Owner's Manual
Table Of Contents
- Advanced User Guide
- Contents
- Introduction
- Basic Network Settings
- Preparation
- Displaying the Connection Wizard
- Checking the Type of Access Point
- Connecting via WPS (PBC Mode)
- Connecting via WPS (PIN Mode)
- Connecting to a Detected Network Manually
- Connecting to a Network Manually
- Connecting Using an Infrastructure
- Connecting in Camera Access Point Mode
- Setting the IP Address
- Configuring Settings for the Communication Function
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating the Camera Using Browser Remote
- Linked Shooting
- Synchronizing the Camera Time
- Terminating the Connection and Reconnecting
- Checking and Configuring Network Settings
- Troubleshooting
- Reference
- Trademarks
- Quick Start Guide
- Warranty
3.
Change the settings using the connection wizard.
See the subsequent operation after Displaying the Connection Wizard.
Change from list
Using the comm settings and function settings saved in the camera, you can change the
contents of the connection settings saved in the camera. You can also register a settings
name.
1.
Display the [Connection settings] screen.
Perform Step 1 through 3 for Checking and Editing Connection
Settings.
2.
Select [Change from list].
3.
Change the settings by selecting an item.
Settings name
• Select this option to name the settings. Enter text by using the virtual keyboard ( ).
158