Owner's Manual
Table Of Contents
- Advanced User Guide
- Contents
- Introduction
- Basic Network Settings
- Preparation
- Displaying the Connection Wizard
- Checking the Type of Access Point
- Connecting via WPS (PBC Mode)
- Connecting via WPS (PIN Mode)
- Connecting to a Detected Network Manually
- Connecting to a Network Manually
- Connecting Using an Infrastructure
- Connecting in Camera Access Point Mode
- Setting the IP Address
- Configuring Settings for the Communication Function
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating the Camera Using Browser Remote
- Linked Shooting
- Synchronizing the Camera Time
- Terminating the Connection and Reconnecting
- Checking and Configuring Network Settings
- Troubleshooting
- Reference
- Trademarks
- Quick Start Guide
- Warranty
3.
Enter the FTP server's IP address.
When Using the Virtual Keyboard
Enter the IP address with the virtual keyboard ( ). If DNS is used,
enter the domain name.
To set the entered values and return to the screen in step 2, press the
< > button.
When Using the Number Entry Screen
Use < > to select the input position in the upper area and use
< > to select a number. Press < > to enter the selected number.
To set the entered values and return to the screen in step 2, press the
<
> button.
4.
Set the port number.
[Port number setting] is usually 00021 (FTP/FTPS) or 00022 (SFTP).
Select [OK] to proceed to the next screen.
If you selected [FTP] or [FTPS] in step 1, go to step 6. If you selected
[SFTP], go to step 5.
56