Owner's Manual
Table Of Contents
- Advanced User Guide
- Contents
- Introduction
- Basic Network Settings
- Preparation
- Displaying the Connection Wizard
- Checking the Type of Access Point
- Connecting via WPS (PBC Mode)
- Connecting via WPS (PIN Mode)
- Connecting to a Detected Network Manually
- Connecting to a Network Manually
- Connecting Using an Infrastructure
- Connecting in Camera Access Point Mode
- Setting the IP Address
- Configuring Settings for the Communication Function
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating the Camera Using Browser Remote
- Linked Shooting
- Synchronizing the Camera Time
- Terminating the Connection and Reconnecting
- Checking and Configuring Network Settings
- Troubleshooting
- Reference
- Trademarks
- Quick Start Guide
- Warranty
Configuring FTP Server Connection Settings
These instructions are continued from Configuring Settings for the Communication Function.
1.
Select an FTP mode.
To perform a secure FTP transfer using a root certificate, select
[FTPS]. For root certificate settings, see Importing a Root Certificate for
FTPS.
To perform a secure FTP transfer using an SSH connection, select
[SFTP]. Configure the login settings to be used in step 5.
Select [OK] to proceed to the next screen.
2.
Select [Address setting].
Select [OK] to proceed to the next screen.
If you have set the IP address setting to [Auto setting] or the DNS
address setting to [Manual setting], the virtual keyboard is displayed.
If you have set the DNS address setting to [Disable], the number entry
screen is displayed.
55