Owner's Manual
Table Of Contents
- Advanced User Guide
- Contents
- Introduction
- Basic Network Settings
- Preparation
- Displaying the Connection Wizard
- Checking the Type of Access Point
- Connecting via WPS (PBC Mode)
- Connecting via WPS (PIN Mode)
- Connecting to a Detected Network Manually
- Connecting to a Network Manually
- Connecting Using an Infrastructure
- Connecting in Camera Access Point Mode
- Setting the IP Address
- Configuring Settings for the Communication Function
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating the Camera Using Browser Remote
- Linked Shooting
- Synchronizing the Camera Time
- Terminating the Connection and Reconnecting
- Checking and Configuring Network Settings
- Troubleshooting
- Reference
- Trademarks
- Quick Start Guide
- Warranty
Connecting the Sender Camera with a Computer
To connect the sender camera with your computer, use the wireless LAN device search
function that is available on the computer.
For details of the wireless LAN search function, refer to the computer's instruction
manual.
Before you perform this operation, set up your WFT account on the [Browser Remote
settings] screen in advance ( ).
1.
From your computer, find the sender camera on the network.
Use your computer's wireless LAN device search function that is
available on the computer.
2.
Connect to the sender camera.
Select a device having the same ID as the sender camera's SSID you
noted in Step 5 of Checking the Camera's IP Address and SSID.
In the password field, enter the password specified in Step 4 of
Connecting the Sender Camera and Receiver Cameras.
Your computer is now connected to the sender camera.
3.
Display Browser Remote.
For the operation procedure, see Operating the Camera Using Browser
Remote.
For the URL entry field, enter the IP address of the sender camera you
noted in Step 5 of Checking the Camera's IP Address and SSID.
To log in, enter the WFT account information ([Login name] (user
name) and [Password]) you set up in advance.
142