Owner's Manual
Table Of Contents
- Advanced User Guide
- Contents
- Introduction
- Basic Network Settings
- Preparation
- Displaying the Connection Wizard
- Checking the Type of Access Point
- Connecting via WPS (PBC Mode)
- Connecting via WPS (PIN Mode)
- Connecting to a Detected Network Manually
- Connecting to a Network Manually
- Connecting Using an Infrastructure
- Connecting in Camera Access Point Mode
- Setting the IP Address
- Configuring Settings for the Communication Function
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating the Camera Using Browser Remote
- Linked Shooting
- Synchronizing the Camera Time
- Terminating the Connection and Reconnecting
- Checking and Configuring Network Settings
- Troubleshooting
- Reference
- Trademarks
- Quick Start Guide
- Warranty
Batch Transfer
After shooting, you can select multiple images as desired and transfer them all at once. You
can also transfer unsent images or images that could not be sent previously.
You can also continue still photo shooting even while images are being transferred.
Caution
If you set the camera's Live View shooting/Movie shooting switch to < > when
transferring an image, the image transfer will be interrupted. If you set it to < >,
the image transfer will resume.
Selecting the Images to Transfer
Selecting Multiple Images
Transferring RAW+JPEG/RAW+HEIF Images
Selecting the Images to Transfer
1.
Select [ : Image transfer].
2.
Select [Image sel./transfer].
69