Owner's Manual
Table Of Contents
- Advanced User Guide
- Contents
- Introduction
- Basic Network Settings
- Preparation
- Displaying the Connection Wizard
- Checking the Type of Access Point
- Connecting via WPS (PBC Mode)
- Connecting via WPS (PIN Mode)
- Connecting to a Detected Network Manually
- Connecting to a Network Manually
- Connecting Using an Infrastructure
- Connecting in Camera Access Point Mode
- Setting the IP Address
- Configuring Settings for the Communication Function
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating the Camera Using Browser Remote
- Linked Shooting
- Synchronizing the Camera Time
- Terminating the Connection and Reconnecting
- Checking and Configuring Network Settings
- Troubleshooting
- Reference
- Trademarks
- Quick Start Guide
- Warranty
4.
Select [OK].
The camera will automatically configure the file name starting from
WFTNPF01 and up to 40.NIF. By pressing the < > button, you
can specify a file name. (The length is fixed to eight characters.)
The settings are saved on the card.
The settings information file is saved in the location where the card is
opened (on the root directory).
Caution
Up to 40 settings information files can be saved on a card for the camera. To save
41 or more files, use another card.
161