Owner's Manual
Table Of Contents
- Advanced User Guide
- Contents
- Introduction
- Basic Network Settings
- Preparation
- Displaying the Connection Wizard
- Checking the Type of Access Point
- Connecting via WPS (PBC Mode)
- Connecting via WPS (PIN Mode)
- Connecting to a Detected Network Manually
- Connecting to a Network Manually
- Connecting Using an Infrastructure
- Connecting in Camera Access Point Mode
- Setting the IP Address
- Configuring Settings for the Communication Function
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating the Camera Using Browser Remote
- Linked Shooting
- Synchronizing the Camera Time
- Terminating the Connection and Reconnecting
- Checking and Configuring Network Settings
- Troubleshooting
- Reference
- Trademarks
- Quick Start Guide
- Warranty
3.
Select [FTP transfer].
4.
Select [Sel.Image].
5.
Select the images to transfer.
Select the images to transfer by using < >, then press < >.
Display [ ] on the screen's upper left by using < >, then press
< >.
If you press the < > button and turn < >counterclockwise, you
can select an image from a three-image display. To return to the single-
image display, turn
<
> clockwise.
To select other images to transfer, repeat step 5.
After selecting the images, press < >.
70