[Browser *] is an account that allows you only to view and save the
images in the camera to a device. Browser* can be used on up to two
devices.
2.
Set the [Login name] and [Password].
Select [Login name] and [Password] and enter the user name and
password using the displayed virtual keyboard ( ).
Select [OK] to return to the screen in step 1. Perform the actions in
steps 1 and 2 for the account to be used.
102