Owner's Manual
Table Of Contents
- Advanced User Guide
- Contents
- Introduction
- Basic Network Settings
- Preparation
- Displaying the Connection Wizard
- Checking the Type of Access Point
- Connecting via WPS (PBC Mode)
- Connecting via WPS (PIN Mode)
- Connecting to a Detected Network Manually
- Connecting to a Network Manually
- Connecting Using an Infrastructure
- Connecting in Camera Access Point Mode
- Setting the IP Address
- Configuring Settings for the Communication Function
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating the Camera Using Browser Remote
- Linked Shooting
- Synchronizing the Camera Time
- Terminating the Connection and Reconnecting
- Checking and Configuring Network Settings
- Troubleshooting
- Reference
- Trademarks
- Quick Start Guide
- Warranty
6.
Adjust the focus.
Using Autofocus
If you selected [AF button] on the [AF for still photo shooting] menu,
AF is performed when the AF button (13) is selected.
If you selected [Shutter button for AF/shooting] on the [AF for still
photo shooting] menu, AF is performed when the Shutter button (4) is
selected and then released during shooting.
Focusing Manually
You can toggle between showing and hiding the MF button (25) by
selecting the MF switching button (5).
Select the MF button (25) to adjust the focus. To focus more closely,
press [ ]. To focus farther away, press [ ].
Three levels of focus adjustment are available.
[ ] [ ]: Largest increment
[ ] [ ]: Intermediate increment
[
] [ ]: Smallest increment
118