Owner's Manual
Table Of Contents
- Advanced User Guide
- Contents
- Introduction
- Basic Network Settings
- Preparation
- Displaying the Connection Wizard
- Checking the Type of Access Point
- Connecting via WPS (PBC Mode)
- Connecting via WPS (PIN Mode)
- Connecting to a Detected Network Manually
- Connecting to a Network Manually
- Connecting Using an Infrastructure
- Connecting in Camera Access Point Mode
- Setting the IP Address
- Configuring Settings for the Communication Function
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating the Camera Using Browser Remote
- Linked Shooting
- Synchronizing the Camera Time
- Terminating the Connection and Reconnecting
- Checking and Configuring Network Settings
- Troubleshooting
- Reference
- Trademarks
- Quick Start Guide
- Warranty
Transferring the Current Image
Simply play back images and press < > to transfer them. You can also continue still photo
shooting even while images are being transferred.
1.
Display the [FTP transfer settings] screen.
Perform the actions in steps 1 to 3 of Automatic Image Transfer After
Each Shot.
2.
Select [Transfer with SET].
3.
Select [Enable].
4.
Select an image.
Press the < > button on the camera.
Select the image to transfer, then press < > to transfer the image.
A voice memo can be added to the played back image before it is
transferred. For details, refer to the EOS-1D X Mark III Instruction
Manual.
Movies cannot be transferred this way. Selecting a movie and pressing
<
> will display the movie playback panel.
66