Owner's Manual
Table Of Contents
- Advanced User Guide
- Contents
- Introduction
- Basic Network Settings
- Preparation
- Displaying the Connection Wizard
- Checking the Type of Access Point
- Connecting via WPS (PBC Mode)
- Connecting via WPS (PIN Mode)
- Connecting to a Detected Network Manually
- Connecting to a Network Manually
- Connecting Using an Infrastructure
- Connecting in Camera Access Point Mode
- Setting the IP Address
- Configuring Settings for the Communication Function
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating the Camera Using Browser Remote
- Linked Shooting
- Synchronizing the Camera Time
- Terminating the Connection and Reconnecting
- Checking and Configuring Network Settings
- Troubleshooting
- Reference
- Trademarks
- Quick Start Guide
- Warranty
3.
Select an item to configure.
FTP transfer settings
Browser Remote settings
802.1X authentication
FTP transfer settings
To configure the FTP transfer-related settings and power-saving function, select [FTP
transfer settings].
Automatic transfer / Transfer type/size / Transfer with SET / Set root certif
• For details, see Transferring Images to an FTP Server.
Power saving
• When this option is set to [Enable], after a certain period of idle time, the transmitter
is disconnected from the LAN by being logged off from the FTP server. When the
transfer of an image is executed, the transmitter automatically reconnects to the
network. If you prefer not to disconnect from the LAN, set to [Disable].
172