Owner's Manual
Table Of Contents
- Advanced User Guide
- Contents
- Introduction
- Basic Network Settings
- Preparation
- Displaying the Connection Wizard
- Checking the Type of Access Point
- Connecting via WPS (PBC Mode)
- Connecting via WPS (PIN Mode)
- Connecting to a Detected Network Manually
- Connecting to a Network Manually
- Connecting Using an Infrastructure
- Connecting in Camera Access Point Mode
- Setting the IP Address
- Configuring Settings for the Communication Function
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating the Camera Using Browser Remote
- Linked Shooting
- Synchronizing the Camera Time
- Terminating the Connection and Reconnecting
- Checking and Configuring Network Settings
- Troubleshooting
- Reference
- Trademarks
- Quick Start Guide
- Warranty
802.1X authentication
Selecting [802.1X authentication] allows you to configure 802.1X authentication on the
setup wizard and to confirm or delete the settings.
Set it when connecting to a network that requires 802.1X authentication.
Save the certificate required for the 802.1X authentication method to the card inserted in the
camera in advance.
The file types and file names that can be read by the camera are as follows.
Type File name
Root certificate
8021X_R.CER
8021X_R.CRT
8021X_R.PEM
Client certificate
8021X_C.CER
8021X_C.CRT
8021X_C.PEM
Secret key 8021X_C.KEY
This transmitter supports the following protocols:
Protocol Supported authentication method
EAP-TLS X.509
EAP-TTLS MS-CHAP v2
PEAP MS-CHAP v2
Setup wizard
• Follow the instructions on the wizard and configure the authentication settings ( ).
Confirm settings
• Select this option to verify the contents of authentication settings.
174