User Manual

◾ Timeout setting
Specifies the timeout length.
◦ Bonjour settings
Setting items when you use Bonjour.
◾ Enable/disable Bonjour
Selecting Enable allows you to use Bonjour to perform the network settings.
◾ Service name
Specifies the Bonjour service name. You can use up to 48 characters for the name.
Note
• You cannot use the same service name as that already used for other LAN connected
devices.
◦ IEEE802.1X settings
Performs various settings for IEEE802.1X.
◦ SNTP settings
Performs various settings for SNTP (Simple Network Time Protocol).
◦ Spanning tree setting
Enables/Disables spanning tree. Selecting Active avoids circulating data on a network.
◦ LPR protocol setting
Enables/Disables the LPR setting.
◦ RAW protocol
Enables/Disables RAW printing.
◦ LLMNR
Specifies ON/OFF of LLMNR (Link-Local Multicast Name Resolution). Selecting ON allows the
printer to detect printer's IP address from the printer name without a DNS server.
◦ Gigabit Ethernet settings
Specifies the communication speed and communication method when using Gigabit Ethernet.
◦ Use Dedicated Port
Selects whether to use a dedicated port for a command sent from a Canon application to the printer.
Selecting ON allows you to use the dedicated port.
◦ IPP settings
Selecting Enable allows you to print via the network with the IPP protocol.
◦ Wi-Fi DRX setting
Selecting Enable allows you to activate discontinuous reception when using Wi-Fi.
◦ Wired LAN DRX setting
Selecting Enable allows you to activate discontinuous reception when the printer is connected to a
device compatible with wired LAN.
193