User's Manual

Click the Clear Coating tab, select the Clear Coating item that matches your purpose (see below for
the selections), and then click OK.
Auto
The printer automatically sets the areas to be clear-coated and whether clear coating is to be
executed.
It may be possible to reduce the ink consumption of the Chroma Optimizer (CO) ink or to accelerate
the print speed.
Overall
The printer clear-coats the entire print area.
If selecting Auto produced unsatisfactory clear coating effects, selecting Overall may improve the
results.
None
Printing will proceed without clear coating.
Compared to if clear coating is applied, the image quality may deteriorate, or the printed surface
may be damaged.
Important
•
The selection of Overall or None may be disabled depending on the media type and the print
quality.
For paper for which Overall or None can be used, select the paper you want to use from "Paper
Information List" and check the information.
•
If Overall or None is selected and the media type is changed to one that cannot use Overall or
None, the clear coating setting is changed to Auto.
•
If you selected None in Clear Coating, Chroma Optimizer (CO) ink will not be used during
printing, but it will be used during print head maintenance.
5. Complete the setup
590