Owner's Manual
Table Of Contents
- Advanced User Guide
- Contents
- Introduction
- Basic Network Settings
- Preparation
- Displaying the Connection Wizard
- Checking the Type of Access Point
- Connecting via WPS (PBC Mode)
- Connecting via WPS (PIN Mode)
- Connecting to a Detected Network Manually
- Connecting to a Network Manually
- Connecting Using an Infrastructure
- Connecting in Camera Access Point Mode
- Setting the IP Address
- Configuring Settings for the Communication Function
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating the Camera Using Browser Remote
- Linked Shooting
- Synchronizing the Camera Time
- Terminating the Connection and Reconnecting
- Checking and Configuring Network Settings
- Troubleshooting
- Reference
- Trademarks
- Quick Start Guide
- Warranty
In a folder
Select [Sel. ].
Select the method of selection you want to use.
• Selecting [Select transfer failed images] selects all images in the selected folder
for which transfer failed.
• Selecting [Select images not transferred] selects all unsent images in the selected
folder.
• When [Sel transfer fail img ( only)] is selected, protected images in the selected
folder whose transfer has failed are selected.
• When [Sel img not transfer. ( only)] is selected, protected images in the
selected folder that have not yet been transferred are selected.
• Selecting [Clear transfer history] clears the transfer history of images in the
selected folder.
• After clearing the transfer history, you can select [Select images not transferred]
and transfer all images in the folder again.
• When [Sel img not transfer. (
only)] is selected after the transfer history has
been cleared, all the protected images in the folder are transferred again.
Select the folder.
73