Owner's Manual
Table Of Contents
- Advanced User Guide
- Contents
- Introduction
- Basic Network Settings
- Preparation
- Displaying the Connection Wizard
- Checking the Type of Access Point
- Connecting via WPS (PBC Mode)
- Connecting via WPS (PIN Mode)
- Connecting to a Detected Network Manually
- Connecting to a Network Manually
- Connecting Using an Infrastructure
- Connecting in Camera Access Point Mode
- Setting the IP Address
- Configuring Settings for the Communication Function
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating the Camera Using Browser Remote
- Linked Shooting
- Synchronizing the Camera Time
- Terminating the Connection and Reconnecting
- Checking and Configuring Network Settings
- Troubleshooting
- Reference
- Trademarks
- Quick Start Guide
- Warranty
5.
Select [OK].
Information of the settings file will be loaded into the selected settings
number.
Caution
Even when 41 or more settings information files are loaded onto the card through a
computer, the load settings screen of the camera only displays up to 40 files. To
load more than 41 files, use a card that does not contain the previously loaded
settings files, and load the rest of the settings information files.
Note
From [ : Save/load cam settings on card], you can save all comm settings in the
camera to the card and read all comm settings from a card in another camera.
163