Owner's Manual
Table Of Contents
- Advanced User Guide
- Contents
- Introduction
- Basic Network Settings
- Preparation
- Displaying the Connection Wizard
- Checking the Type of Access Point
- Connecting via WPS (PBC Mode)
- Connecting via WPS (PIN Mode)
- Connecting to a Detected Network Manually
- Connecting to a Network Manually
- Connecting Using an Infrastructure
- Connecting in Camera Access Point Mode
- Setting the IP Address
- Configuring Settings for the Communication Function
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating the Camera Using Browser Remote
- Linked Shooting
- Synchronizing the Camera Time
- Terminating the Connection and Reconnecting
- Checking and Configuring Network Settings
- Troubleshooting
- Reference
- Trademarks
- Quick Start Guide
- Warranty
8.
Set the login method.
This is not displayed if you selected [SFTP] in step 1.
Select [OK] to proceed to the next screen.
9.
Set the target folder.
Select [Root folder] to have images saved in the root folder as
specified in the FTP server settings ( ).
Select [Select folder] to specify a target folder in the root folder. If no
folder exists, a folder will be created automatically.
Select [OK] to proceed to the next screen.
The < > lamp on the camera will light in green.
When the following screen is displayed, select [OK] to trust the
destination server.
58