Owner's Manual
Table Of Contents
- Advanced User Guide
- Contents
- Introduction
- Basic Network Settings
- Preparation
- Displaying the Connection Wizard
- Checking the Type of Access Point
- Connecting via WPS (PBC Mode)
- Connecting via WPS (PIN Mode)
- Connecting to a Detected Network Manually
- Connecting to a Network Manually
- Connecting Using an Infrastructure
- Connecting in Camera Access Point Mode
- Setting the IP Address
- Configuring Settings for the Communication Function
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating the Camera Using Browser Remote
- Linked Shooting
- Synchronizing the Camera Time
- Terminating the Connection and Reconnecting
- Checking and Configuring Network Settings
- Troubleshooting
- Reference
- Trademarks
- Quick Start Guide
- Warranty
Saving and Loading the Settings
Saving the Settings
Loading the Settings
You can save the connection settings onto a card and apply the settings to another camera.
In addition, you can apply the connection settings that are configured on another camera to
the camera you will use.
Saving the Settings
1.
Display the [Connection settings] screen.
Perform Step 1 through 3 for Checking and Editing Connection
Settings.
2.
Select [Save/load settings on card].
3.
Select [Save settings to card].
160