User Manual

Caution
If the “30"” shutter speed blinks, it indicates underexposure.
Turn the <
> dial to decrease the aperture value (open the aperture) until the
shutter speed blinking stops or set a higher ISO speed.
If the “4000” shutter speed blinks, it indicates overexposure.
Turn the < > dial to increase aperture value (close the aperture) until the
shutter speed blinking stops or set a lower ISO speed.
Note
Aperture value display
The higher the f/number, the smaller the aperture opening will be. The f/number
displayed varies depending on the lens. If no lens is attached to the camera, “
00”
will be displayed for the aperture.
150