Owner's Manual

Table Of Contents
During Live View shooting, a white or red icon is displayed.
It indicates that the camera's internal temperature is high. Image quality of still photos
may be worse when a white [ ] icon is displayed. If the red [ ] icon is displayed, it
indicates that the Live View shooting will soon stop automatically ( ).
Expanded ISO speeds cannot be selected for still photo shooting.
Check the [ISO speed] setting under [ : ISO speed settings].
Expanded ISO speeds are not available when [ : Highlight tone priority] is set to
[Enable] or [Enhanced].
During movie recording, the red icon is displayed.
It indicates that the camera's internal temperature is high. If the red [ ] icon is
displayed, it indicates that the movie recording will soon stop automatically ( ).
Movie recording stops by itself.
If the card's writing speed is slow, movie recording may stop automatically. For cards
that can record movies, see Card performance requirements. To find out the card's
writing speed, refer to the card manufacturer's website, etc.
If you record a movie for 29 min. 59 sec., the movie recording will stop automatically.
The ISO speed cannot be set for movie recording.
In shooting modes other than < >, the ISO speed is set automatically. In < >
mode, you can manually set the ISO speed ( ).
The manually set ISO speed changes when switching to movie
recording.
[ISO speed] in [ : ISO speed settings] ( ) applies to viewfinder shooting and
Live View shooting, and [ISO speed] in [ : ISO speed settings] ( ) applies to
movie recording.
718