Owner's Manual
Table Of Contents
- Advanced User Guide
- Contents
- Introduction
- Basic Network Settings
- Preparation
- Displaying the Connection Wizard
- Checking the Type of Access Point
- Connecting via WPS (PBC Mode)
- Connecting via WPS (PIN Mode)
- Connecting to a Detected Network Manually
- Connecting to a Network Manually
- Connecting Using an Infrastructure
- Connecting in Camera Access Point Mode
- Setting the IP Address
- Configuring Settings for the Communication Function
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating the Camera Using Browser Remote
- Linked Shooting
- Synchronizing the Camera Time
- Terminating the Connection and Reconnecting
- Checking and Configuring Network Settings
- Troubleshooting
- Reference
- Trademarks
- Quick Start Guide
- Warranty
RAW+JPEG transfer
• Select [RAW+JPEG transfer], then select [JPEG only], [RAW
only], or [RAW+JPEG].
RAW+HEIF transfer
• Select [RAW+HEIF transfer], then select [HEIF only], [RAW only],
or [RAW+HEIF].
Caution
During image transfer, certain menu options cannot be used.
Note
This setting switches in tandem with the [Transfer type/size] screen's [RAW
+JPEG transfer] and [RAW+HEIF transfer] settings ( ).
98