Owner's Manual
Table Of Contents
- Advanced User Guide
- Contents
- Introduction
- Basic Network Settings
- Preparation
- Displaying the Connection Wizard
- Checking the Type of Access Point
- Connecting via WPS (PBC Mode)
- Connecting via WPS (PIN Mode)
- Connecting to a Detected Network Manually
- Connecting to a Network Manually
- Connecting Using an Infrastructure
- Connecting in Camera Access Point Mode
- Setting the IP Address
- Configuring Settings for the Communication Function
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating the Camera Using Browser Remote
- Linked Shooting
- Synchronizing the Camera Time
- Terminating the Connection and Reconnecting
- Checking and Configuring Network Settings
- Troubleshooting
- Reference
- Trademarks
- Quick Start Guide
- Warranty
What to check on the proxy server
Is the power of the proxy server turned on?
• Turn on the proxy server.
Is the proxy server working correctly?
• Check the proxy server settings to make sure it is working correctly as a proxy
server.
• If applicable, obtain the proxy server's address setting and port number from your
network administrator and enter them on the transmitter.
What to check on the network as a whole
Does your network include a router or similar device that serves as a gateway?
• If applicable, obtain the network gateway address from your network administrator
and enter it on the transmitter.
• Make sure that the gateway address setting is correctly entered on all network
devices, including the transmitter.
What to check on the network as a whole
Does your network include a router or similar device that serves as a gateway?
• If applicable, obtain the network gateway address from your network administrator
and enter it on the transmitter ( , ).
• Make sure that the gateway address setting is correctly entered on all network
devices, including the transmitter.
43: Cannot connect to FTP server. Error code received from server.
What to check on the proxy server
Is the power of the proxy server turned on?
• Turn on the proxy server.
Is the proxy server working correctly?
• Check the proxy server settings to make sure it is working correctly as a proxy
server.
• If applicable, obtain the proxy server's address setting and port number from your
network administrator and enter them on the transmitter.
183