Owner's Manual

Table Of Contents
AF-Assist Beam Firing
You can specify to use the AF-assist beam of the built-in flash or a Speedlite in viewfinder
shooting.
1.
Select [ : AF-assist beam firing].
2.
Select an option.
[ ] Enable
Enables firing of the AF-assist beam, when needed.
Raise the built-in flash if you will use it to fire the AF-assist beam.
[ ] Disable
Disables firing of the AF-assist beam. Set if you prefer not to fire the AF-assist beam.
[ ] Enable external flash only
Enables firing of the AF-assist beam when needed, only when external Speedlites are
used.
[ ] IR AF assist beam only
Enables infrared AF-assist beam firing by external Speedlites equipped with this feature,
when these flash units are attached.
325