Owner's Manual
Table Of Contents
- Advanced User Guide
- Contents
- Introduction
- Basic Network Settings
- Preparation
- Displaying the Connection Wizard
- Checking the Type of Access Point
- Connecting via WPS (PBC Mode)
- Connecting via WPS (PIN Mode)
- Connecting to a Detected Network Manually
- Connecting to a Network Manually
- Connecting Using an Infrastructure
- Connecting in Camera Access Point Mode
- Setting the IP Address
- Configuring Settings for the Communication Function
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating the Camera Using Browser Remote
- Linked Shooting
- Synchronizing the Camera Time
- Terminating the Connection and Reconnecting
- Checking and Configuring Network Settings
- Troubleshooting
- Reference
- Trademarks
- Quick Start Guide
- Warranty
Preparation
[FTP trans.]
[EOS Utility]
[Browser Remote]
[LinkedShot]
[Sync time between cameras]
When connecting via Wireless LAN
[FTP trans.]
A computer with one of the following operating systems is needed. In addition, the
computer must be set up as an FTP server in advance.
• Windows 10 (ver. 1607 or later)
• Windows 8.1, Windows 8.1 Pro
For instructions on setting up a computer as an FTP server, refer to the documentation
provided with each device or contact the manufacturer.
[EOS Utility]
Requires a computer with EOS Utility (EOS software) installed.
For EOS Utility installation instructions, visit the Canon website.
[Browser Remote]
Use of [Browser Remote] requires a device on which one of the following browsers is
installed.
• iOS13: Safari 13
• iPadOS13: Safari 13
• Android 8, 9, 10: Chrome
• macOS: Safari 13
• Windows 10: Chrome
• Windows 10: Edge
* Operation on the above web browsers cannot be guaranteed for all terminals.
* Not available unless the web browser is set to allow cookies.
* Not available unless the web browser is set to use JavaScript.
* Movies cannot be played back unless the web browser supports HTML 5.
17