Owner's Manual
Table Of Contents
- Advanced User Guide
- Contents
- Introduction
- Basic Network Settings
- Preparation
- Displaying the Connection Wizard
- Checking the Type of Access Point
- Connecting via WPS (PBC Mode)
- Connecting via WPS (PIN Mode)
- Connecting to a Detected Network Manually
- Connecting to a Network Manually
- Connecting Using an Infrastructure
- Connecting in Camera Access Point Mode
- Setting the IP Address
- Configuring Settings for the Communication Function
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating the Camera Using Browser Remote
- Linked Shooting
- Synchronizing the Camera Time
- Terminating the Connection and Reconnecting
- Checking and Configuring Network Settings
- Troubleshooting
- Reference
- Trademarks
- Quick Start Guide
- Warranty
4.
Specify the password.
Press < > to display the virtual keyboard ( ) and enter an eight-
digit password.
Use the password configured here when you connect the sender
camera with a computer.
Select [OK] to proceed to the next screen.
Stay on the displayed screen.
5.
Prepare the receiver cameras.
Perform Step 2 and 3 for "Preparing Receiver Cameras" in Basic
Linked Shooting.
6.
Connect the sender camera and receiver cameras.
Perform Step 2 and 3 for "Connecting the Sender Camera and
Receiver Cameras" described in Basic Linked Shooting.
138