Owner's Manual
Table Of Contents
- Advanced User Guide
- Contents
- Introduction
- Basic Network Settings
- Preparation
- Displaying the Connection Wizard
- Checking the Type of Access Point
- Connecting via WPS (PBC Mode)
- Connecting via WPS (PIN Mode)
- Connecting to a Detected Network Manually
- Connecting to a Network Manually
- Connecting Using an Infrastructure
- Connecting in Camera Access Point Mode
- Setting the IP Address
- Configuring Settings for the Communication Function
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating the Camera Using Browser Remote
- Linked Shooting
- Synchronizing the Camera Time
- Terminating the Connection and Reconnecting
- Checking and Configuring Network Settings
- Troubleshooting
- Reference
- Trademarks
- Quick Start Guide
- Warranty
2.
Select a key index.
The [Key index] screen is displayed only if the access point uses WEP
encryption.
Select the key index number specified for the access point.
Select [OK] to proceed to the next screen.
3.
Enter the encryption key.
Press < > to display the virtual keyboard ( ), then enter the
encryption key.
Select [OK] to establish a connection with the access point.
When a connection with the access point is established, the next
screen is displayed.
Go to Setting the IP Address.
30