Owner's Manual
Table Of Contents
- Advanced User Guide
- Contents
- Introduction
- Basic Network Settings
- Preparation
- Displaying the Connection Wizard
- Checking the Type of Access Point
- Connecting via WPS (PBC Mode)
- Connecting via WPS (PIN Mode)
- Connecting to a Detected Network Manually
- Connecting to a Network Manually
- Connecting Using an Infrastructure
- Connecting in Camera Access Point Mode
- Setting the IP Address
- Configuring Settings for the Communication Function
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating the Camera Using Browser Remote
- Linked Shooting
- Synchronizing the Camera Time
- Terminating the Connection and Reconnecting
- Checking and Configuring Network Settings
- Troubleshooting
- Reference
- Trademarks
- Quick Start Guide
- Warranty
Smartphone screen (sample)
Activate the Wi-Fi function of the target device, then select the SSID
(network name) displayed on the camera's monitor.
For the password, enter the encryption key (password) displayed on
the camera's monitor.
When a connection is established, the setting screen for the relevant
communication function is displayed.
Go to step 2 in Configuring Settings for the Communication Function.
Note
When connecting by selecting [Easy connection], "_Canon0A" is displayed at the
end of the SSID.
41