Advanced User Guide E CT2-D027-B © CANON INC.
Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Instruction Manuals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Quick Start Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 About This Guide. . . . . . . . . . . . . . . . . . . .
Landscape Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 Close-up Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 Sports Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 Kids Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 Food Mode. . . . . . . . . . . . . . . . . . . . . . . .
Wireless Flash Photography Using Optical Transmission. . . . . . . . . . . . . . . 230 Easy Wireless Flash. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233 Custom Wireless Flash. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239 Shooting and Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253 Still Photo Shooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Movie Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335 HDR Movies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 345 Creative Filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 347 Movie Recording Size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 352 Digital Zoom. . . . . . . . . . . . . . . . . . . . . . . .
Creating Albums. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 467 Cropping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 471 Resizing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 474 Rating Images. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 476 Slide Show. . . . . . . . . . . . . . . . . . . .
Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 625 Checking Network Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 626 Wireless Communication Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 627 Set-up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 629 Tab Menus: Set-up. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tab Menus: My Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 699 Registering My Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 700 Reference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 706 Importing Images to a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 707 Household Power Outlet Accessory. . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction Before starting to shoot, be sure to read the following To avoid shooting problems and accidents, first read the Safety Instructions and Handling Precautions. Also read this Advanced User Guide carefully to ensure that you use the camera correctly. Take some test shots, and understand about product liability After shooting, play images back and check whether they have been properly recorded.
Package Contents Before use, make sure the following items are included in the package. If anything is missing, contact your dealer. Camera (with eyecup and body cap) Battery Pack LP-E17 (with protective cover) Battery Charger LC-E17/LC-E17E* Strap * Battery Charger LC-E17 or LC-E17E is provided. (The LC-E17E comes with a power cord.) The camera does not come with a memory card ( ), interface cable, or HDMI cable. If you purchased a Lens Kit, check that the lenses are included.
Instruction Manuals The Instruction Manual included with the camera provides basic instructions for the camera and Wi-Fi functions. Advanced User Guide Complete instructions are provided in this Advanced User Guide. For the latest Advanced User Guide, refer to the following website. https://cam.start.canon/C002/ Lens/Software Instruction Manual Download from the following website. https://cam.start.canon/ Note Select [ : Manual/software URL] to display the QR code on the camera screen.
Quick Start Guide 1. Insert the battery ( ). Upon purchase, charge the battery to start using ( 2. Insert the card ( ). ). With the card's label facing toward the back of the camera, insert it into the card slot.
3. Attach the lens ( ). White index Red index Align the mount indexes on the lens and camera (red or white) to attach the lens. 4. Set the lens's focus mode switch to < 13 >( ).
5. Set the power switch to < < >( , >, then set the Mode dial to ). All the necessary camera settings will be set automatically. 6. Flip out the screen ( ). When the [Date/Time/Zone] setting screen is displayed, see page Date/ Time/Zone. 7. Focus on the subject ( ). Look through the viewfinder and center the subject on the screen. Press the shutter button halfway, and the camera will focus on the subject. If < > blinks in the viewfinder, manually raise the built-in flash.
8. Take the picture ( ). Press the shutter button completely to take the picture. 9. Review the picture. The image just captured will be displayed for approx. 2 sec. on the screen ( ). To display the image again, press the < > button ( ). To shoot while looking at the screen, see Viewing the Screen as You Shoot (Live View Shooting).
About This Guide Icons in This Guide Basic Assumptions for Operational Instructions and Sample Photos Icons in This Guide Indicates the Main dial. > < < Indicates the Quick control dial. > < >< > < >< > Indicates the direction to press the Quick control dial. < > Indicates the Set button. < > Indicates the Quick Control button. * Indicates the duration (in * seconds) of the operation for the button you pressed, as timed after you release the button.
Basic Assumptions for Operational Instructions and Sample Photos Before following any instructions, make sure the power switch is set to < > and the Multi-function lock feature is off ( , ). It is assumed that all the menu settings and Custom Functions are set to their defaults. Screen shots in this guide show the default menu settings for NTSC regions (North America, Japan, South Korea, Mexico, etc.) as an example. Default menu settings for Europe, Russia, China, Australia, etc. will be for PAL.
Compatible Cards The following cards can be used with the camera regardless of capacity. If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera ( ). SD/SDHC/SDXC memory cards UHS-I cards supported. Cards That Can Record Movies When recording movies, use a high-capacity card with ample performance (fast enough writing and reading speeds) for the movie recording size. For details, see Cards That Can Record Movies.
Safety Instructions Be sure to read these instructions in order to operate the product safely. Follow these instructions to prevent injury or harm to the operator of the product or others. WARNING: Denotes the risk of serious injury or death. Keep the product out of the reach of young children. A strap wrapped around a person's neck may result in strangulation. The parts or provided items of cameras or accessories are dangerous if swallowed. If swallowed, seek immediate medical assistance.
Observe the following instructions when using a battery charger. • Periodically remove any dust buildup from the power plug and power outlet using a dry cloth. • Do not plug in or unplug the product with wet hands. • Do not use the product if the power plug is not fully inserted into the power outlet. • Do not expose the power plug and terminals to dirt or let them come into contact with metallic pins or other metal objects. Do not place heavy objects on the power cord.
CAUTION: Denotes the risk of injury. Do not fire the flash near the eyes. It may hurt the eyes. Do not look at the screen or through the viewfinder for prolonged periods of time. This may induce symptoms similar to motion sickness. In such a case, stop using the product immediately and rest for a while before resuming use. Flash emits high temperatures when fired. Keep fingers, any other part of your body, and objects away from the flash unit while taking pictures.
Handling Precautions Camera care This camera is a precision instrument. Do not drop it or subject it to physical shock. The camera is not waterproof and cannot be used underwater. If the camera gets wet, contact a Canon Service Center immediately. Wipe off any water droplets with a dry and clean cloth. If the camera has been exposed to salty air, wipe it with a clean, well-wrung wet cloth. Never leave the camera near anything having a strong magnetic field such as a magnet or electric motor.
Screen Although the screen is manufactured with very high precision technology with over 99.99% effective pixels, 0.01% or fewer of the pixels may be dead, and there may also be spots of black, red, or other colors. This is not a malfunction. They do not affect the images recorded. If the screen is left on for a prolonged period, screen burn-in may occur where you see remnants of what was displayed. However, this is only temporary and will disappear when the camera is left unused for a few days.
Part Names (1) (2) (3) (4) (5) (20) (21) (19) (6) (7) (18) (22) (17) (23) (16) (8) (15) (14) (13) (24) (25) (26) (12) (11 ) (10) (9) (31) 24 (27) (28) (29)(30)
(1) Mode dial (2) Built-in flash/AF-assist beam emitter (3) Microphone (4) EF lens mount index (5) EF-S lens mount index (6) < (7) Speaker (8) Terminal cover (9) Lens release button (10) Lens lock pin (11) Lens mount (12) Contacts (13) Mirror (14) Grip (15) Red-eye reduction/Self-timer lamp > Focal plane mark (16) < (17) Shutter button (18) < (19) < > Display button (20) < > ISO speed setting button (21) < > Remote control terminal (22) < (23) < > HDMI mini O
(4) (2) (3) (5) (6) (7) (1) (1) (8) (9) (16) (15) (17) (14) (13) (12) (18) (19) (20) (23) (21) (24) (22) (10) (11 ) 26 (25) (26)
(1) Strap mount (2) Hot shoe (3) Flash sync contacts (4) Dioptric adjustment knob (5) > Live View shooting/Movie shooting button < Switches from viewfinder display to Live View display. Recording is possible when the power switch is set to < >.
Viewfinder information display (7) (1) (2) (8) (3) (9) (4) (10) (5) (11) (6) (1) Focusing screen (2) Aspect ratio line (1:1) (3) Grid (4) Spot metering circle (5) Large Zone AF frame (6) Electronic level > AF point (7) < (8) Aspect ratio line (16:9) (9) Area AF frame (10) Aspect ratio line (4:3) (11) < > Flicker detection * The display will show only the settings currently applied.
(1) (9) (2) (3) (10) (4) (11) (5) (12) (6) (13) (7) (14) (8) (15) 29
(1) Aperture value (2) AF point selection , , ( (3) Shutter speed Bulb ( ) FE lock ( ) Busy/Charging the built-in flash ( Multi-function lock warning ( ) ) No card warning ( Card full warning ( ) Card error warning ( ) ) Error codes ( AI Bounce mode active ( ) ) ) > Flash exposure compensation (4) < (5) < (6) < > AE lock AEB in progress (7) < > Warning to use flash (blinking) Flash ready (on) FE lock out of range warning (blinking) (8) < > FE lock FEB in progress < > High-speed sync (9)
Mode dial The Mode Dial includes the Basic Zone modes and Creative Zone modes. (1) Basic Zone All you do is press the shutter button. The camera sets everything to suit the subject or scene for shooting.
(2) Creative Zone These modes give you more control for shooting various subjects as desired. Program AE (P) Shutter priority AE (Tv) Aperture priority AE (Av) Manual exposure (M) Battery Charger LC-E17 Charger for Battery Pack LP-E17 ( (1) Power plug (2) Charge lamp (3) Full-charge lamp (4) Battery pack slot ).
Battery Charger LC-E17E Charger for Battery Pack LP-E17 ( (1) Power cord socket (2) Charge lamp (3) Full-charge lamp (4) Battery pack slot (5) Power cord ).
Attaching the Strap Pass the end of the strap through the camera's strap mount eyelet from the bottom. Then pass it through the strap's buckle as shown in the illustration. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle.
Software Software Overview Downloading and Installing EOS Software or Other Dedicated Software Downloading the Software Instruction Manual Software Overview This section summarizes software used with EOS cameras. Note that downloading and installing the software requires an internet connection. The software cannot be downloaded or installed in environments without an internet connection.
Downloading and Installing EOS Software or Other Dedicated Software Always install the latest version of the software. Update any previous versions that are installed by overwriting them with the latest version. Caution Do not connect the camera to a computer before you install the software. The software will not be installed correctly. The software cannot be installed unless the computer is connected to the internet. Previous versions cannot display images from this camera correctly.
1. Download the software. Connect to the internet from a computer and access the following Canon website. https://cam.start.canon/ Enter the serial number on the bottom of the camera, then download the software. Decompress it on the computer. For Windows Click the displayed installer file to start the installer. For macOS A dmg file will be created and displayed. Follow the steps below to startup the installer. 1.Double-click the dmg file. • A drive icon and installer file will appear on the desktop.
Downloading the Software Instruction Manual Software Instruction Manuals (PDF files) can be downloaded from the Canon website to your computer. Software Instruction Manual download site https://cam.start.
Preparation and Basic Operations This chapter describes preparatory steps before you start shooting and the basic camera operations.
Charging the Battery 1. Detach the protective cover provided with the battery. 2. Fully insert the battery into the charger. Do the opposite to remove the battery.
3. Recharge the battery. LC-E17 As shown by the arrow, flip out the battery charger's prongs and insert the prongs into a power outlet. LC-E17E Connect the power cord to the charger and insert the plug into a power outlet. Charging starts automatically and the charge lamp (1) lights up in orange. When the battery is fully charged, the full-charge lamp (2) will light up in green. It takes approx. 2 hr. to fully charge a completely exhausted battery at room temperature (23°C/73°F).
Upon purchase, the battery is not fully charged. Charge the battery before use. Charge the battery on the day before or on the day it is to be used. Charged batteries gradually lose their charge, even when they are not used. After charging the battery, remove it and disconnect the charger from the power outlet. When not using the camera, remove the battery.
Inserting/Removing Batteries Insertion Removal Insert a fully charged Battery Pack LP-E17 into the camera. Viewfinder brightness increases when a battery is inserted and decreases after removal. Without a battery, viewfinder display is blurry and focusing is not possible. Insertion 1. Slide the battery compartment cover lock and open the cover. 2. Insert the battery. Insert the end with the electrical contacts. Insert the battery until it locks in place.
3. Close the cover. Press the cover until it snaps shut. Caution You cannot use batteries other than the Battery Pack LP-E17.
Removal 1. Open the cover and remove the battery. Press the battery lock lever as shown by the arrow and remove the battery. To prevent short-circuits, always attach the included protective cover ( ) to the battery.
Inserting/Removing Cards Insertion Formatting the Card Removal The captured images are recorded onto the card. Insertion 1. Slide the cover to open it. 2. Insert the card. As shown by the illustration, face the card's label side toward you and insert it until it clicks in place. Caution Make sure the card's write-protect switch (1) is set upward to enable writing and erasing.
3. Close the cover. Close the cover and slide it in the direction shown by the arrows until it snaps shut. Formatting the Card If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera ( ).
Removal 1. Open the cover. Set the power switch to < >. Check that the access lamp (1) is off, then open the cover. If [Saving...] is displayed on the screen, close the cover. 2. Remove the card. Gently push in the card, then let it go to eject. Pull the card straight out, then close the cover.
Note The number of available shots varies depending on the remaining capacity of the card, the settings of image quality, ISO speed, etc. Setting [ : Release shutter without card] to [Disable] will prevent you from forgetting to insert a card ( ). Caution When the access lamp is lit or blinking, it indicates that images are being written to, read from, or erased from the card, or data is being transferred. Do not open the card slot cover during this time.
Using the Screen You can change the direction and angle of the screen. 1. Flip out the screen. 2. Rotate the screen. When the screen is out, you can tilt it up or down or rotate it to face the subject. Indicated angles are only approximate. 3. Face it toward you. Normally, use the camera with the screen facing you.
Caution Avoid forcing the screen into position as you rotate it, which puts undue pressure on the hinge. When a cable is connected to a camera terminal, the rotation angle range of the flipped-out screen will be limited. Note Keep the screen closed and facing the camera body when the camera is not in use.
Turning on the Power Setting the Date, Time, and Time Zone Changing the Interface Language Automatic Sensor Cleaning Battery Level Indicator < > The camera turns on. You can record movies ( ). < > The camera turns on. You can shoot still photos. < > The camera is turned off and does not function. Set the power switch to this position when not using the camera.
Changing the Interface Language To change the interface language, see Language. Automatic Sensor Cleaning Whenever the power switch is set to < > or < >, the sensor is cleaned automatically (which may make a faint sound). During the sensor cleaning, the screen will display [ ]. If you repeatedly turn the power switch to < > or < > within a short time period, the [ ] icon may not be displayed, but this does not indicate the camera is malfunctioning.
Battery Level Indicator When the power switch is set to < >, the battery level will be indicated. Battery level is sufficient. Battery level is low, but the camera can still be used. Battery will be exhausted soon (blinks). Charge the battery. Caution Doing any of the following will exhaust the battery faster: • Pressing the shutter button halfway for a prolonged period. • Activating the AF frequently without taking a picture. • Using the lens's Image Stabilizer.
Attaching/Detaching Lenses Attaching a Lens Detaching a Lens The camera can be used with all Canon EF and EF-S lenses. The camera cannot be used with RF or EF-M lenses. Attaching a Lens 1. Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows.
2. Attach the lens. White index Red index Align the white or red mount index on the lens with the corresponding mount index on the camera and turn the lens as shown by the arrow until it clicks into place. 3. 4. Set the lens's focus mode switch to < >. < > stands for autofocus. < > stands for manual focus. Autofocus will not operate. Remove the front lens cap.
Detaching a Lens 1. While pressing the lens release button, turn the lens as shown by the arrow. Turn the lens until it stops, then detach it. Attach the rear lens cap to the detached lens. Caution Do not look at the sun directly through any lens. Doing so may cause loss of vision. When attaching or detaching a lens, set the camera's power switch to < >. If the front part (focusing ring) of the lens rotates during autofocusing, do not touch the rotating part.
Tips for avoiding smudges and dust When changing lenses, do it quickly in a place with minimal dust. When storing the camera without a lens attached, be sure to attach the body cap to the camera. Remove dust on the body cap before attaching it.
Basic Operations Adjusting the Viewfinder Holding the Camera Shutter Button Main Dial Quick Control Dial AF Start Button LOCK Button INFO Button DISP Button Adjusting the Viewfinder Turn the dioptric adjustment knob left or right so that the AF points in the viewfinder look sharp. If the knob is difficult to turn, remove the eyecup. Note If the camera's dioptric adjustment still cannot provide a sharp viewfinder image, using E series Dioptric Adjustment Lenses (sold separately) is recommended.
Holding the Camera To obtain sharp images, hold the camera still to minimize camera shake. (1) Horizontal shooting (2) Vertical shooting 1. 2. 3. 4. 5. 6. With your right hand, hold the camera firmly by the camera grip. With your left hand, support the lens from below. Rest your right index finger lightly on the shutter button. Rest your arms and elbows lightly against the front of your body. To maintain a stable stance, place one foot slightly ahead of the other.
Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture value. The exposure value (shutter speed and aperture value) is displayed in the viewfinder for approx. 4 sec. (metering timer/ ). Pressing completely This releases the shutter and takes the picture.
Note The camera will still pause before taking a picture if you press the shutter button completely without pressing it halfway first, or if you press the shutter button halfway and immediately press it completely. Even during menu display or image playback, you can return to shooting standby by pressing the shutter button halfway.
Main Dial (1) After pressing a button, turn the < > dial. When you press a button such as < > or < >, the respective function remains ). During this time, you can turn the < > dial to adjust selectable for approx. 6 sec. ( the setting. When the timer ends or if you press the shutter button halfway, the camera will go back to shooting standby. Used for operations such as selection of the AF area, AF point, or AF operation, or the ISO speed, drive mode, or Picture Style.
(2) Turn only the < > dial. Turn the < > dial while looking at the viewfinder. Used for operations such as setting the shutter speed and aperture value.
Quick Control Dial (1) After pressing a button, turn the < > dial. When you press a button such as < > or < >, the respective function remains selectable for approx. 6 sec. ( ). During this time, you can turn the < > dial to adjust the setting. When the timer ends or if you press the shutter button halfway, the camera will go back to shooting standby. Used for operations such as selection of the AF area, AF point, or AF operation, or the ISO speed, drive mode, white balance, or Picture Style.
(2) Turn only the < > dial. Turn the < > dial while looking at the viewfinder. Use this dial to set the exposure compensation amount, the aperture value setting for manual exposures, etc. Turning the Quick control dial is one way to choose setting items, switch images, and perform other operations. Additionally, you can perform most of the operations that are possible with the < > < > < >< > keys.
AF Start Button In still photo shooting, has the same effect as pressing the shutter button halfway in Creative Zone modes ( ). In movie recording as well, enables autofocusing in Creative Zone modes.
LOCK Button With [ : Multi function lock] configured ( ), you can press the < > button to prevent unintended settings changes caused by accidentally operating the < > or < dials or touching the touch-screen panel. Note Attempting to use any locked camera controls after you have pressed the < > button will cause < > to appear in the viewfinder and [ ] on the Quick Control screen ( ). By default, the < > dial will be locked when the multi-function lock switch is in the lock position.
INFO Button Each press of the < > button changes the information shown. The following sample screens are for still photos. When the Quick Control screen is displayed, you can press the < > button and configure shooting functions directly ( ).
In Live View shooting 70
DISP Button In viewfinder shooting, you can activate and deactivate screen display by pressing the < > button.
Setting the Screen Display Level Shooting Screen Menu Display Shooting Mode Guide Feature Guide You can set how information is displayed on the screen according to your preference. Change the settings as necessary. 1. Display the main tabs. Press the < 2. Select the [ > button to display the menu screen. ] tab. Turn the < > dial or press < the [ ] tab, then press < >.
Shooting Screen You can select [Standard] or [Guided] (user-friendly) for the Quick Control screen in viewfinder shooting. By default, it is set to [Guided]. 1. Select [ 2. Select the display type. : Shooting screen].
Sample screens < >: Guided < >: Standard < >: Guided < >: Standard Note In Creative Zone modes, when [Guided] is set, only the functions particular to the set shooting mode are displayed on the Quick Control screen. Note that items that cannot be set from the Quick Control screen when [Guided] is selected can be set via the menu screen ( ).
Menu Display You can select the display type from [Standard] or [Guided]. If you set [Guided], main tab descriptions are provided when you press the < > button. If you set [Standard], you proceed directly to the menu screen when you press the < > button. By default, it is set to [Guided]. 1. Select [ 2. Select the display type. : Menu display].
Note The [ ] tab (My Menu tab) is not displayed when [Guided] is set. To set My Menu ( ), change the menu display level to [Standard].
Shooting Mode Guide A brief description of the shooting mode can be displayed when you switch shooting modes. By default, it is set to [Enable]. 1. Select [ 2. Select [Enable]. 3. Turn the Mode dial. : Mode guide]. A description of the selected shooting mode will appear.
4. Press < >. The rest of the description will appear. To clear the mode guide, press < In < > or < displayed. >.
Feature Guide A brief description of functions and items can be displayed when you use Quick Control or menu settings. By default, it is set to [Enable]. 1. Select [ 2. Select [Enable]. : Feature guide].
Sample screens Quick Control screen Menu screen (1) Feature guide Note To clear a description, either tap it or continue performing operations.
Shooting tips : Shooting screen] set to [Guided] ( ), shooting tips are displayed if the camera With [ anticipates any of the following situations under the current camera settings. In Basic Zone modes, shooting tips appear regardless of the [ : Shooting screen] setting. You want to blur the background further (when you have set the lowest aperture value in < > mode). The image is likely to be overexposed. The image is likely to be underexposed. Camera shake is likely to occur (only in Basic Zone modes).
3. Tap [ ]. Shooting tips will disappear, and the screen in step 1 will reappear. You can also hide the shooting tips by pressing < Caution Shooting tips are not displayed when touch operations are disabled. 82 >.
Menu Operations and Settings Menu Screen Menu Setting Procedure Dimmed Menu Items (1) < (2) < > button (3) Screen > button (4) < > button (5) < > button (6) < > Quick control dial (7) < > Main dial 83
Menu Screen The menu tabs and items displayed vary depending on the shooting mode.
Menu Setting Procedure When set to [ 1. : Menu display: Guided] Display the main tabs. When you press the < > button, the main tabs (1) and a description of the selected tab will appear. 2. Select a main tab. Each time you turn the < will switch. > dial, the main tab (group of functions) You can also switch between main tabs by pressing the < < > button. 3. > or Display the menu screen. Press < > to display the menu screen. To return to the main tab screen, press the < 85 > button.
4. Select a secondary tab. Turn the < 5. Select an item. Turn the < 6. > dial to select a secondary tab. > dial to select an item, then press < Select an option. Turn the < > dial to select an option. The current setting is indicated in blue. 86 >.
7. Set an option. Press < > to set it. If you change the setting from the default, it will be indicated in blue (available only for the menu items under the [ ] tab). 8. Exit the setting. Press the < > button twice to exit the menu and return to shooting standby. Note The description of menu functions hereafter assumes that the menu screen is displayed. Menu operations are also possible by tapping the menu screen or using the < < >< >< > keys. To cancel the operation, press the < > button.
When set to [ 1. : Menu display: Standard] Display the menu screen. Press the < 2. > button to display the menu screen. Select a tab. Each time you press the < switch. Turn the < > or < > button, the main tab (1) will > dial to select a secondary tab. After this, operations are the same as when set to [ : Menu display: Guided]. See When [ : Menu display: Guided] is Set, starting with step 5. To exit the setting, press the < 88 > button once.
Dimmed Menu Items Example: When [Highlight tone priority] has been set Dimmed menu items cannot be set. The menu item is dimmed if another function setting is overriding it. You can see the overriding function by selecting the dimmed menu item and pressing < >. If you cancel the overriding function's setting, the dimmed menu item will become settable. Caution You may not be able to see the overriding function for certain dimmed menu items.
Quick Control In Viewfinder Shooting In Live View Shooting/Movie Recording During Playback You can directly select and set the settings displayed on the screen. In Viewfinder Shooting 1. Press the < > button ( ).
2. Select a setting item. Press the < >< >< >< > keys for selection. Creative Zone Press < >. Some items can be set by turning the < pressing < >. > or < > dial without > or < > dial without Basic Zone Press < >. Some items can be set by turning the < pressing < >.
3. Select an option. Turn the < > or < > dial to adjust the setting. Some items are set by pressing a button after this. Press < > to return to the previous screen.
To access the corresponding setting screen from the Quick Control screen, press the < > button, then adjust the setting by turning the < > or < > dial. If you have selected [ ], press the < setting. To exit the setting, press the < 93 > button to adjust the > button.
In Live View Shooting/Movie Recording 1. Press the < 2. Select a setting item. > button ( Press the < 3. >< ). > keys for selection. Select an option. Turn the < > or < > dial to adjust the setting. Some items are set by pressing a button after this. Press the < > button to return to the previous screen.
During Playback 1. Press the < 2. Select a setting item. > button. Press the < 3. >< > keys for selection. Select an option. Turn the < > or < > dial to adjust the setting. Some items are set by pressing a button after this. Configure items labeled with a [ by pressing < >. To cancel this operation, press the < Press the < ] icon on the bottom of the screen > button. > button to return to the previous screen. Caution For image rotation, set [ : Auto rotate] to [On ] ( ).
Note Pressing the < > button during index display will switch to single-image display and show the Quick Control screen. Pressing the < > button again will return to the index display. For images from other cameras, available options may be restricted.
Touch-Screen Operation Tapping Dragging Tapping Sample screens (Quick Control) Use your finger to tap (touch briefly and then remove your finger from) the screen. For example, when you tap [ ], the Quick Control screen appears. By tapping [ you can return to the preceding screen. Note If [ : Beep] is set to [Touch ], the beep will not sound for touch operations ( ). Responsiveness to touch operations can be adjusted in [ : Touch control] ( ).
Dragging Sample screen (Menu screen) Slide your finger while touching the screen.
Viewing the Screen as You Shoot (Live View Shooting) 1. Display the Live View image. Press the < > button. Live View images are displayed nearly as bright as your shots. 2. Focus on the subject. Press the shutter button halfway to focus. If < > blinks, manually raise the built-in flash. You can also tap the screen to select the face or subject ( 99 ).
3. Take the picture. Press the shutter button completely. Press the < > button to exit Live View shooting.
Shooting with the Touch Shutter Just by tapping the screen, you can focus and take the picture automatically. 1. Enable the Touch Shutter. Tap [ ] on the screen's bottom right. Each time you tap the icon, it ] and [ ]. will toggle between [ [ ] (Touch Shutter: Enable) The camera will focus on the spot you tap on, then the picture will be taken. [ ] (Touch Shutter: Disable) You can tap on a spot to perform focusing on the spot. Press the shutter button completely to take the picture. 2.
Caution The camera shoots in single shooting mode regardless of the drive mode setting. Tapping the screen focuses with [One-Shot AF] regardless of the AF operation setting. Tapping the screen in magnified view will not focus or take the picture. Regardless of where you tap with [Fish-eye effect] set in < > mode, the camera focuses using the AF point in the center of the screen. Touch Shutter has no effect with [Miniature effect] set in < > mode.
Shooting Selfies (Self Portrait) The Self Portrait mode processes the image to suit human subjects. Before shooting, you can also specify background blurring, brightness, and skin smoothing. 1. Face the screen toward the front of the camera. 2. Tap [ ] on the screen. Tap [ 3. ] on the screen to activate [Self Portrait] mode. Set the Self Portrait settings. Tap a function (1) to select it, then set the effect.
4. Take the picture. When using the Touch Shutter: Tap [ ] (2) and set to [ ] (Touch Shutter: Enable) ( ). Tap the spot where you want to focus, then take the picture. When using the shutter button: Press the shutter button halfway to focus, then press it completely to take the picture. Caution After the camera achieves focus, do not change the distance between you and the camera until the picture is taken. Be careful not to drop the camera. Flash photography is not possible.
Basic Zone This chapter describes how to use the Basic Zone modes on the Mode dial for best results. With Basic Zone modes, all you do is point and shoot, and the camera sets everything automatically.
Fully Automatic Shooting (Scene Intelligent Auto) Recomposing the Shots Shooting Moving Subjects Scene Icons Adjusting Settings Shooting with Effects Applied (Creative Assist) < > is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automatically. It can also adjust focus automatically on either the still or moving subject by detecting the motion of the subject ( ). 1. Set the Mode dial to < 2. Press < >. >. Read the message and select [OK].
3. Aim the camera at what you will shoot (the subject). Essentially, the camera focuses on the closest subject. In viewfinder shooting, you can assist with focusing by centering the Area AF frame (1) over the subject. In Live View shooting, when a frame (AF point) appears on the screen, aim it over the subject.
4. Focus on the subject. Press the shutter button halfway to focus. If < > blinks, manually raise the built-in flash. In viewfinder shooting When achieving focus, the AF point that has achieved focus will be displayed. At the same time, the beeper will sound and the focus indicator < > in the viewfinder will light up. In low light, the AF point(s) will light up briefly in red. Under low light, the AF-assist beam (continuous flash) fires automatically as needed when the built-in flash is raised.
5. Take the picture. Press the shutter button completely to take the picture. The image just captured will be displayed for approx. 2 sec. on the screen. To retract the built-in flash, push it down with your fingers. Caution Subject movement (whether subjects are still or moving) may not be detected correctly for some subject or shooting conditions. Note The < > mode makes the colors look more impressive in nature, outdoor, and sunset scenes.
FAQ Focusing is not possible (indicated by a blinking < > in the viewfinder, in viewfinder shooting, or by an orange AF point in Live View shooting). Aim the AF point over an area with good contrast, then press the shutter button halfway ( ). If you are too close to the subject, move away and shoot again. Multiple AF points are displayed simultaneously. Focus has been achieved at all those points. Pressing the shutter button halfway does not focus on the subject.
Note Note the following if you are not using the built-in flash. Under low light where camera shake tends to occur, the viewfinder's shutter speed display will blink. Hold the camera steady or use a tripod. When using a zoom lens, you can reduce the blur caused by camera shake by setting the lens to the wideangle end. When shooting portraits under low light, tell subjects to stay still until you have finished shooting. Any movement as you shoot will make the person look blurry in the picture.
Shooting Moving Subjects Pressing the shutter button halfway tracks moving subjects to keep them in focus. Keep the subject in the Area AF frame (in viewfinder shooting) or on the screen (in Live View shooting) as you hold down the shutter button halfway, and at the decisive moment, press the shutter button completely. Scene Icons The camera detects the scene type and sets everything automatically to suit the scene.
Adjusting Settings In viewfinder shooting, you can adjust drive mode, built-in flash firing, and Creative Assist settings by pressing the < > button. In Live View shooting, you can adjust built-in flash firing, drive mode, image quality, Touch Shutter, and Creative Assist settings by tapping icons.
Shooting with Effects Applied (Creative Assist) 1. Press the < > button. In viewfinder shooting, use the < Assist]. >< > keys to select [Creative Note In viewfinder shooting, you can also press the < select [Creative Assist]. > button and In Live View shooting, read the message and select [OK].
2. Select an effect. Use the < 3. > or < > dial to select an effect, then press < Select the effect level and other details. Turn the < > or < > dial to set it, then press < To reset the setting, press the < 115 >. > button, then select [OK]. >.
Creative Assist effects [ ] Preset Select one of the preset effects. Note that [Saturation], [Color tone 1], and [Color tone 2] are not available with [B&W]. [ ] Background blur Adjust background blur. Choose higher values to make backgrounds sharper. To blur the background, choose lower values. [Auto] adjusts background blurring to match the brightness. Depending on lens brightness (f/number), some positions may not be available. [ ] Brightness Adjust image brightness. [ ] Contrast Adjust contrast.
Special Scene Mode The camera will automatically choose the appropriate settings when you select a shooting mode for your subject or scene. *< > stands for Special Scene. 1. Set the Mode dial to < 2. Press < >. >.
3. Select a shooting mode. Turn the < then press < > or < >. > dial to select the desired shooting mode, Note When [ : Mode guide] is set to [Disable], after step 1, press the < > button, use the < >< > keys to select [Choose scene], turn the < > or < > dial to select a shooting mode, then press < >.
Available Shooting Modes in Mode Shooting Mode Portrait Kids Smooth skin Food Group Photo Candlelight Landscape Night Portrait Close-up Handheld Night Scene Sports HDR Backlight Control Note Live View shooting is not available in [ ] mode.
Portrait Mode The [ ] (Portrait) mode blurs the background to make the human subject stand out. It also makes skin tones and hair look softer. Shooting tips Select the location where the distance between the subject and the background is the farthest. The further the distance between the subject and background, the more blurred the background will look. The subject will also stand out better against an uncluttered dark background. Use a telephoto lens.
Smooth Skin Mode Use [ ] (Smooth skin) mode to make skin look more attractive. Image processing makes skin look smoother. Shooting tips Enable the camera to detect faces. Frames are displayed around any main subjects detected for skin smoothing. For more effective skin smoothing, you can move closer to or farther from the subject so that the frame is displayed on the subject's face. Focus on the face.
Group Photo Mode Use the [ ] (Group Photo) mode to shoot group photos. You can take a picture in which both the people in the front and people in the back are all in focus. Shooting tips Use a wide-angle lens. When using a zoom lens, use the wide-angle end to make it easy to get all the people in the group in focus at once, from the front row to the back.
Landscape Mode Use the [ ] (Landscape) mode for expansive scenery or to have everything in focus from near to far. For vivid blues and greens, and sharp and crisp images. Shooting tips With a zoom lens, use the wide-angle end. When using a zoom lens, set the lens to the wide-angle end to make the objects near and far in focus. It also adds breadth to landscapes. Keep the camera steady when shooting night scenes. Using a tripod is recommended.
Close-up Mode When you want to shoot flowers or small things up close, use the [ ] (Close-up) mode. To make small things appear much larger, use a macro lens (sold separately). Shooting tips Use a simple background. A simple background makes small objects such as flowers stand out better. Move in as close as possible to the subject. Check the lens for its minimum focusing distance. The lens minimum focusing distance > (focal plane) mark on the top of the camera to the subject.
Sports Mode Use the [ ] (Sports) mode to shoot a moving subject, such as a running person or a moving vehicle. Shooting tips Use a telephoto lens. Use of a telephoto lens is recommended to enable shooting from a distance. Track the subject with the Area AF frame. In viewfinder shooting, aim the Area AF frame over the subject and press the shutter button halfway to start focusing. During autofocusing, the beeper will continue beeping > will blink. softly.
Kids Mode To photograph the children running around, use the [ healthy. 126 ] (Kids) mode.
Shooting tips Track the subject with the Area AF frame. In viewfinder shooting, aim the Area AF frame (1) over the subject and press the shutter button halfway to start focusing. During autofocusing, the beeper will continue beeping softly. If focus cannot be achieved, the focus indicator < > will blink. In Live View shooting, an Area AF frame (2) appears after you press the shutter button halfway. Once the subject is in focus, the AF point turns blue. Shoot continuously.
Food Mode When you want to take pictures of food, use the [ ] (Food) mode. The photo will look bright and appetizing. Also, the reddish tinge due to the light source will be suppressed in the pictures taken under tungsten lights, etc. Shooting tips Change the color tone. You can change [Color tone]. To increase the food's reddish tinge, set it toward [Warm tone] (red). Set it toward [Cool tone] (blue) if it looks too red. Caution The warm color cast of subjects may fade.
Candlelight Mode When you want to photograph a person in candlelight, use the [ ] (Candlelight) mode. The atmosphere of candlelight is reflected in the color tones of the picture. Shooting tips Use the center AF point to focus. Aim the center AF point in the viewfinder on the subject, then shoot. Prevent camera shake if the numeric display (shutter speed) in the viewfinder blinks. Under low light where camera shake tends to occur, the viewfinder's shutter speed display will blink.
Night Portrait Mode When you want to photograph people at night and obtain a natural-looking night scene in the background, use the [ ] (Night Portrait) mode. Note that shooting in this mode requires the built-in flash or a Speedlite. Using a tripod is recommended. Shooting tips Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view. Because camera shake occurs in handheld shooting, using a tripod is also recommended. Check the image brightness.
Note If you use the self-timer together with a flash, the self-timer lamp will light up briefly after the picture is taken.
Handheld Night Scene Mode The [ ] (Handheld Night Scene) mode enables you to shoot night scenes even in handheld shooting. In this shooting mode, four shots are taken consecutively for each picture, and the resulting image with reduced camera shake is recorded. Shooting tips Hold the camera steady. Keep your elbows close to your body to hold the camera steady ( ).
Caution Compared to other shooting modes, the image area will be smaller. RAW image quality cannot be set. When you shoot a night scene with Live View shooting, achieving focus with AF may be difficult if point sources of light are found in the AF point. In this case, set the lens's focus mode switch to < > and focus manually. The Live View image displayed will not look exactly the same as the actual captured image. If you use a flash and the subject is close, overexposure may result.
HDR Backlight Control Mode When shooting a scene having both the bright and dark areas, use the [ ] ( HDR Backlight Control) mode. When you take one picture in this mode, three consecutive shots are taken at different exposures. This results in one image, with a wide tonal range, that has minimized the clipped shadows caused by backlighting. * HDR stands for High Dynamic Range. Shooting tips Hold the camera steady. Keep your elbows close to your body to hold the camera steady ( ).
Creative Filters Mode Creative Filter Characteristics Adjusting the Miniature Effect You can shoot with filter effects applied. In Live View shooting, you can preview filter effects before shooting. 1. Set the Mode dial to < 2. Display the Live View image. Press the < >. > button to display the Live View image.
3. Select [Creative filters] with Quick Control. Press the < > button ( Use the < > < press < >. 4. ). > keys to select the icon in the upper left, then Select a filter effect. Turn the < >. < > or < > dial to select a filter effect ( ), then press The image is shown with the filter effect applied. Note If you do not want the Live View image to be displayed when > button after step 1 and select setting functions, press the < [Choose filter].
5. Adjust the effect and shoot. Press the < (except , > button and select an icon below [Creative filters] , , , or ). Turn the < > or < > dial to adjust the effect, then press < >. Caution RAW and RAW+JPEG are not available. When RAW image quality is set, images are captured with image quality. When RAW+JPEG image quality is set, images are captured with the specified JPEG image quality. Continuous shooting is not available when [ ], [ ], [ ], [ ], [ ], or [ ] is set.
Creative Filter Characteristics Grainy B/W Makes the image grainy and black and white. By adjusting the contrast, you can change the black-and-white effect. Soft focus Gives the image a soft look. By adjusting the blur, you can change the degree of softness. Fish-eye effect Gives the effect of a fish-eye lens. The image will have barrel distortion. Depending on the level of this filter effect, the area trimmed along the periphery of the image changes.
HDR art embossed The color saturation, brightness, contrast and gradation are decreased to make the picture look flat, so that the picture looks faded and old. The subject outlines will have bright (or dark) edges. Caution [ ], [ ], [ ], and [ ] precautions Compared to other shooting modes, the image area will be smaller. Live View previews of the filter effects will not look exactly the same as your shots.
Adjusting the Miniature Effect 1. Move the AF point. Move the AF point to the position to focus on. 2. Move the scene frame and shoot. Move the scene frame if the AF point is outside of it, so that the AF point is aligned with it. To make the scene frame movable (displayed in orange), press the < > button or tap [ ] in the lower right of the screen. By tapping [ ], you can also switch between vertical and horizontal scene frame orientation.
Creative Zone Creative Zone modes give you the freedom to shoot in a variety of ways by setting your preferred shutter speed, aperture value, exposure, and more. To clear the shooting mode description displayed when you turn the Mode dial, press < > ( ). Note Make sure the Multi-function lock feature is off ( • Program AE Mode (P) • Shutter-Priority AE Mode (Tv) • Aperture-Priority AE Mode (Av) • Manual Exposure Mode (M) • Long (Bulb) Exposures • Mirror Lockup 141 ).
Program AE Mode (P) The camera automatically sets the shutter speed and aperture value to suit the subject's brightness. * < > stands for Program. * AE stands for Auto Exposure. 1. Set the Mode dial to < 2. Focus on the subject. >. As you look through the viewfinder, aim the AF point over the subject, then press the shutter button halfway. After the camera focuses, the focus indicator < the viewfinder lights up (in One-Shot AF mode).
3. Check the display. Standard exposure is available unless the shutter speed and aperture value are blinking. 4. Take the picture. Compose the shot and press the shutter button completely. Caution If the “30"” shutter speed and the lowest f/number blink, it indicates underexposure. Increase the ISO speed or use flash. If the “4000” shutter speed and the highest f/number blink, it indicates overexposure.
Note Differences between < > and < > modes In < > mode, many functions, such as the AF method and metering mode, are set automatically to prevent spoiled shots. The functions you can set are limited. On the other hand, with < > mode, only the shutter speed and aperture value are set automatically. You can freely set the AF method, metering mode, and other functions.
Shutter-Priority AE Mode (Tv) In this mode, you set the shutter speed and the camera automatically sets the aperture value to obtain the standard exposure matching the brightness of the subject. A faster shutter speed can freeze the action of a moving subject. A slower shutter speed can create a blurred effect, giving the impression of motion. *< > stands for Time value. Blurred motion (Slow shutter speed: 1/30 sec.) Frozen motion (Fast shutter speed: 1/2000 sec.) 1. Set the Mode dial to < >.
2. Set the desired shutter speed. Set with the < 3. > dial. Focus on the subject. Press the shutter button halfway. 4. Check the display and shoot. As long as the aperture value is not blinking, the standard exposure will be obtained. Caution If the lowest aperture value blinks, it indicates underexposure. Turn the < > dial to set a slower shutter speed until the aperture value stops blinking or set a higher ISO speed. If the highest aperture value blinks, it indicates overexposure.
Note Shutter speed display Shutter speeds are indicated on the screen as a fraction but abbreviated in the viewfinder, where only the denominator is indicated. For example, “125” in the viewfinder stands for 1/125 sec. Additionally, “0"5” indicates 0.5 sec. and “15"”, 15 sec.
Aperture-Priority AE Mode (Av) In this mode, you set the desired aperture value and the camera sets the shutter speed automatically to obtain the standard exposure matching the subject brightness. A higher f/number (smaller aperture hole) will make more of the foreground and background fall within acceptable focus. On the other hand, a lower f/number (larger aperture hole) will make less of the foreground and background fall within acceptable focus. *< > stands for Aperture value (aperture opening).
1. Set the Mode dial to < 2. Set the desired aperture value. Set with the < 3. >. > dial. Focus on the subject. Press the shutter button halfway. 4. Check the display and shoot. As long as the shutter speed is not blinking, the standard exposure will be obtained.
Caution If the “30"” shutter speed blinks, it indicates underexposure. Turn the < > dial to decrease the aperture value (open the aperture) until the shutter speed blinking stops or set a higher ISO speed. If the “4000” shutter speed blinks, it indicates overexposure. Turn the < > dial to increase aperture value (close the aperture) until the shutter speed blinking stops or set a lower ISO speed. Note Aperture value display The higher the f/number, the smaller the aperture opening will be.
Depth-of-Field Preview Press the depth-of-field preview button to stop down the lens to the current aperture value and check the area in focus (depth of field). Note The larger the aperture value, the wider the area (from the foreground to the background) in focus, but the darker the viewfinder display. The depth-of-field effect is readily apparent on the Live View image as you change the aperture value and press the depth-of-field preview button ( ).
Manual Exposure Mode (M) In this mode, you set both the shutter speed and aperture value as desired. To determine the exposure, refer to the exposure level indicator in the viewfinder or use a commercially available exposure meter. *< > stands for Manual. 1. Set the Mode dial to < 2. Set the ISO speed. >. With ISO Auto, you can set exposure compensation ( 152 ).
3. Set the shutter speed and aperture value. To set the shutter speed (1), turn the < aperture value (2), turn the < > dial.
4. Focus on the subject. Press the shutter button halfway. (1) Standard exposure index (2) Exposure level mark The exposure setting will be displayed in the viewfinder. Check the exposure level mark < > to see how far the current exposure level is from the standard exposure level. 5. Set the exposure and take the picture. Check the exposure level indicator and set the desired shutter speed and aperture value.
Exposure Compensation with ISO Auto If the ISO speed is set to “ ” (AUTO) for manual exposure shooting, you can set exposure compensation ( ) as follows: [ : Expo.comp./AEB] By holding down < > and turning the < > dial when [ Controls] setting of [ : Custom Functions(C.Fn)] is set to [ btn, turn )].
Long (Bulb) Exposures In this mode, the shutter stays open as long as you hold down the shutter button completely, and closes when you let go of the shutter button. Use bulb exposures for night scenes, fireworks, astrophotography, and other subjects requiring long exposures. 1. Set the Mode dial to < 2. Set the shutter speed to [BULB]. Turn the < 3. >. > dial to the left to set [BULB]. Take the picture. The exposure will continue for as long as you keep the shutter button pressed completely.
Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera's internal components. Long bulb exposures produce more noise in the image than usual. If ISO Auto is set, ISO 400 will be set ( ). When shooting bulb exposures with both the self-timer and mirror lockup, keep pressing the shutter button completely until shooting is finished (when the self-timer and bulb exposure time have elapsed).
Mirror Lockup You can use the mirror lockup function to prevent the disturbing mechanical vibrations (mirror shock) when shooting with super telephoto lenses or shooting close-ups (macro photography). 1. Configure the mirror lockup setting. Set [10: Mirror lockup] in [ : Custom Functions(C.Fn)] to [1:Enable] ( ). 2. Focus on the subject, then press the shutter button completely. The mirror will swing up. 3. Press the shutter button completely again.
Shooting tips Also set the self-timer to [ ] or [ ]. When you press the shutter button completely, the mirror locks up. The picture will be then taken 10 sec. or 2 sec. later. Shoot remotely. Since you do not touch the camera when the picture is taken, remote control shooting together with mirror lockup can further reduce the camera vibration blur ( ). With Wireless Remote Control BR-E1 (sold separately) set to the 2 sec.
AF, Drive, and Exposure Settings This chapter describes how to configure AF, drive mode, metering mode, and related settings. Caution < > stands for autofocus. < > stands for manual focus.
AF Operation One-Shot AF for Still Subjects AI Servo AF (Viewfinder Shooting) or Servo AF (Live View Shooting) for Moving Subjects AI Focus AF (Viewfinder Shooting) for Automatic Switching of AF Operation AF-Assist Beam AF Points Lighting Up in Red (Viewfinder Shooting) You can select the AF operation characteristics to suit the shooting conditions or subject. In Basic Zone modes, the optimum AF operation is set automatically for the respective shooting mode. 1. Set the lens's focus mode switch to < 2.
4. Select the AF operation. Press the < >< > keys. : One-Shot AF : AI Focus AF : AI Servo AF In Live View shooting, press the < operation]. : One-Shot AF : Servo AF Note AF is also possible by pressing the < > button.
One-Shot AF for Still Subjects This AF operation is suited for still subjects. When you press the shutter button halfway, the camera will focus only once. Viewfinder shooting • Once a subject is in focus, the focusing AF point (1) is displayed, the focus indicator < > (2) in the viewfinder lights up, and the camera beeps. The focus indicator > blinks if the camera cannot focus. < • With evaluative metering ( focus.
AI Servo AF (Viewfinder Shooting) or Servo AF (Live View Shooting) for Moving Subjects This AF operation is suited for moving subjects. While you hold down the shutter button halfway, the camera will keep focusing on the subject continuously. AI Servo AF (viewfinder shooting) • Once a subject is in focus, the focusing AF point is displayed. The focus indicator < > in the viewfinder does not light up when subjects are in focus.
AI Focus AF (Viewfinder Shooting) for Automatic Switching of AF Operation AF operation automatically switches from [One-Shot AF] to [AI Servo AF] based on subject status. After the camera uses [One-Shot AF] to focus on a subject, if it detects subject movement, a change in distance, or similar changes, it switches to [AI Servo AF] and continues to track the moving subject. Note The camera continues beeping quietly when subjects are in focus using the servo.
AF-Assist Beam In viewfinder shooting, the built-in flash or a Speedlite can emit an AF-assist beam to make autofocusing easier under low light or in other conditions where autofocusing is difficult. With the built-in flash, the AF-assist beam fires as needed after you raise the flash and press the shutter button halfway. With a Speedlite, configure the setting on the Speedlite as needed. Caution The flash does not emit an AF-assist beam when AF operation is set to [AI Servo AF].
AF Points Lighting Up in Red (Viewfinder Shooting) The AF points light up in red when focus is achieved in low-light conditions or on a dark subject. You can disable lighting up in Creative Zone modes ( ).
Selecting the AF Area and AF Point (Viewfinder Shooting) AF Area Selection Mode Selecting the AF Area Selection Mode Selecting the AF Point or Zone Manually Meaning of Lit or Blinking AF Points Shooting Conditions That Make Focusing Difficult The number of available AF points, the focusing patterns, and the Area AF frame shape vary by lens. For details, refer to Compatible Lenses and Autofocusing (Viewfinder Shooting). AF Area Selection Mode Four AF area selection modes are available.
Manual select.:Zone AF The camera focuses in a zone consisting of nine AF points. Subjects are easier to acquire than with 1-point AF. Generally focuses on the nearest subject. Note that any detected faces are given priority in focusing. With [AI Servo AF], focusing continues as long as subjects can be tracked within the zone. Manual select.:Large Zone AF The AF area is divided into three focusing zones (left, center, and right) for focusing. Subjects are easier to acquire than with Zone AF.
Auto selection AF The Area AF frame (entire AF area) is used to focus. With [One-Shot AF], generally focuses on the nearest subject. Note that any detected faces are given priority in focusing. With [AI Servo AF], focusing continues as long as the Area AF frame can track the subject. Caution AF points may not track subjects under some shooting conditions when [AI Servo AF] is used with [Manual select.:Zone AF], [Manual select.:Large Zone AF], or [Auto selection AF].
Selecting the AF Area Selection Mode 1. Press the < > or < 2. Press the < > button. > button ( Each time you press the < changes. ). > button, the AF area selection mode Note The AF area selection mode can be selected in Creative Zone modes by pressing the < > or < > button, then turning the < > dial when [7: AF area selection method] in [ : Custom Functions(C.Fn)] is set to [1: →Main Dial] ( ).
Selecting the AF Point or Zone Manually 1. Press the < > or < > button ( 172 ).
2. Select an AF point or zone. To select AF points horizontally and vertically, you can turn the < dial and < > dial, respectively. Turning the < > or < > dial switches zones (or cycles through Zone AF zones) in Zone AF and Large Zone AF modes. Note When you keep holding down the < > button and turn the < > dial, you can select an AF point vertically. The following information is displayed in the viewfinder when you press the < > or < > button. • Manual select.:Zone AF, Manual select.
Meaning of Lit or Blinking AF Points Pressing the < > or < > button lights up the AF points that are cross-type AF points for high-precision autofocusing. The blinking AF points are horizontal-line or vertical-line sensitive.
Shooting Conditions That Make Focusing Difficult Subjects with very low contrast. (Example: Blue skies, solid-color flat surfaces, etc.) Subjects in very low light. Strongly backlit or reflective subjects. (Example: Cars with highly reflective surfaces, etc.) Near and distant subjects positioned close to an AF point. (Example: Animals in cages, etc.) Light source such as dots of light positioned close to an AF point. (Example: Night scenes, etc.) Subjects with repetitive patterns.
Selecting the AF Methods (Live View Shooting) AF Method Selecting the AF Method Magnified View AF Shooting Tips Shooting Conditions That Make Focusing Difficult AF Range AF Method : +Tracking The camera detects and focuses on people's faces. An AF point [ detected, which is then tracked. If no face is detected, the entire AF area is used for focusing. : Spot AF The camera focuses in a narrower area than [1-point AF].
: 1-point AF The camera focuses using a single AF point [ ]. : Zone AF Focuses in a wide Zone AF frame, which makes it easier to acquire subjects than with [1point AF]. Prioritizes focusing on the nearest subject. Faces of any people in the Zone AF frame are also given priority in focusing. AF points in focus are displayed with < >.
Selecting the AF Method 1. Press the < 2. Select the AF method. > button. Each time you press the < > button, the AF method changes. You can also make your selection from [ : AF method]. Note In < > mode, [ +Tracking] is set automatically. Regarding the Touch Shutter (AF and shutter release by touch operation), see Shooting with the Touch Shutter.
+Tracking: The camera detects and focuses on people's faces. If a face moves, the AF point [ ] also moves to track the face. You can set [Eye Detection AF] to [Enable] to shoot with the subject's eyes in focus ( ). * These instructions apply to the camera with AF operation set to [One-Shot AF] ( AF] ( ) set, the AF point will turn blue when focus is achieved. 1. ). With [Servo Check the AF point. An AF point [ ] appears over any face detected. If [ ] is displayed, you can use the < face to focus on.
2. Focus and take the picture. Once you press the shutter button halfway and the subject is in focus, the AF point turns green and the camera beeps. An orange AF point indicates that the camera could not focus on subjects. Tapping a face for focus Tapping a face or subject to focus on changes the AF point to [ ] and focuses where you tap. Even if the face or subject moves on the screen, the AF point [ ] moves to track it.
Spot AF/1-point AF/Zone AF You can manually set the AF point or Zone AF frame. Here, 1-point AF screens are used as an example. 1. Check the AF point. The AF point (1) will appear. With Zone AF, the Zone AF frame is displayed. 2. Move the AF point. Use the < > < > < >< > keys to move the AF point to where you want to focus (but note that with some lenses, it may not move to the edge of the screen). You can also tap the screen to move the AF point. To center the AF point or Zone AF frame, press < >.
3. Focus and take the picture. Aim the AF point over the subject and press the shutter button halfway. When focus is achieved, the AF point will turn green and the beeper will sound. If focus is not achieved, the AF point will turn orange. Caution AF points may not track subjects under some shooting conditions when [Servo AF] is used with Zone AF. Focusing may be difficult when using a peripheral AF point. In this case, select an AF point in the center.
Eye Detection AF With the AF method set to [ +Tracking], you can shoot with the subject's eyes in focus. 1. Select [ 2. Select [Enable]. : Eye Detection AF].
3. Aim the camera at the subject. An AF point is displayed around their eye. You can tap the screen to select an eye for focus. The entire face is selected when you tap other facial features, such as their nose or mouth. Eyes to focus on are selected automatically. When [ ] is displayed, you can choose an eye or face to focus on >< > keys, depending on the [Eye Detection AF] with the < setting. 4. Take the picture.
Magnified View To check the focus when the AF method is other than [ +Tracking], magnify display by approx. 5× or 10× by pressing the < > button (or tapping ). Magnification is centered on the AF point for [Spot AF] or [1-point AF] and on the Zone AF frame for [Zone AF]. Autofocusing is performed with magnified display if you press the shutter button halfway when set to [Spot AF], and [1-point AF].
AF Shooting Tips Even when focus is achieved, pressing the shutter button halfway will focus again. Image brightness may change during autofocusing. Depending on the subject and shooting conditions, it may take longer to focus, or the continuous shooting speed may decrease. If the light source changes as you shoot, the screen may flicker, and focusing may be difficult. In this case, restart the camera and resume shooting with AF under the light source you will use.
Shooting Conditions That Make Focusing Difficult Subjects with low contrast, such as a blue sky or flat surfaces in solid colors, or other cases when highlight or shadow details are clipped. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction. Subjects with repetitive patterns (Example: Skyscraper windows, computer keyboards, etc.). Fine lines and subject outlines. Under a light source whose brightness, color, or pattern keeps changing.
Manual Focus Viewfinder Shooting Live View Shooting Setting MF Peaking (Outline Emphasis) If focus cannot be achieved with autofocus, follow the procedure below to focus manually. Viewfinder Shooting 1. Set the lens's focus mode switch to < 2. Focus on the subject. >. Turn the lens focusing ring (1) until the subject looks sharp in the viewfinder. Note The focus indicator < > is lit when subjects are in focus as you press the shutter button halfway in manual focusing.
Live View Shooting You can magnify the image when focusing. 1. Set the lens's focus mode switch to < >. Turn the lens focusing ring to focus roughly. 2. Magnify the image. Each press of the < 10× display.
3. Move the magnified area. Use the < > < > < >< into position for focusing. > keys to move the magnified area To center the magnified area, press < 4. >. Focus manually. While looking at the magnified image, turn the lens focusing ring to focus. After achieving focus, press the < view. > button to return to the normal Note In magnified view, the exposure is locked. You can use the Touch Shutter to take a picture during normal display.
Setting MF Peaking (Outline Emphasis) In Live View shooting, edges of subjects in focus can be displayed in color to make focusing easier. You can set the outline color and adjust the sensitivity (level) of edge detection (except in < > mode). 1. Select [ 2. Select [Peaking]. : MF peaking settings]. Select [On]. 3. Set the level and color. Set it as necessary.
Caution Peaking display is not shown during magnified display. During HDMI output, peaking display is not shown on equipment connected via HDMI. MF peaking may be hard to discern at high ISO speeds, especially when ISO expansion is set. If necessary, lower the ISO speed or set [Peaking] to [Off]. Note Peaking display shown on the screen is not recorded in images.
Drive Mode 1. Press the < 2. Select the drive mode. > button. [ ] Single shooting When you press the shutter button completely, only one shot will be taken. [ ] High speed continuous When you hold down the shutter button completely, you can shoot continuously at max. approx. 7.0 shots/sec. (Live View shooting: max. approx. 7.5 shots/sec.) while you keep holding it down. When the AF operation is set to [Servo AF] in Live View shooting, the continuous shooting speed will be max. approx. 4.5 shots/sec.
Caution The maximum continuous shooting speed for < > ( ) is the value in continuous shooting under these conditions: shooting with a fully charged Battery Pack LP-E17 at a 1/1000 sec. or faster shutter speed and maximum aperture value (depending on the lens), Image Stabilizer off (depending on the lens), at room temperature (23°C/73°F), with flicker reduction disabled.
Using the Self-Timer 1. Press the < 2. Select the self-timer. > button. / : Shoot in 10 sec. Remote control shooting is also possible ( ). / : Shoot in 2 sec. Remote control shooting is also possible ( ). : Shoot continuously in 10 sec. for the specified number of shots Press the < > < > keys to set the number of multiple shots (2 to 10) to be taken with the self-timer. Remote control shooting is not possible.
3. Take the picture. Focus on the subject, then press the shutter button completely. To check operation, look at the self-timer lamp, listen for beeps, or watch the countdown in seconds on the screen. The self-timer lamp blinks faster approx. 2 sec. before the shot. Caution With [ ], the shooting interval may become longer under some shooting conditions, depending on image quality, use of flash, and other factors. Light that enters the viewfinder may prevent suitable exposure.
Remote Control Shooting Wireless Remote Control BR-E1 Remote Switch RS-60E3 You can shoot remotely by using an optional Wireless Remote Control BR-E1, which pairs via Bluetooth. Wireless Remote Control BR-E1 You can shoot remotely up to approx. 5 meters/16.4 feet away from the camera. After pairing the camera and BR-E1 ( ), set the drive mode to [ ] ( ). For operation procedures, refer to the BR-E1 instruction manual.
Remote Switch RS-60E3 Once connected to the camera, the switch enables you to shoot remotely over a wired connection. For operation procedures, refer to the RS-60E3 instruction manual. 1. Open the terminal cover. 2. Connect the plug to the remote control terminal.
Metering Mode Four methods (metering modes) to measure the subject's brightness are provided. Normally, evaluative metering is recommended. In Basic Zone modes, evaluative metering is set automatically. (In the < : > and < : > modes, center-weighted average metering is set.) 1. Select [ 2. Select an item. : Metering mode]. : Evaluative metering General-purpose metering mode suited even for backlit subjects. The camera adjusts the exposure automatically to suit the scene.
: Center-weighted average The metering across the screen is averaged, with the center of the screen weighted more heavily. Caution With (Evaluative metering), holding down the shutter button halfway locks the exposure value (AE lock) after the camera focuses with [One-Shot AF]. With (Partial metering), (Spot metering), or (Center-weighted average), exposure is set at the moment the picture is taken (without locking the exposure value when the shutter button is pressed halfway).
Exposure Compensation Exposure compensation can brighten (increased exposure) or darken (decreased exposure) the standard exposure set by the camera. Exposure compensation is available in < >, < >, < >, and < > modes. For details on exposure compensation when < > mode and ISO Auto are both set, see Exposure Compensation with ISO Auto. 1. Check the exposure. Press the shutter button halfway and check the exposure level indicator. 2. Set the compensation amount.
Caution If [ : Auto Lighting Optimizer] ( ) is set to any setting other than [Disable], the image may still look bright even if a decreased exposure compensation for a darker image is set. Note Setting the power switch to < > clears any compensation amount that was set. To retain the setting even after the power switch is set to < >, set [5: Exposure comp. auto cancel] in [ : Custom Functions(C.Fn)] to [1:Disable].
Exposure Lock (AE Lock) You can lock the exposure when you want to set the focus and exposure separately or when you are to take multiple shots at the same exposure setting. Press the < > button to lock the exposure, then recompose and take the picture. It is effective for shooting backlit subjects, etc. 1. Focus on the subject. Press the shutter button halfway. 2. Press the < > button ( ). A [ ] icon is displayed in the viewfinder or on the screen, indicating that the exposure is locked (AE lock).
Caution If [ : Auto Lighting Optimizer] ( ) is set to any setting other than [Disable], the image may still look bright even if a decreased exposure compensation for a darker image is set. AE Lock Effects Metering mode ( ) AF Point Selection ( , ) Automatic Selection Manual Selection Exposure value centered on the AF point in focus is locked. Exposure value centered on the selected AF point is locked. AE lock is applied at the center AF point.
Flash Photography This chapter describes how to shoot with the built-in flash or an external flash (EL/EX series Speedlites). (< to the right of page titles indicates functions only available in Creative Zone modes >, < >, < >, or < >). Caution Flash cannot be used while you are recording movies. AEB is not available in flash photography.
Shooting With the Built-in Flash Approximate Built-in Flash Range Shutter Speed and Aperture Value in Flash Photography Shooting With FE Lock Using the built-in flash is recommended when the [ ] icon appears in the viewfinder or on the screen, when subjects in daytime shots are backlit, or when shooting under low light. 1. Manually raise the flash. In Creative Zone modes, shooting with flash is possible whenever the flash is raised.
3. Take the picture. When focus is achieved and you press the shutter button completely, the flash will fire at all times. To retract the built-in flash after shooting, push it down with your fingers until it clicks into place. Shooting tips In bright light, decrease the ISO speed. If the exposure setting in the viewfinder blinks, decrease the ISO speed. Detach the lens hood. Do not get too close to the subject.
Shutter Speed and Aperture Value in Flash Photography Shooting Mode * When [Slow synchro] under [ Shutter Speed Aperture Value Auto (1/200–30 sec.)* Automatically set Manual (1/200–30 sec.) Automatically set Auto (1/200–30 sec.)* Manually set Manual (1/200–30 sec.) Manually set : Flash control] is set to [1/200-30sec. auto]. Caution Do not use the built-in flash unless it is fully raised.
Shooting With FE Lock The background or other factors may make subjects brighter or darker in flash photography with subjects near the edge of the screen. In this case, use FE lock. After setting the flash output for the appropriate subject brightness, you can recompose (put the subject toward the side) and shoot. This feature can also be used with a Canon EL/EX series Speedlite. * FE stands for Flash Exposure. 1. Manually raise the flash.
3. Press the < > button ( ). Center the subject in the viewfinder, then press the < > button. A preflash is fired by the flash, and the flash output required for shooting is retained. In the viewfinder, “FEL” is displayed for a moment and [ ] will light up. Each time you press the < > button, a preflash is fired, and the flash output required for shooting is retained. 4. Take the picture. Compose the shot and press the shutter button completely.
Flash Function Settings Flash Firing E-TTL II Metering Red-Eye Reduction Slow Synchro Built-in Flash Settings External Flash Function Settings External Flash Custom Function Settings Clear Flash Settings/Clear All Speedlite Custom Functions Functions of the built-in flash or external EL/EX series Speedlites can be set from menu screens on the camera. Before setting functions of external Speedlites, attach the Speedlite and turn it on.
2. Select an option.
Flash Firing Set to [ ] (in Basic Zone or < shooting conditions. > modes) to have the flash fire automatically, based on Set to [ ] to have the flash always fire when you shoot. Select [ beam.
E-TTL II Metering Set to [Eval (FacePrty)] for flash metering suitable for shots of people. Continuous shooting speed for [ ] will become slower than when [Evaluative] or [Average] is selected. Set to [Evaluative] for flash metering that emphasizes firing in continuous shooting. If [Average] is set, the flash exposure will be averaged for the entire metered scene. Caution Even with the camera set to [Eval (FacePrty)], results may not be as expected, depending on the shooting conditions and subject.
Red-Eye Reduction Set to [Enable] to reduce red-eye by firing the red-eye reduction lamp before firing the flash.
Slow Synchro You can set the flash-sync speed for flash photography in < > mode or < > mode. [ ] 1/200-30sec. auto The flash sync speed is set automatically within a range of 1/200 sec. to 30 sec. to suit the scene's brightness. Slow-sync shooting is used in low-light locations (under some shooting conditions), and shutter speed is automatically lowered. [ ] 1/200-1/60sec. auto Prevents a slow shutter speed from being set automatically in low-light conditions.
Built-in Flash Settings Flash mode Set to [E-TTL II] to shoot in E-TTL II/E-TTL fully automatic flash mode. To enable [Flash mode], select [CustWireless] in [Built-in flash]. Set to [Manual flash] to specify your preferred flash output manually.
Shutter sync. Normally, set this to [1st curtain] so that the flash fires immediately after the shooting starts. Set to [2nd curtain] and use low shutter speeds for natural-looking shots of subject motion trails, such as car headlights. Caution When shooting with [2nd curtain], set a slow shutter speed of 1/80 sec. or slower. If the shutter speed exceeds 1/80 sec., first-curtain synchronization is used automatically even if [2nd curtain] is set.
exp. comp. Set the flash exposure compensation if the brightness of the subject does not come out as desired (so you want to adjust the flash output) in flash photography. You can set the flash exposure compensation up to ±2 stops in 1/3-stop increments. 1. Select [ 2. Set the compensation amount. exp. comp.]. If the exposure is too dark, press the < exposure). If the exposure is too bright, press the < exposure).
Caution If [ : Auto Lighting Optimizer] ( ) is set to any setting other than [Disable], the image may still look bright even if a decreased flash exposure compensation is set. If flash exposure compensation is set with a Speedlite (sold separately, ), you cannot set the flash exposure compensation with the camera (Quick Control or External flash func. setting). Note that the Speedlite's setting overrides the camera's if both are set at the same time.
External Flash Function Settings The information displayed, position of display, and available options vary depending on the Speedlite model, its Custom Function settings, the flash mode, and other factors. Refer to the instruction manual of your flash unit for details on its functions. Sample display (1) Flash mode (2) Wireless func.
Flash mode You can select the flash mode to suit your desired flash photography. • [E-TTL II] is the standard mode of EL/EX-series Speedlites that support autoexposure flash photography. • [Manual flash] is for setting the Speedlite's [Flash output] yourself. • [CSP] (Continuous shooting priority mode) is available when using a compatible Speedlite. This mode automatically reduces flash output by one stop and increases ISO speed by one stop.
Wireless functions You can use radio or optical wireless transmission to shoot with wireless multiple-flash lighting. For details on wireless flash, refer to the Instruction Manual of a Speedlite compatible with wireless flash photography. Firing ratio control With a macro flash, you can set the firing ratio control. For details on firing ratio control, refer to the macro flash's Instruction Manual.
Shutter synchronization Normally, set this to [First-curtain synchronization] so that the flash fires immediately after the shooting starts. Set to [Second-curtain synchronization] and use low shutter speeds for natural-looking shots of subject motion trails, such as car headlights. Set to [High-speed synchronization] for flash photography at higher shutter speeds than the maximum flash sync shutter speed.
Flash exposure bracketing External Speedlites equipped with flash exposure bracketing (FEB) can change the external flash output automatically as three shots are taken at once.
External Flash Custom Function Settings For details on the external Speedlite's Custom Functions, refer to the Speedlite's Instruction Manual. Caution With an EL/EX series Speedlite, the Speedlite will always fire at full output if the [Flash metering mode] Custom Function is set to [1:TTL] (autoflash). The external Speedlite's Personal Function (P.Fn) cannot be set or canceled from the camera's [ : External flash func. setting] screen. Set it directly on the external Speedlite.
Clear Flash Settings/Clear All Speedlite Custom Functions 1. Select [Clear settings]. 2. Select the settings to be cleared. Select [Clear built-in flash set.], [Clear external flash set.], or [Clear ext. flash C.Fn set.]. On the confirmation screen, select [OK] to clear all flash settings or Custom Function settings.
Shooting With External Flash Units EL/EX Series Speedlites for EOS Cameras Canon Speedlites Other Than the EL/EX Series Non-Canon Flash Units EL/EX Series Speedlites for EOS Cameras The camera supports flash photography using all functions of EL/EX series Speedlites (sold separately). For instructions, refer to the EL/EX series Speedlite's Instruction Manual.
Non-Canon Flash Units Sync speed The camera can synchronize with non-Canon compact flash units at up to 1/200 sec. With large studio flash units, the flash duration is longer than that of a compact flash unit and varies depending on the model. Be sure to check before shooting if flash sync is properly performed by test shooting at a sync speed of approx. 1/60 sec. to 1/30 sec. Caution Manually lower the built-in flash before attaching an external flash unit.
Wireless Flash Photography Using Optical Transmission Receiver Setup and Positioning Canceling Receiver Auto Power Off Methods of Wireless Flash Photography Using Optical Transmission You can use the built-in flash as the sender for external Canon Speedlites compatible with optical wireless flash photography to shoot with wireless multiple-flash lighting.
Receiver Setup and Positioning Referring to the Instruction Manual of the Speedlite (receiver), configure the following settings. Set up the Speedlite as a receiver. Set the camera and Speedlite to the same channel. To control the flash ratio, set the receiver's flash group. Position the camera and receiver within the following range. Arrange the receiver with its wireless sensor facing the camera. (1) Indoors (2) Outdoors (3) Approx. 10 m (4) Approx. 7 m (5) Approx. 80° (6) Approx.
Methods of Wireless Flash Photography Using Optical Transmission You can use the camera in the following wireless flash photography. Choose a method of shooting that suits your subject, shooting conditions, number of external flash units, or other details. Speedlite No.
Easy Wireless Flash Fully Automatic Shooting With One External Flash Unit Fully Automatic Shooting With Multiple External Flash Units Flash Exposure Compensation These instructions describe simple and basic fully automatic wireless flash photography. Fully Automatic Shooting With One External Flash Unit 1. Manually raise the flash.
2. Select [ 3. Select [Evaluative]. : Flash control]. In [E-TTL II meter.], select [Evaluative]. 4. Select [Built-in flash settings].
5. Select [EasyWireless]. In [Built-in flash], select [EasyWireless]. 6. Configure [Channel]. Set the same channel (1–4) as the receiver. 7. Take the picture. Just as in normal flash photography, shoot after configuring the camera. To stop wireless flash photography, set [Built-in flash] to [NormalFiring].
Note Set [E-TTL II meter.] to [Evaluative], which can usually obtain standard flash exposure. If [Average] is set, the flash exposure will be averaged for the entire metered scene. Depending on the scene, flash exposure compensation may be necessary. This setting is for expert users. [EasyWireless] is a setting option for photography without using the built-in flash, but the flash will still fire in order to control receivers.
Fully Automatic Shooting With Multiple External Flash Units You can have multiple receivers fire as if they were a single flash unit. This is convenient when a high level of flash output is needed. Set these basic settings. Flash mode: E-TTL II E-TTL II meter.: Evaluative Built-in flash: EasyWireless Channel: (same as receiver) All flash units are controlled to fire with the same output and provide standard exposure.
Flash Exposure Compensation If the results of shooting with flash look too dark or bright, you can set flash exposure compensation to adjust the flash output. 1. Select [ Flash exposure compensation]. If shooting results are too dark, press the < > key to increase flash output, for brighter results. If shooting results are too bright, press the < > key to decrease flash output, for darker results.
Custom Wireless Flash Fully Automatic Shooting With One External Flash Unit and the Built-in Flash Fully Automatic Shooting With Multiple External Flash Units Fully Automatic Shooting With Multiple External Flash Units and the Built-in Flash Flash Exposure Compensation FE Lock Wireless Flash Photography With Manually Set Flash Output Fully Automatic Shooting With One External Flash Unit and the Built-in Flash This fully automatic wireless flash photography uses one external flash unit and the built-in flas
1. Manually raise the flash. 2. Select [ 3. Select [Evaluative]. : Flash control]. In [E-TTL II meter.], select [Evaluative].
4. Select [Built-in flash settings]. 5. Select [CustWireless]. In [Built-in flash], select [CustWireless]. 6. Select [Wireless func.]. In [Wireless func.], select [ 241 : ].
7. Set a firing ratio and take the picture. Select [ : ] and set the firing ratio within 8:1 to 1:1. Setting a firing ratio to the right of 1:1 is not possible. Note If there is not enough flash output from the built-in flash, set a higher ISO speed ( ). Firing ratios from 8:1 to 1:1 correspond to 3:1 to 1:1 (in 1/2-stop increments) when converted to number of stops of exposure.
Fully Automatic Shooting With Multiple External Flash Units Multiple receivers can be treated as a single flash unit or, if you prefer to adjust the firing ratio, as separate groups. The basic settings are as follows, and by adjusting the [Firing group] setting, you can set up a variety of wireless multi-flash photography. Set these basic settings. Flash mode: E-TTL II E-TTL II meter.: Evaluative Wireless func.
[ All] Firing multiple receivers as a single flash unit This is convenient when a high level of flash output is needed. All flash units are controlled to fire with the same output and provide standard exposure. All receivers fire as part of the same group, regardless of whether they are assigned to firing group A, B, or C. 1. Set [Firing group] to [ 2. Take the picture. All].
[ (A:B)] Firing multiple receivers in multiple groups You can divide receivers into flash groups A and B, and you can adjust the relative output of each to obtain the desired lighting. Referring to the instruction manual of the flash unit, assign some receivers to firing group A and others to firing group B, and arrange them as shown. 1. Manually raise the flash.
2. Select [ 3. Select [Evaluative]. : Flash control]. In [E-TTL II meter.], select [Evaluative]. 4. Select [Built-in flash settings].
5. Select [CustWireless]. In [Built-in flash], select [CustWireless]. 6. Select [Wireless func.]. Select [ 7. ]. Set [Firing group] to [ (A:B)].
8. Set the A:B firing ratio and shoot. Select [A:B fire ratio], and set the ratio. Caution Flash units in group C will not fire when [Firing group] is set to [ (A:B)]. Note Firing ratios from 8:1 to 1:1 to 1:8 correspond to 3:1 to 1:1 to 1:3 (in 1/2-stop increments) when converted to number of stops of exposure.
Fully Automatic Shooting With Multiple External Flash Units and the Built-in Flash The built-in flash can be added to Fully Automatic Shooting With Multiple External Flash Units. The basic settings are as follows, and by adjusting the [Firing group] setting, you can set up a variety of wireless multi-flash photography that also uses the built-in flash. Set these basic settings. Flash mode: E-TTL II E-TTL II meter.: Evaluative Wireless func.: [ + ] Channel: (same as receiver) 1. Select [Firing group].
[ All and [ (A:B) 250 ] ]
Flash Exposure Compensation Available when [Flash mode] is set to [E-TTL II]. Note that the setting items available for flash exposure compensation (see below) vary depending on [Wireless func.] and [Firing group] setting details. [Flash exposure compensation] The same amount of flash exposure compensation is set for the built-in flash and all external flash units. [ exp. comp.] Enables you to apply flash exposure compensation to the built-in flash. [ exp. comp.
Wireless Flash Photography With Manually Set Flash Output Available when [Flash mode] is set to [Manual flash]. Available flash output options (such as [ Flash output] and [Group A output]) vary depending on [Wireless func.] setting details (see below). [Wireless func.: ] [Firing group: All] The same manual flash output is set for all external flash units. [Firing group: (A:B)] Receivers can be assigned to flash group A or B, and you can set the flash output of each. [Wireless func.
Shooting and Recording This chapter describes shooting and introduces menu settings on the shooting ([ • Still Photo Shooting • Movie Recording 253 ]) tab.
Still Photo Shooting to the right of page titles indicates functions only available in Creative Zone modes.
Tab Menus: Still Photo Shooting (Viewfinder Shooting) Shooting 1 (1) Image quality (2) Still img aspect ratio (3) Review duration (4) Release shutter without card (5) Lens aberration correction (6) Flash control Shooting 2 (1) Expo.comp.
Shooting 3 (1) White balance (2) Custom White Balance (3) WB Shift/Bkt. (4) Color space (5) Picture Style Picture Style Selection Picture Style Customization Picture Style Registration Shooting 4 (1) Long exp. noise reduction (2) High ISO speed NR (3) Dust Delete Data (4) Live View shoot. (5) Anti-flicker shoot.
Shooting 5 (1) Lens electronic MF (2) AF-assist beam firing In Basic Zone modes, the following screens are displayed.
Shooting 2 (1) Retain Creative Assist data (2) Live View shoot.
Tab Menus: Still Photo Shooting (Live View Shooting) Shooting 1 (1) Image quality (2) Still img aspect ratio (3) Review duration (4) Release shutter without card (5) Lens aberration correction (6) Flash control Shooting 2 (1) Expo.comp.
Shooting 3 (1) White balance (2) Custom White Balance (3) WB Shift/Bkt. (4) Color space (5) Picture Style Picture Style Selection Picture Style Customization Picture Style Registration Shooting 4 (1) Long exp.
Shooting 5 (1) AF method (2) Eye Detection AF (3) Continuous AF (4) Lens electronic MF (5) AF-assist beam firing (6) MF peaking settings In Basic Zone modes, the following screens are displayed. Note that available setting items vary by shooting mode.
Shooting 2 (1) Retain Creative Assist data (2) Touch Shutter Shooting 3 (1) AF method (2) Eye Detection AF (3) Continuous AF (4) AF-assist beam firing (5) MF peaking settings 262
Image Quality RAW Images Guide to Image Quality Settings Maximum Burst for Continuous Shooting 1. Select [ 2. Set the image quality. : Image quality]. To select the RAW quality, turn the < > dial, and to select the JPEG quality, press the < >< > keys. Press < > to set it. Caution Number of shots available as indicated by [****] on the image quality setting screen always applies to a setting of [3:2], regardless of the actual aspect ratio setting ( ).
Note If [–] is set for both the RAW image and JPEG image, will be set. If you select both RAW and JPEG, each time you shoot, the image will be recorded simultaneously to the card as both a RAW and JPEG image at your specified image qualities. The two images will be recorded with the same file numbers (file extension: .JPG for JPEG and .CR3 for RAW). is in (Fine) quality. Meaning of image quality icons: RAW, Compact RAW, JPEG, Fine, Normal, Large, Medium, Small.
RAW Images RAW images are raw data from the image sensor that are recorded to the card digitally as or (smaller than ) files, depending on your selection. RAW images can be processed using [ : RAW image processing] ( ) to save them as JPEG images. As the RAW image itself does not change, you can process the RAW image to create any number of JPEG images with various processing conditions. You can use Digital Photo Professional (EOS software) to process RAW images.
Maximum Burst for Continuous Shooting The approximate maximum burst is shown as a number or other indication at the top of the shooting screen in Live View shooting and in the lower right of the viewfinder in viewfinder shooting. Note When the maximum burst indicator is “99” in Live View shooting, you can shoot 99 shots or more continuously. The value starts decreasing once it reaches 98 or less. When the maximum burst indicator is “9” in viewfinder shooting, you can shoot 9 shots or more continuously.
Still Image Aspect Ratio You can change the image's aspect ratio. 1. Select [ 2. Set the aspect ratio. : Still img aspect ratio]. Select an aspect ratio, then press < >. JPEG images The images will be recorded with the set aspect ratio. RAW images The images will always be recorded in the [3:2] aspect ratio.
Aspect Ratio Aspect Ratio Aspect Ratio 4:3 16:9 1:1 In viewfinder shooting In Live View shooting Note RAW images shot at an aspect ratio of [4:3], [16:9], or [1:1] are displayed during playback with lines indicating the respective aspect ratio, but these lines are not recorded in the image.
Image Review Time Set to [Hold] to keep the captured image displayed after you shoot, or set to [Off] if you prefer not to have shots displayed. 1. Select [ 2. Set a time option. : Review duration]. Note When [Hold] is set, images are displayed until the time set in [ : Auto power off] elapses.
Shutter Release Without Card You can set the camera not to shoot unless there is a card in the camera. The default setting is [Enable]. 1. Select [ 2. Select [Disable]. : Release shutter without card].
Lens Aberration Correction Peripheral Illumination Correction Distortion Correction Digital Lens Optimizer Chromatic Aberration Correction Diffraction Correction Vignetting, image distortion, and other issues may be caused by lens optical characteristics. The camera can compensate for these phenomena by using [Lens aberration correction]. 1. Select [ 2. Select an item. : Lens aberration correction].
3. Select [Enable]. Confirm that the name of the attached lens and [Correction data available] are displayed (except when [Diffraction correction] is set). If [Correction data not available] or [ Optimizer. ] is displayed, see Digital Lens Peripheral Illumination Correction Vignetting (dark image corners) can be corrected. Caution Depending on shooting conditions, noise may appear on the image periphery. The higher the ISO speed, the lower the correction amount will be.
Distortion Correction Distortion (image warping) can be corrected. Caution To correct distortion, the camera captures a narrower image area than the area seen when shooting, which crops the image a little and slightly lowers the apparent resolution. Setting distortion correction may change the angle of view slightly. When you magnify images, distortion correction is not applied to the images displayed. Distortion correction is not applied in movie recording.
Digital Lens Optimizer Various aberrations from lens optical characteristics can be corrected, along with diffraction and low-pass filter-induced loss of resolution. If [Correction data not available] or [ ] is displayed by [Digital Lens Optimizer], you can use EOS Utility to add the lens correction data to the camera. For details, refer to the EOS Utility Instruction Manual. Caution Depending on shooting conditions, noise may be intensified together with the effects of correction.
Chromatic Aberration Correction Chromatic aberration (color fringing around subjects) can be corrected. Note [Chromatic aberr corr] is not displayed when [Digital Lens Optimizer] is enabled.
Diffraction Correction Diffraction (loss of sharpness caused by the aperture) can be corrected. Caution Depending on shooting conditions, noise may be intensified together with the effects of correction. The higher the ISO speed, the lower the correction amount will be. For movie recording, [Diffraction correction] will not appear. (Correction is not possible.) Note “Diffraction correction” corrects diffraction as well as degraded resolution from the low-pass filter and other factors.
Note General notes for lens aberration correction The effect of the lens aberration correction varies depending on the lens used and shooting conditions. Also, the effect may be difficult to discern depending on the lens used, shooting conditions, etc. If the correction is difficult to discern, magnifying and checking the image after shooting is recommended. Corrections can be applied even when an extender or life-size converter is attached.
Exposure Compensation/AEB Setting You can capture three images at different shutter speeds, aperture values, and ISO speeds, as adjusted by the camera. This is called AEB. * AEB stands for Auto Exposure Bracketing. 1. Select [ 2. Set the AEB range. : Expo.comp./AEB]. Turn the < > dial to set the AEB range (1). Press the < keys to set the exposure compensation level. Press < >< > to set it. When you press the shutter button halfway, the AEB range will be displayed in the viewfinder.
3. Take the picture. Standard exposure Decreased exposure Increased exposure Three bracketed shots are taken, according to the specified drive mode, in this sequence: Standard exposure, decreased exposure, and increased exposure. AEB will not be automatically canceled. To cancel AEB, follow step 2 to turn off the AEB range display. Caution Exposure compensation in AEB may be less effective with [ Optimizer] ( ) set to an option other than [Disable].
ISO Speed Settings (Still Photos) [AUTO] ISO Speed Maximum [AUTO] ISO Speed Set the ISO speed (image sensor's sensitivity to light) to suit the ambient light level. In Basic Zone modes, ISO speed is set automatically. For details on ISO speed in movie recording, see ISO Speed in Movie Recording. 1. Press the < > button ( 280 ).
2. Set the ISO speed. Select the ISO speed with the < >< > keys or the < while watching the viewfinder or screen, then press < >. > dial ISO speed can be set within ISO 100–25600. With [AUTO] selected, the ISO speed will be set automatically ( To specify [AUTO] when setting [ISO speed] in [ settings] (shown above), you can press the < 281 ). : ISO speed > button.
ISO speed guide Low ISO speeds reduce image noise but may increase the risk of camera/subject shake or reduce the area in focus (shallower depth of field), in some shooting conditions. High ISO speeds enable low-light shooting, a larger area in focus (deeper depth of field), and longer flash range but may increase image noise. Note Can also be set on the [ISO speed] screen in [ : ISO speed settings]. Under [ : Custom Functions(C.
[AUTO] ISO Speed If the ISO speed is set to [AUTO], the actual ISO speed setting will be displayed in the viewfinder or on the screen when you press the shutter button halfway. When [AUTO] is set, the ISO speed is indicated in whole-stop increments. However, the ISO speed is actually set in finer increments. Therefore, in the image's shooting information ( ), you may find an ISO speed such as ISO 125 or ISO 640 displayed as the ISO speed.
Maximum [AUTO] ISO Speed For ISO Auto, you can set the maximum ISO speed limit within ISO 400–25600. 1. Select [ 2. Select [Max for Auto]. : ISO speed settings]. Select [Max for Auto], then press < 3. >. Select the ISO speed. Select the ISO speed, then press < 284 >.
Auto Lighting Optimizer Brightness and contrast can be corrected automatically if shots look dark or contrast is too low or high. 1. Select [ 2. Set a correction option. : Auto Lighting Optimizer]. Caution Noise may increase and apparent resolution may change, under some shooting conditions. If the effect of Auto Lighting Optimizer is too strong and results are not at your preferred brightness, set to [Low] or [Disable].
Note In step 2, if you press the < > button and remove the checkmark [ ] for [Disable during man expo] setting, [ : Auto Lighting Optimizer] can also be set even in < > mode.
Highlight Tone Priority You can reduce overexposed, clipped highlights. 1. Select [ 2. Set an option. : Highlight tone priority]. [Enable]: Improves gradation in highlights. The gradation between the grays and highlights becomes smoother. [Enhanced]: Reduces overexposed highlights even more than [Enable], under some shooting conditions. Caution Noise may increase slightly. The available ISO range starts at ISO 200. Expanded ISO speeds cannot be set. [Enhanced] is not available when recording movies.
Metering Timer (Live View Shooting) You can set how long the metering timer runs (which determines the duration of exposure display/AE lock) after it is triggered by an action such as pressing the shutter button halfway. 1. Select [ 2. Set a time option. : Metering timer].
White Balance Settings White Balance [ ] Auto White Balance [ ] Custom White Balance [ ] Color Temperature White balance (WB) is for making the white areas look white. Normally, the Auto [ ] (Ambience priority) or [ ] (White priority) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with Auto, you can select the white balance to match the light source or set it manually by shooting a white object. 1. Press the < 2. Select an option. > button.
(Approx.) Display Mode Color Temperature (K: Kelvin) Auto: Ambience priority 3000–7000 Auto: White priority Daylight 5200 Shade 7000 Cloudy, twilight, sunset 6000 Tungsten light 3200 White fluorescent light 4000 Flash Automatically set* Custom 2000–10000 Color temp. 2500–10000 * Applicable with Speedlites having a color temperature transmission function. Otherwise, it will be fixed to approx. 6000K.
[ ] Auto White Balance With [ ], you can slightly increase the intensity of the image's warm color cast when shooting a tungsten-light scene. If you select [ ], you can reduce the intensity of the image's warm color cast. 1. Select [ 2. Select [ With [ 3. : White balance]. ]. ] selected, press the < Select an option. 291 > button.
Caution Precautions when set to [ ] The warm color cast of subjects may fade. When multiple light sources are included in the scene, the warm color cast of the picture may not be reduced. When using flash, the color tone will be the same as with [ ].
[ ] Custom White Balance With custom white balance, you can manually set the white balance for the specific light source of the shooting location. Always follow these steps under the light source you will use when shooting. 1. Shoot a white object. Aim the camera at a plain white subject, so that white fills the screen. Focus manually and shoot with the standard exposure set for the white object. You can use any of the white balance settings. 2. Select [ 3. Import the white balance data.
4. Select [ : White balance]. 5. Select [ ]. Caution If the exposure obtained in step 1 differs greatly from the standard exposure, a correct white balance may not be obtained. These images cannot be selected: Images captured with Picture Style set to [Monochrome], images with a Creative filter applied before or after shooting, cropped images, or images shot with another camera. Images that cannot be used in the setting may be displayed.
[ ] Color Temperature 1. Select [ 2. Set the color temperature. : White balance]. Select [ Turn the < < >. ]. > dial to set the desired color temperature, then press The color temperature can be set from approx. 2500K to 10000K in 100K increments. Caution When setting the color temperature for an artificial light source, set the white balance correction (magenta or green bias) as necessary.
White Balance Correction White Balance Correction White Balance Auto Bracketing White balance correction has the same effect as using a commercially available color temperature conversion filter or color compensating filter. White Balance Correction 1. Select [ : WB Shift/Bkt.].
2. Set the white balance correction. Sample setting: A2, G1 Press the < > < > or < your preferred position. >< > keys to move the “■” mark to B is for blue, A for amber, M for magenta, and G for green. White balance is corrected in the direction you move the mark. On the right of the screen, [Shift] indicates the direction and correction amount, respectively. Pressing the < Press < > button will cancel all the [WB Shift/Bkt.] settings. > to exit the setting.
White Balance Auto Bracketing White balance bracketing (WB Bkt.) enables you to capture three images at once with different color tones. Set the white balance bracketing amount. B/A bias ±3 levels In step 2 for White Balance Correction, when you turn the < the screen will change to “■ ■ ■” (3 points). > dial, the “■” mark on Turning the dial clockwise sets the B/A bracketing, and turning it counterclockwise sets the M/G bracketing.
Color Space The range of reproducible colors is called the “color space.” For normal shooting, sRGB is recommended. 1. Select [ 2. Set a color space option. : Color space]. Adobe RGB This color space is mainly used for commercial printing and other industrial uses. Recommended when using equipment such as Adobe RGB-compatible monitors or DCF 2.0 (Exif 2.21 or later) compatible printers. Note File names of still photos shot in the Adobe RGB color space begin with “_”. The ICC profile is not appended.
Picture Style Selection Picture Style Characteristics Symbols Just by selecting a preset Picture Style, you can obtain image characteristics effectively matching your photographic expression or the subject. 1. Press the < > button. The Picture Style selection screen will appear. 2. Select a Picture Style. Select a Picture Style, then press < >. The Picture Style will be set. Note You can also make your selection from [ 300 : Picture Style].
Picture Style Characteristics [ ] Auto The color tone will be adjusted automatically to suit the scene. The colors will look vivid for blue skies, greenery and sunsets, particularly in nature, outdoor, and sunset scenes. Note If the desired color tone is not obtained with [Auto], use another Picture Style. [ ] Standard The image looks vivid, sharp, and crisp. Suitable for most scenes. [ ] Portrait For nice skin tones. The image looks softer. Suited for close-up portraits.
[ ] Monochrome Creates black-and-white images. Caution Color images cannot be recovered from JPEG images shot with the [Monochrome] Picture Style. Note You can also set the camera to display < [Monochrome] is set ( ). > in the viewfinder for when [ ] User Def. 1–3 You can register a basic style such as [Portrait], [Landscape], a Picture Style file, etc. and adjust it as desired ( ).
Symbols The Picture Style selection screen has icons for [Strength], [Fineness], or [Threshold] for [Sharpness] as well as [Contrast] and other parameters. The numbers indicate the values for these settings specified for the respective Picture Style. Sharpness Strength Fineness Threshold Contrast Saturation Color tone Filter effect (Monochrome) Toning effect (Monochrome) Caution During movie recording, an asterisk “*” will be displayed for both [Fineness] and [Threshold] for [Sharpness].
Picture Style Customization Settings and Effects [ ] Monochrome Adjustment You can customize any Picture Style by changing it from the default settings. For details on customizing [Monochrome], see [ ] Monochrome Adjustment. 1. Press the < > button. The Picture Style selection screen will appear. 2. Select a Picture Style. Select the Picture Style to adjust, then press the < 3. > button. Select an option. For details on settings and effects, see Settings and Effects.
4. Set the effect level. Press the < > button to save the adjusted setting and return to the Picture Style selection screen. Any settings you change from default values are displayed in blue.
Settings and Effects Sharpness Strength 0: Weak outline emphasis Fineness*1 1: Fine 7: Strong outline emphasis 5: Grainy Threshold*2 1: Low 5: High Contrast –4: Low contrast +4: High contrast Saturation –4: Low saturation +4: High saturation Color tone –4: Reddish skin tone +4: Yellowish skin tone * 1: Indicates the fineness of the outlines to be emphasized. The smaller the number, the finer the outlines that can be emphasized.
[ ] Monochrome Adjustment [ ] Filter effect With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more. Filter Sample Effects N:None Normal black-and-white image with no filter effects. Ye:Yellow The blue sky will look more natural, and the white clouds will look crisper. Or:Orange The blue sky will look slightly darker. The sunset will look more brilliant. R:Red The blue sky will look quite dark. Fall leaves will look crisper and brighter.
[ ] Toning effect By applying a toning effect, you can create a monochrome image in the selected color. Effective when you want to create memorable images.
Picture Style Registration You can select a base Picture Style such as [Portrait] or [Landscape], adjust it as desired, and register it under [User Def. 1]–[User Def. 3]. Useful when creating several Picture Styles with different settings. Picture Styles that you have registered on the camera using EOS Utility (EOS software, ) can also be modified here. 1. Press the < > button. The Picture Style selection screen will appear. 2. Select a user-defined style number. Select a number from [User Def.
4. Select the base Picture Style. Select the base Picture Style. Also select styles this way when adjusting styles registered to the camera with EOS Utility (EOS software). 5. Select an item.
6. Set the effect level. For details, see Picture Style Customization. Press the < > button to save the adjusted setting and return to the Picture Style selection screen. The base Picture Style will be indicated on the right of [User Def. *]. Blue style names indicate that you have changed the settings from default values. Caution If a Picture Style is already registered under [User Def.
Noise Reduction Features Long Exposure Noise Reduction High ISO Speed Noise Reduction Long Exposure Noise Reduction For images exposed for 1 sec. or longer, noise (dots of light and banding) typical of long exposures can be reduced. 1. Select [ : Long exp. noise reduction].
2. Set a reduction option. [ ] Auto For exposures of 1 sec. or longer, noise reduction is performed automatically if noise typical of long exposures is detected. This setting is effective enough in most cases. [ ] Enable Noise reduction is performed for all exposures of 1 sec. or longer. The [Enable] setting may reduce noise that cannot be detected with the [Auto] setting. Caution With [Auto] or [Enable] set, noise reduction after you shoot may take as long as exposure for the shot.
High ISO Speed Noise Reduction This function reduces the noise generated in the image. This function is especially effective when shooting at high ISO speeds. When shooting at low ISO speeds, the noise in the darker parts of the image (shadow areas) can further be reduced. 1. Select [ 2. Set the level. : High ISO speed NR]. [ ] Multi Shot Noise Reduction Applies the noise reduction with higher image quality than [High].
Caution [Multi Shot Noise Reduction] Precautions If there is significant misalignment in the image due to camera shake, the noise reduction effect may become smaller. Be careful about camera shake in handheld shots. Using a tripod is recommended. If you shoot a moving subject, the moving subject may leave afterimages. Auto image alignment may not function properly with repetitive patterns (lattice, stripes, etc.) or flat, single-tone images.
Appending Dust Delete Data Preparation Dust Delete Data Acquisition Dust Delete Data Appending Dust Delete Data used to erase dust spots can be appended to images in case sensor cleaning leaves dust on the sensor. The Dust Delete Data is used by Digital Photo Professional (EOS software) to erase the dust spots automatically. Preparation Prepare a solid white object such as a sheet of paper. Set the lens focal length to 50 mm or longer.
Dust Delete Data Acquisition 1. Select [ : Dust Delete Data].
2. Select [OK]. After the automatic self-cleaning of the sensor is performed, a message will appear. Although there will be a mechanical sound of the shutter during the cleaning, no picture is taken.
3. Shoot a plain white object. Shoot with a plain white object (such as a new sheet of white paper) filling the screen, at a distance of 20–30 cm (0.7–1.0 ft.). Since the image will not be saved, the data can still be obtained even if there is no card in the camera. When the picture is taken, the camera will start collecting the Dust Delete Data. When the Dust Delete Data is obtained, a message will appear. If the data is not obtained successfully, an error message will appear.
Dust Delete Data Appending Once acquired, Dust Delete Data is appended to still photos captured after that point. Acquiring Dust Delete Data before shooting is recommended. For details about using Digital Photo Professional (EOS software) to erase dust spots automatically, refer to the Digital Photo Professional Instruction Manual. File size is essentially unaffected by Dust Delete Data appended to images.
Anti-Flicker Shooting Uneven exposure and color may result if you shoot at fast shutter speeds under flickering light sources such as fluorescent lights, due to uneven vertical exposure. Anti-flicker shooting enables viewfinder shooting at moments when exposure and colors are less affected by flickering. 1. Select [ 2. Select [Enable]. 3. Take the picture. : Anti-flicker shoot.].
Caution When [Enable] is set and you shoot under a flickering light source, the shutterrelease time lag may become longer. Also, the continuous shooting speed may become slower, and the shooting interval may become irregular. Not applied to mirror lockup shots, Live View shooting, or movie recording. Flicker at a frequency other than 100 Hz or 120 Hz cannot be detected. Also, if the flickering frequency of the light source changes during continuous shooting, effects of the flicker cannot be reduced.
Continuous AF (Live View Shooting) This function keeps subjects generally in focus in Live View shooting. The camera is ready to focus immediately when you press the shutter button halfway. 1. Select [ 2. Select [Enable]. : Continuous AF]. Caution Enabling this function reduces the number of shots available, because the lens is driven continuously and battery power is consumed.
Lens Electronic MF For EF or EF-S lenses equipped with electronic manual focusing, you can specify how manual focus adjustment is used with One-Shot AF. 1. Select [ 2. Select an option. : Lens electronic MF]. Disable after One-Shot AF After the AF operation, manual focusing adjustment is disabled. Enable after One-Shot AF You can manually adjust the focus after the AF operation if you keep holding down the shutter button halfway.
AF-Assist Beam Firing You can specify to use the AF-assist beam of the built-in flash or a Speedlite in viewfinder shooting. 1. Select [ 2. Select an option. : AF-assist beam firing]. [ ] Enable Enables firing of the AF-assist beam, when needed. Raise the built-in flash if you will use it to fire the AF-assist beam. [ ] Disable Disables firing of the AF-assist beam. Set if you prefer not to fire the AF-assist beam.
Caution If an external Speedlite's [AF-assist beam firing] Custom Function is set to [1:Disabled], the AF-assist beam will not be fired. Note The AF-assist beam of an attached EX series Speedlite equipped with an LED light will fire as needed from the Speedlite's LED light in Live View shooting when you specify [Enable] or [Enable external flash only].
General Still Photo Shooting Precautions Both Viewfinder and Live View Shooting In Live View Shooting Information Display in Live View Shooting Both Viewfinder and Live View Shooting Caution Image quality When you shoot at high ISO speeds, noise (such as dots of light and banding) may become noticeable. Shooting in high temperatures may cause noise and irregular colors in the image.
In Live View Shooting Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera's internal components. Image quality Frequent shooting over an extended period may cause the camera's internal temperature to rise and affect image quality. When you are not shooting, always turn off the camera. If you shoot a long exposure while the camera's internal temperature is high, image quality may decline.
Images and display Under low- or bright-light conditions, the displayed image may not reflect the brightness of the captured image. Under low light, noise may be noticeable in image display even at low ISO speeds, but there will be less noise in your shots, because image quality varies between display and captured images. The screen or exposure value may flicker if the light source (lighting) changes. In this case, stop shooting temporarily and resume under the light source you will use.
Information Display in Live View Shooting For details on the icons displayed for still photo shooting, see Live View Shooting Screen. Note When [ ] is displayed in white, it indicates that the image is displayed at the brightness level closely matching that of the actual image to be captured. If the [ ] icon is blinking, it indicates that the image is displayed at a brightness that differs from the actual shooting result because of low- or bright-light conditions.
Movie Recording For movie recording, set the power switch to < (< >. to the right of page titles indicates functions only available in Creative Zone modes >, < >, < >, or < >). Caution When switching from still photo shooting to movie recording, check the camera settings again before recording movies.
Tab Menus: Movie Recording Shooting 1 (1) Movie rec.
Shooting 3 (1) Exposure comp.
Shooting 4 (1) White balance (2) Custom White Balance (3) WB correction (4) Picture Style Picture Style Selection Picture Style Customization Picture Style Registration (5) HDMI info disp Shooting 5 (1) AF method (2) Movie Servo AF (3) Eye Detection AF (4) Lens electronic MF (5) MF peaking settings 334
Movie Recording Autoexposure Movie Recording Manual Exposure Movie Recording ISO Speed in Mode Available Shutter Speeds Still Photo Shooting Information Display (Movie Recording) Autoexposure Movie Recording Autoexposure control will take effect to suit the scene's current brightness. 1. >. Set the power switch to < After the sound of the reflex mirror moving, the image appears on the screen. 2. Set the Mode dial to a mode other than < 335 >, < >, or < >.
3. Focus on the subject. Before recording a movie, focus with AF ( ) or manual focus ( ). By default, [ : Movie Servo AF] is set to [Enable] so that the camera always keeps focusing ( ). When you press the shutter button halfway, the camera will focus with the current AF method.
4. Record the movie. Press the < > button to start recording a movie. You can also start recording a movie by tapping [ ] on the screen. Note [ ] is not displayed under the following settings. • [Video snapshot] is set to [Enable] • [Time-lapse movie] is set to an option other than [Disable] • In < • In < > mode (movie) > mode (HDR movie) While the movie is being recorded, the [ in the upper right of the screen.
ISO speed in Basic Zone modes The ISO speed will be set automatically within ISO 100–12800. ISO speed in < >, < >, and < > modes The ISO speed will be set automatically within ISO 100–12800. The maximum varies depending on the [Max for Auto] setting in [ : ISO speed settings] ( ). Under [ : Custom Functions(C.Fn)], if [2: ISO expansion] is set to [1:Enable], [H(25600)] can also be selected for [Max for Auto]. Caution When the < > mode is set, HDR movie recording takes effect ( ).
Manual Exposure Movie Recording You can manually set the shutter speed, aperture value, and ISO speed for movie recording. 1. Set the power switch to < 2. Set the Mode dial to < 3. Set the ISO speed. >. >. Press the < > button. The ISO speed setting screen is displayed. Set with the < > or < 339 > dial.
4. Set the shutter speed and aperture value. Press the shutter button halfway and check the exposure level indicator. To set the shutter speed (1), turn the < aperture value (2), turn the < > dial. 5. > dial, and to set the Focus and record the movie. The procedure is the same as steps 3 and 4 for Autoexposure Movie Recording.
Caution During movie recording, avoid changing the shutter speed, aperture value, or ISO speed, which may record changes in the exposure or create more noise at high ISO speeds. When recording a movie of a moving subject, a shutter speed of approx. 1/25 sec. to 1/125 sec. is recommended. The faster the shutter speed, the less smooth the subject's movement will look. If you change the shutter speed while recording under fluorescent or LED lighting, image flicker may be recorded.
Available Shutter Speeds Shutter speed in < > mode can be set in a range of 1/4000–1/8 sec. Caution The available shutter speeds will differ for time-lapse movie recording ( ). Still Photo Shooting Still photos cannot be taken during movie recording. To take still photos, stop the movie recording and perform viewfinder shooting or Live View shooting.
Information Display (Movie Recording) For details on the icons on the movie recording screen, see Movie Recording Screen. Caution Precautions for movie recording Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera's internal components. If you record something that has fine detail, moire or false colors may result.
Note Notes for movie recording Each time you record a movie, a new movie file is created on the card. The movie's field of view coverage for recording 4K, Full HD, and HD movies is approx. 100%. To enable starting or stopping movie recording by pressing the shutter button completely, you can set [Fully-press] for [ : Shutter btn function for movies] to [Start/stop mov rec]. Stereo sound is recorded by the camera's built-in microphones ( ).
HDR Movies You can record high dynamic range movies that retain detail in highlights of high-contrast scenes. 1. Set the Mode dial to < 2. Record an HDR movie. >. Record the movie in the same way as normal movie recording ( 345 ).
Caution Since multiple frames are merged to create an HDR movie, certain parts of the movie may look distorted. This is more noticeable in shots affected by camera shake, so consider using a tripod. Note that even if a tripod is used for recording, afterimages or noise may become more noticeable, compared to normal playback, when the HDR movie is played back frame-by-frame or in slow motion. Not available for Movie digital zoom, video snapshots, time-lapse movies, or Movie digital IS.
Creative Filters In < > (creative filters) mode, you can record movies with filter effects applied. 1. Set the Mode dial to < 2. Press the < >. > button ( ). The Quick Control screen will appear. 3. Select [ ]. Use the < > < left, then press < > keys to select [ >.
4. Select a filter effect. Use the < < >. >< > keys to select a filter effect ( ), then press The image is shown with the filter effect applied. For [Miniature effect movie], move the AF point into position for focusing. Move the scene frame if the AF point is outside of it, so that the AF point is aligned with it. 5. Adjust the filter effect level. Press the < Use the < > button and select the icon below [Movie self-timer]. >< > keys to adjust the effect, then press < >.
Caution A magnified view is not available. No histogram is displayed. Not available for Movie digital zoom, video snapshots, time-lapse movies, or Movie digital IS. Note The recording size is [ ]/[ ] (NTSC) or [ ] (PAL). In Creative Zone modes, Creative filter settings are available from the Quick Control screen ( ).
Creative Filter Characteristics Dream Applies a soft, dreamy, otherworldly appearance. Gives the movie a soft look overall, blurring the periphery of the screen. You can adjust the blurry areas along the screen edges by adjusting the filter effect. Old Movies Creates an atmosphere like an old film by adding wavering, scratches, and flickering effects to the image. The top and bottom of the screen are masked in black. You can modify the wavering and scratch effects by adjusting the filter effect.
Caution Subjects such as the sky or white walls may not be rendered with smooth gradation and may have noise or irregular exposure or colors. [ ] Sound is not recorded. Movie Servo AF will not function. Editing is not available for movies with a playback time less than 1 sec. ( 351 ).
Movie Recording Size Image Size 4K Movie Recording Frame Rate (fps: frame per second) Compression Method Movie Recording Format Cards That Can Record Movies Movie Files Exceeding 4 GB Total Movie Recording Time and File Size Per Minute Movie Recording Time Limit In [ : Movie rec. size], you can set the image size, frame rate, and compression method. The movie will be recorded as an MP4 file. Note that the frame rate will be switched automatically according to the [ : Video system] setting ( ).
Image Size [ ] 3840×2160 The movie is recorded in 4K quality. The aspect ratio is 16:9. [ ] 1920×1080 The movie will be recorded in Full High-Definition (Full HD) quality. The aspect ratio is 16:9. [ ] 1280×720 The movie is recorded in High-Definition (HD) quality. The aspect ratio is 16:9. Caution If you change the [ : Video system] setting, also set [ : Movie rec. size] again. Normal playback of 4K and / movies may not be possible on other devices, because playback is processing-intensive.
4K Movie Recording Recording 4K movies requires a high-performance card. For details, see Cards That Can Record Movies. Recording 4K movies greatly increases the processing load, which may cause the camera's internal temperature to increase faster or become higher than for regular movies. If a red icon appears during movie recording, the card may be hot, so stop recording the movie and let the camera cool down before removing the card. (Do not remove the card immediately.
Compression Method [ ] IPB (Standard) Compresses multiple frames at a time efficiently for recording. [ ] IPB (Light) Since the movie is recorded at a bit rate lower than with IPB (Standard), the file size will be smaller than with IPB (Standard) and the playback compatibility will be higher. This will make the possible recording time longer than with IPB (Standard) (with a card having the same capacity).
Cards That Can Record Movies For details on cards that can record at each level of movie recording quality, see Card performance requirements. Test cards by recording a few movies to make sure they can record correctly at your specified size ( ). Caution Format cards before recording 4K movies ( ). If you use a slow-writing card when recording movies, the movie may not be recorded properly. Also, if you play back a movie on a card with a slow reading speed, the movie may not be played back properly.
Movie Files Exceeding 4 GB Even if you record a movie exceeding 4 GB, you can keep recording without interruption. Using SD/SDHC cards formatted with the camera If you use the camera to format an SD/SDHC card, the camera will format it in FAT32. With a FAT32-formatted card, if you record a movie and the file size exceeds 4 GB, a new movie file will be created automatically. When you play back the movie, you will have to play back each movie file individually.
Total Movie Recording Time and File Size Per Minute For details on file sizes and the recording time available at each movie recording size, see Estimated recording time, movie bit rate, and file size. Movie Recording Time Limit The maximum recording time per movie is 29 min. 59 sec. Once 29 min. 59 sec. is reached, recording automatically stops. You can start recording a movie again by pressing the < > button (which records the movie as a new file).
Digital Zoom With the recording size set to [ ]/[ shoot with approx. 3–10× digital zoom. ] (NTSC) or [ 1. Set the Mode dial to a mode other than < 2. Select [ 3. Select an option. ] (PAL), you can > or < : Digital zoom]. Select the amount to zoom, then press < 359 >. >.
4. Use digital zoom. Press the < >< > keys. The digital zoom bar will appear. Press the < > key to zoom in or press the < > key to zoom out. When you press the shutter button halfway, the camera will focus with [1-point AF] (fixed at center). To cancel digital zoom, set [Disable] in step 2. Caution Using a tripod to prevent camera shake is recommended. Time-lapse movies, Creative filters, and Movie digital IS are not available. The maximum ISO speed will be ISO 6400.
Movie Self-Timer Movie recording can be started by the self-timer. 1. Select [ 2. Select an option. 3. Record the movie. : Movie self-timer]. After you tap [ ] or press the < > button, the camera displays number of seconds left before recording and beeps. Note To cancel the self-timer, either tap the screen or press < 361 >.
Sound Recording Sound Recording/Sound-Recording Level Wind Filter Attenuator External Microphone You can record movies while recording sound with the built-in stereo microphone or an external stereo microphone. You can also freely adjust the sound-recording level. Use [ : Sound recording] to set sound recording functions. Sound Recording/Sound-Recording Level Auto The sound-recording level is adjusted automatically. Auto level control will take effect automatically in response to the sound level.
Wind Filter Set to [Auto] to reduce wind noise automatically when there is wind outdoors. Only activated when the camera's built-in microphone is used. When the wind filter function takes effect, part of the low bass sounds will also be reduced. Attenuator Automatically suppresses sound distortion caused by loud noises. Set [Sound rec.] to [Enable] if distortion occurs when set to [Auto] or [Manual].
External Microphone If an external microphone equipped with a miniature stereo plug (3.5 mm diameter) is connected to the camera's external microphone IN terminal, the external microphone will be given the priority. Using a microphone such as Directional Stereo Microphone DM-E1 (sold separately) is recommended. Caution Sounds from Wi-Fi operations may be captured with built-in or external microphones. During sound recording, using the wireless communication function is not recommended.
Movie Digital IS The camera's Movie digital IS feature reduces camera shake as movies are recorded. Movie digital IS can provide effective stabilization even when your lens is not equipped with Image Stabilizer. When using a lens equipped with Image Stabilizer, set the lens's Image Stabilizer switch to < >. 1. Select [ 2. Select an option. : Movie digital IS]. Disable ( ) Image stabilization with Movie digital IS is disabled. Enable ( ) Camera shake will be corrected.
Caution Movie digital IS will not function when the lens's optical Image Stabilizer switch is set to < >. With a lens whose focal length is longer than 800 mm, Movie digital IS will not function. Movie digital IS cannot be set in < > or < > mode or when Movie digital zoom, time-lapse movie, or Creative filter is set. The wider the angle of view, the more effective the image stabilization will be. The narrower the angle of view, the less effective the image stabilization will be.
Time-Lapse Movies Still photos shot at a set interval can be stitched together automatically to create a 4K or Full HD time-lapse movie. A time-lapse movie shows how a subject changes in a much shorter period of time than the actual time it took. It is effective for a fixed-point observation of changing scenery, growing plants, celestial motion, etc. Time-lapse movies are recorded in MP4 format at the following quality: (NTSC)/ (PAL) in 4K recording, and (NTSC)/ (PAL) in Full HD recording.
4. Select a scene. Select a scene to suit the shooting situation. For greater freedom when setting the shooting interval and number of shots manually, select [Custom]. 5. Set the shooting interval. Select [Interval/shots]. Select [Interval] (sec.). Use the < press < >. >< Refer to [ : Time required] (1) and [ the number. > keys to set a value, then : Playback time] (2) to set When [Custom] is set Select [Interval] (min.:sec.). Press < Use the < to < >.) > to display < >< >.
6. Set the number of shots. Select [No. of shots]. Use the < press < >. Refer to [ number. : Time required] and [ >< > keys to set a value, then : Playback time] to set the When [Custom] is set Select the digit. Press < > to display < Use the < to < >.) Check that [ >< >. > keys to set a value, then press < >. (Returns : Playback time] is not displayed in red. Select [OK] to register the setting.
Note With [Scene *], available intervals and numbers of shots are restricted, to suit the type of scene. For details on cards that can record time-lapse movies, see Card performance requirements. If the number of shots is set to 3600, the time-lapse movie will be approx. 2 min. in NTSC and approx. 2 min. 24 sec. in PAL. 7. Select the desired movie recording size. (3840×2160) The movie is recorded in 4K quality. The aspect ratio is 16:9. ) for NTSC and 25.00 fps ( ) for The frame rate is 29.
8. Configure [Auto exposure]. Fixed 1st frame When taking the first shot, metering is performed to set the exposure automatically to match the brightness. The exposure setting for the first shot will be applied to subsequent shots. Other shooting-related settings for the first shot will also be applied for subsequent shots. Each frame Metering is also performed for each subsequent shot to set the exposure automatically to match the brightness.
9. Configure [Screen auto off]. Disable Even during time-lapse movie recording, the image will be displayed. (The screen turns off only at the time of shooting.) Note that the screen will turn off when approx. 30 min. elapse after the shooting started. Enable Note that the screen will turn off when approx. 10 sec. elapse after the shooting started. Note During time-lapse movie recording, you can press the < button to turn on/off the screen. 10. Set the beeper. Select [Beep as img taken].
11. Check the settings. (1) Time required Indicates the time required to shoot the set number of shots with the set interval. If it exceeds 24 hours, “*** days” will be displayed. (2) Playback time Indicates the movie recording time (time required to play back the movie) when creating the time-lapse movie in 4K movie or Full HD movie from the still photos taken with the set intervals. 12. Close the menu. Press the < > button to turn off the menu screen.
13. Record the time-lapse movie. Press the < > button and check again the “Time required (1)” and “Interval (2)” displayed on the screen. Press the < movie. > button completely to start recording the time-lapse AF will not work during time-lapse movie recording. “ REC” is displayed in the upper right of the screen as the time-lapse movie is recorded. When the set number of shots are taken, the time-lapse movie recording ends. To cancel recording time-lapse movies, set [Time-lapse] to [Disable].
Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera's internal components. [Time-lapse movie] cannot be set to an option other than [Disable] when the camera is connected to a computer with the interface cable, or when an HDMI cable is connected. Movie Servo AF will not function. If the shutter speed is 1/30 sec.
During time-lapse movie recording, the lens's Image Stabilizer will not operate. If the power switch is set to < >, time-lapse movie recording will be terminated and the setting will be switched to [Disable]. Even if a flash is used, it will not fire. The following operations cancel standby for time-lapse movie recording and switch the setting to [Disable].
Note You can use Wireless Remote Control BR-E1 (sold separately) to start and stop the time-lapse movie recording. Set [ : Remote control] to [Enable] beforehand. With Wireless Remote Control BR-E1 • First, pair the BR-E1 with the camera ( Camera Status/ Remote Control Setting Shooting-ready During time-lapse movie recording < ). > (Immediate Release) <2> (2-sec.
Video Snapshots Configuring Video Snapshot Settings Creating Video Snapshot Albums Adding to an Existing Album Record a series of short video snapshots, each a few seconds long, and the camera will combine them to create a video snapshot album that shows these highlights of your trip or event. Video snapshots are available when the movie recording size is set to (NTSC) / (PAL). Video snapshot albums can also be played back with background music ( ).
3. Specify [Album settings]. Select [Create a new album]. Read the message and select [OK]. 4. Specify [Playback time]. Specify playback time per video snapshot. 5. Specify [Playback effect]. This setting determines how fast albums are played back.
6. Specify [Show confirm msg]. Select [Enable]. 7. Check the required recording time. The time required to record each video snapshot is indicated (1), based on the playback time and effect. 8. Close the menu. Press the < > button to close the menu. A blue bar is displayed to indicate the recording time (2).
Creating Video Snapshot Albums 1. Record the first video snapshot. Press the < > button, then record. The blue bar indicating recording time gradually decreases, and after the specified time elapses, recording stops automatically. A confirmation message is displayed ( 2. ). Save as a video snapshot album. Select [ Save as album]. The clip is saved as the first video snapshot in the album.
3. Record your next video snapshots. Repeat step 1 to record the next video snapshot. Select [ Add to album]. To create another album, select [ Save as a new album]. Repeat step 3 as needed. 4. Stop recording video snapshots. Set [Video snapshot] to [Disable]. To return to normal movie recording, be sure to specify [Disable]. Press the < movie recording.
Options in steps 2 and 3 Option Save as album (step 2) Add to album (step 3) Save as a new album (step 3) Description Saves the clip as the first video snapshot in an album. Adds the current video snapshot to the album recorded most recently. Creates a new album and saves the clip as the first video snapshot. This album file is different from the one recorded most recently. Playback video snapshot (steps 2, 3) Plays the video snapshot just recorded.
Adding to an Existing Album 1. Select [Add to existing album]. In step 3 of Configuring Video Snapshot Settings, select [Add to existing album]. 2. Select an existing album. Use the < < >. >< > keys to select an existing album, then press Select [OK]. Some video snapshot settings will be updated to match settings of the existing album. 3. Close the menu. Press the < > button to close the menu. The video snapshot recording screen is displayed.
4. Record a video snapshot. Record the video snapshot, referring to Creating a Video Snapshot Album. Caution You cannot select an album shot with another camera. Caution General video snapshot precautions No sound is recorded when you set [Playback effect] to [1/2x speed] or [2x speed]. Recording time per video snapshot is only approximate. It may differ slightly from the actual recording time indicated during playback, due to the frame rate and other factors.
Movie Servo AF With this function enabled, the camera focuses on the subject continuously during movie recording. 1. Select [ 2. Select [Enable]. : Movie Servo AF]. When [Enable] is set: • The camera focuses on the subject continuously even when you are not pressing the shutter button halfway. • To keep the focus at a specific position, or if you prefer not to record mechanical sounds from the lens, you can temporarily stop Movie Servo AF by tapping [ ] in the lower left of the screen.
Caution Precautions when [Movie Servo AF] is set to [Enable] Shooting conditions that make focusing difficult • A fast-moving subject approaching or moving away from the camera. • A subject moving at a close distance to the camera. • When shooting with a higher f/number. • Also see Shooting Conditions That Make Focusing Difficult. Since the lens is driven continuously and the battery power is consumed, the possible movie recording time ( ) will be shortened.
Other Menu Functions [ [ 1] [ 2] [ 3] [ 4] 1] Lens aberration correction Peripheral illumination and chromatic aberration can be corrected as you record movies. For details on lens aberration correction, see Lens Aberration Correction.
[ 2] Remote control When [Enable] is set, you can start or stop movie recording using Wireless Remote Control BR-E1 (sold separately). First, pair the BR-E1 with the camera ( ). With Wireless Remote Control BR-E1 For normal movie recording, set the release timing/movie shooting switch to < then press the release button. For time-lapse movie recording, see Time-Lapse Movies.
[ 3] ISO speed settings • ISO speed In [ ] mode, you can set the ISO speed manually. You can also select ISO Auto. • Max for Auto You can set the maximum limit for ISO Auto in movie recording in [ ] mode or in [ ] mode with ISO Auto. Under [ : Custom Functions(C.Fn)], if [2: ISO expansion] is set to [1:Enable], [H(25600)] can also be selected for [Max for Auto]. Highlight tone priority You can reduce overexposed, clipped highlights as you record movies.
Auto slow shutter You can choose whether to record movies that are brighter than when set to [Disable] by automatically slowing the shutter speed under low light. Available in [ ] recording mode. Applies when the frame rate of the movie recording or . size is • Disable Enables you to record movies with smoother, more natural movement, less affected by subject shake than when set to [Enable]. Note that under low light, movies may be darker than when set to [Enable].
[ 4] HDMI info disp You can configure information display for image output via an HDMI cable. With info The image, shooting information, AF points, and other information is shown on the other device via HDMI. Note that the camera screen goes off. Recorded movies are saved to the card. Clean / output HDMI output consists solely of 4K movies. Shooting information and AF points are also displayed on the camera, but no image is recorded to the card. Note that Wi-Fi communication is not available.
General Movie Recording Precautions Caution Red < > internal temperature warning icon If the camera's internal temperature increases due to prolonged movie recording or under a high ambient temperature, a red < > icon will appear. The red < > icon indicates that movie recording will soon be terminated automatically. If this happens, you will not be able to shoot again until the camera's internal temperature decreases, so turn off the power and let the camera cool down a while.
If you use a card with a slow writing speed, an indicator may appear on the right of the screen during movie recording. The indicator shows how much data has not yet been written to the card (remaining capacity of the internal buffer memory), and it increases more quickly the slower the card is. If the indicator (1) becomes full, movie recording will stop automatically. If the card has a fast writing speed, the indicator will either not appear or the level (if displayed) will hardly go upward.
Playback This chapter covers topics related to playback—playing back captured still photos and movies—and introduces menu settings on the Playback ([ ]) tab. Caution Normal display or selection on this camera may not be possible for images captured on other cameras, or images from this camera that have been edited or renamed on a computer. Images that cannot be used with playback functions may be displayed.
• AF Point Display • Resuming from Previous Playback • HDMI HDR Output 396
Tab Menus: Playback Playback 1 (1) Protect images (2) Rotate stills (3) Change mov rotate info (4) Erase images (5) Print order (6) Photobook Set-up 397
Playback 2 (1) Creative filters (2) RAW image processing (3) Creative Assist (4) Quick Control RAW processing (5) Red-eye correction (6) Create album Caution [ : RAW image processing] and [ : Quick Control RAW processing] are not displayed in Basic Zone modes.
Playback 4 (1) Histogram disp (2) AF point disp.
Image Playback Single-Image Display Shooting Information Display Single-Image Display 1. Switch to playback. Press the < > button. The last image captured or played back is displayed.
2. Select an image. To play back images starting with the most recent, turn the < > dial counterclockwise. To play back images starting with the first captured image, turn the dial clockwise. Images can also be selected with the < Each time you press the < >< > keys. > button, the display will change. No information Basic information display Shooting information display 3. Exit the image playback. Press the < > button to exit the image playback and return to shooting standby.
Note When RAW images shot with [ : Still img aspect ratio] set to an option other than [3:2] ( ) are played back, frame lines indicating the image area will be displayed. If the search conditions are set with [ : Set image search conditions] ( ), only the filtered images will be displayed. Shooting Information Display With the shooting information screen displayed ( ), you can press the < change the information displayed at the bottom of the screen.
Index Display (Multiple-Image Display) 1. Switch to the index display. During image playback, press the < > button. The 4-image index display will appear. The selected image is highlighted with an orange frame. Pressing the < > button again switches display from 9 images to 36, and then to 100. Pressing the < > button switches display from 100 images to 36, 9, 4, and then single-image display.
2. Select an image. Turn < selection. > or the < > dial to move the orange frame for image Press < > in the index display to display the selected image in the single-image display.
Touch Playback The camera features a touch-screen panel that you can touch to control playback. Supported touch operations are like those used with smartphones and similar devices. First, press the < > button to prepare for touch playback.
Note You can also magnify display by double-tapping with one finger.
Magnified Image Display 1. Switch to magnified view. During image playback, press the < > button. The magnified view will appear. The magnified area position (1) will be displayed in the lower right of the screen. Each press of the < Each press of the < ( ), press the < > button magnifies display. > button reduces display. For index display > button again after the final reduction.
2. Scroll the image. Press the < > < > < >< > keys to scroll images vertically or horizontally in the direction you press. To cancel the magnified view, press the < [ ].
Movie Playback 1. Switch to playback. Press the < 2. > button. Select a movie. Use the < > dial to select the movie to play back. In single-image display, the [ the screen indicates a movie. ] icon displayed in the upper left of In the index display, perforations at the left edge of a thumbnail indicate a movie. As movies cannot be played back from the index display, press < > to switch to the single-image display.
3. In the single-image display, press < 4. Press < >. > to play back the movie. (1) Speaker The movie will start playing back. You can pause playback and display the movie playback panel by pressing < >. Press it again to resume the playback. Pressing the < > key skips forward approx. 4 sec. during playback. Similarly, pressing the < > key skips back approx. 4 sec. You can also adjust the volume during movie playback by using the < > < > keys.
Movie playback panel Option Playback Operations Play Pressing < > toggles between playback and stop. Slow motion Adjusts the slow motion speed with the < >< speed is indicated in the upper right of the screen. Skip backward Skips backward approx. 4 sec. each time you press < > keys. The slow motion Previous frame Displays the previous frame each time you press < will rewind the movie. Next frame Plays the movie frame-by-frame each time you press < down will fast forward the movie.
Movie Playback Panel (Video Snapshot Albums) Option Playback Operations Play Pressing < > toggles between playback and stop. Slow motion Adjusts the slow motion speed with the < >< speed is indicated in the upper right of the screen. Previous clip Displays the first frame of the previous video snapshot. > keys. The slow motion Previous frame Displays the previous frame each time you press < will rewind the movie.
Editing a Movie's First and Last Scenes 1. In single-image display, press < >. The movie playback panel will appear. 2. On the movie playback panel, select [ 414 ].
3. Specify the part to be edited out. Select either [ ] (Cut beginning) or [ ] (Cut end). Press the < >< > keys to go back or forward one frame (or video > key to fast forward. snapshot) at a time. Keep holding down the < After deciding which part to edit out, press < >. The portion indicated by a line at the bottom of the screen will remain. 4. Check the edited movie. Select [ ] to play back the edited movie. To change the edited part, go back to step 3.
5. Save the image. Select [ ] (1). The save screen will appear. To save it as a new file, select [New file]. To save it and overwrite the original movie file, select [Overwrite]. Select [ ] (2) to save a compressed version of the file. 4K movies are converted to Full HD movies before compression. On the confirmation screen, select [OK] to save the edited movie and return to the movie playback screen. Caution Because editing is performed in approx. 1 sec.
Frame Extraction from 4K Movies or 4K Time-Lapse Movies From 4K movies or 4K time-lapse movies, you can select individual frames to save as approx. 8.3 megapixel (3840×2160) JPEG still images. This function is called “Frame Grab (4K frame capture)”. 1. Switch to playback. Press the < 2. > button. Select a 4K movie or 4K time-lapse movie. Select with the < >< > keys. On the shooting information screen ( ), 4K movies and 4K time-lapse movies are indicated by an [ ] icon. In index display, press < 3.
4. Select a frame to grab. Use the movie playback panel to select the frame to grab as a still photo. For movie playback panel instructions, see Movie Playback Panel. 5. Select [ 6. Save the image. ]. Select [OK] to save the current frame as a JPEG still image.
7. Select the image to display. Check the destination folder and image file number. Select [View original movie] or [View extracted still image]. Caution Frame grabbing is not possible with Full HD movies, Full HD time-lapse movies, or with 4K movies or 4K time-lapse movies from a different camera.
Playback on a TV Set By connecting the camera to a television with an HDMI cable, you can play back the captured still photos and movies on the television. Using the HDMI Cable HTC-100 (sold separately) is recommended. If the image does not appear on the TV screen, check if the [ : Video system] is correctly set to [For NTSC] or [For PAL] (depending on the video system of your television). 1. Connect the HDMI cable to the camera. With the plug's < insert it into the < 2.
5. Press the < > button. The image will appear on the TV screen. (Nothing will be displayed on the camera screen.) Images are automatically displayed at optimal resolution for connected televisions. Caution Adjust movie sound volume with the TV set. The sound volume cannot be adjusted with the camera. Before connecting or disconnecting the cable between the camera and television, turn off the camera and television. Depending on the television, part of the image displayed may be cut off.
Protecting Images Protecting a Single Image Specifying the Range of Images to be Protected Protecting All Images in a Folder or on a Card You can protect important images from being accidentally erased. Protecting a Single Image 1. Select [ 2. Select [Select images]. 3. Select an image. : Protect images]. Use the < >< > keys to select the image to be protected.
4. Protect the image. Press < with a < > to protect the selected image, after which it will be labeled > icon (1) at the top of the screen. To cancel protection and clear the < > icon, press < To protect another image, repeat steps 3 and 4. 423 > again.
Specifying the Range of Images to be Protected While looking at the images in the index display, you can specify the first and last images for a range to protect all the specified images at once. 1. Select [Select range]. Select [Select range] in [ 2. : Protect images]. Specify the range of images. Select the first image (start point). Next, select the last image (end point). The images in the specified range will be protected and the < > icon will appear.
Protecting All Images in a Folder or on a Card You can protect all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [ images], all the images in the folder or on the card will be protected. : Protect To cancel the selection, select [Unprotect all images in folder] or [Unprotect all images on card]. If the search conditions are set with [ : Set image search conditions] ( display will change to [All found images] and [Unprotect all found].
Rotating Still Photos You can use this feature to rotate the displayed image to the desired orientation. 1. Select [ 2. Select an image. : Rotate stills]. Use the < 3. >< > keys to select the image to rotate. Rotate the image. Each time you press < 90°→270°→0°. >, the image will rotate clockwise as follows: To rotate another image, repeat steps 2 and 3.
Note If you set [ : Auto rotate] to [On ] ( ) before taking vertical shots, you need not rotate the image with this function. If the rotated image is not displayed in the rotated orientation during image ].
Changing Movie Orientation Information You can manually change movie orientation information (which determines which side is up). 1. Select [ 2. Select a movie. : Change mov rotate info]. Use the < >< > keys to select a movie with orientation information to change.
3. Press < >. As you watch the image orientation icon in the upper left of the screen, press < > to specify which side is up. Note Orientation information of video snapshot albums cannot be changed. Movies are played horizontally on the camera, regardless of the [ : Add rotate info] setting ( ).
Erasing Images Erasing a Single Image Selecting ([ ]) Multiple Images to Erase Together Specifying the Range of Images to Be Erased Erasing All Images in a Folder or on a Card You can either select and erase unnecessary images one by one or erase them in one batch. Protected images ( ) will not be erased. Caution Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them.
3. Erase the images. JPEG or RAW images or movies Select [Erase]. RAW+JPEG images Select an item.
Selecting ([ ]) Multiple Images to Erase Together By adding checkmarks to the images to be erased, you can erase all those images at once. 1. Select [ 2. Select [Select and erase images]. 3. Select an image. : Erase images]. Use the < >< press < >. > keys to select the image to be erased, then To select another image to be erased, repeat step 3.
4. Erase the image. Press the < > button, then press [OK].
Specifying the Range of Images to Be Erased While looking at the images in the index display, you can specify the first and last images for a range to erase all the specified images at once. 1. Select [Select range]. 2. Specify the range of images. Select the first image (start point). Next, select the last image (end point). 3. Press the < > button.
4. Erase the images. Select [OK].
Erasing All Images in a Folder or on a Card When [ : Erase images] is set to [All images in folder] or [All images on card], all the images in the folder or on the card will be erased. If the search conditions are set with [ : Set image search conditions] ( display will change to [All found images]. ), the • If you select [All found images], all the images filtered by the search conditions will be erased. Note To erase all the images including protected images, format the card ( 436 ).
Print Ordering (DPOF) Setting Print Options Selecting Images for Printing DPOF (Digital Print Order Format) enables you to print images recorded on the card according to your printing instructions such as the image selection, quantity to print, etc. You can print multiple images in one batch or create a print order for a photofinisher. You can set the print settings such as print type, date imprinting, file number imprinting, etc. The print settings will be applied to all the images specified for printing.
3. Set the options as desired. Set the [Print type], [Date], and [File No.]. Print type Date File No. 4. On Off On Off Standard Prints one image on one sheet. Index Multiple thumbnail images are printed on one sheet. Both Prints both the standard and index prints. [On] imprints the recorded date of the captured image. [On] imprints the file number. Exit the setting. Press the < > button. Next, select [Sel.Image] or [Multiple] to order the images to be printed.
Caution If you print an image with a large image size using the [Index] or [Both] setting ( ), the index print may not be printed with certain printers. In this case, resize the image ( ), then print the index print. Even if [Date] and [File No.] are set to [On], the date or file number may not be imprinted, depending on the print type setting and printer. With [Index] prints, the [Date] and [File No.] cannot both be set to [On] at the same time.
Selecting Images for Printing Sel.Image Select and specify the images one by one. Press the < > button to save the print order to the card. • Standard/Both (1) Quantity (2) Total images selected Press < > to print a copy of the displayed image. By turning the < can set a print quantity of up to 99 copies. > dial, you • Index (3) Checkmark (4) Index icon Press < > to add a checkmark [ index print. ] to the box.
Multiple • Select range Under [Multiple], select [Select range]. Selecting the first and last images of the range marks all the images in the range with a checkmark [ ], and one copy of each image will be specified for printing. • All images in a folder Select [Mark all in folder] and select the folder. A print order for one copy of all the images in the folder will be specified. If you select [Clear all in folder] and select the folder, the print order for all the images in the folder will be canceled.
Caution RAW images or movies cannot be specified for printing. Note that RAW images or movies will not be specified for printing even if you specify all images with [Multiple]. When using a PictBridge-compatible printer, do not specify more than 400 images for one print order. If you specify more than this, the images may not all be printed.
Photobook Set-up Specifying Images Individually Specifying the Image Range for a Photobook Specifying All Images in a Folder or Card You can specify up to 998 images for printing in a photobook. When you use EOS Utility (EOS software) to import images to a computer, the specified images for a photobook will be copied to a dedicated folder. This function is useful for ordering photobooks online. Specifying Images Individually 1. Select [ 2. Select [Select images]. : Photobook Set-up].
3. Select the image to be specified. Use the < >< > keys to select the image to be specified for a photobook, then press < >. To select other images to be specified for a photobook, repeat step 3.
Specifying the Image Range for a Photobook While looking at the images in the index display, you can specify the range (start point to end point) of images to be specified for a photobook at once. 1. Select [Multiple]. Under [ 2. : Photobook Set-up], select [Multiple]. Select [Select range].
3. Specify the range of images. Select the first image (start point). Next, select the last image (end point). A checkmark [ ] will be appended to all the images within the range between first and last images.
Specifying All Images in a Folder or Card You can specify all the images in a folder or on a card at once for a photobook. Under [ : Photobook Set-up], you can set [Multiple] to [All images in folder] or [All images on card] to specify all the images in the folder or on the card for a photobook. To cancel the selection, select [Clear all in folder] or [Clear all on card].
Creative Filters You can apply the following filter processing to an image and save it as a separate image: Grainy B/W, Soft focus, Fish-eye effect, Art bold effect, Water painting effect, Toy camera effect, and Miniature effect. 1. Select [ 2. Select an image. : Creative filters]. Use the < >< > keys to select an image, then press < You can press the < display. >.
3. Select a filter effect ( 4. Adjust the filter effect. ). Adjust the filter effect, then press < >. For [Miniature effect], turn the < > or < > dial to move the white frame enclosing the area to keep in sharper focus, then press >. < 5. Save the image. Select [OK]. Check the destination folder and image file number, then select [OK]. To apply filter processing to other images, repeat steps 2–5.
Note For images captured in RAW+JPEG shooting, filter processing is applied to the RAW image, and the results are saved as a JPEG. For RAW images captured at a specific aspect ratio, the resulting image is saved at that aspect ratio after filter processing. Images processed using the fish-eye effect filter will not have Dust Delete Data ( ) appended.
Creative Filter Characteristics Grainy B/W Makes the image grainy and black and white. By adjusting the contrast, you can change the black-and-white effect. Soft focus Gives the image a soft look. By adjusting the blur, you can change the degree of softness. Fish-eye effect Gives the effect of a fish-eye lens. The image will have barrel distortion. Depending on the level of this filter effect, the area trimmed along the periphery of the image changes.
RAW Image Processing Magnified View Processing Images with Specified Aspect Ratios RAW Image Processing Options You can process or images with the camera to create JPEG images. RAW images are not affected, so different conditions can be applied to create JPEGs. You can also use Digital Photo Professional (EOS software) to process RAW images. 1. Select [ : RAW image processing].
2. Select an item, then select images. You can select multiple images to process at once. Selecting images Use the < < >. Press the < >< > keys to select images to process, then press > button.
Selecting range Select the first image (start point). Next, select the last image (end point). Press the < > button.
3. Set the desired processing conditions. Use shot settings Images are processed using image settings at the time of capture. Customize RAW processing Select an item with the < Turn the < Press < > or < >< >< >< > keys. > dial to switch the setting. > to access the function setting screen. To return to the image settings at the time of shooting, press the < button.
4. Save the image. When using [Customize RAW processing], select [ ] (Save). Read the message and select [OK]. To process other images, select [Yes] and repeat steps 2–4. 5. Select the image to display. Select [Original image] or [Processed img.].
Magnified View You can magnify images displayed for [Customize RAW processing] by pressing the < > button. Magnification varies depending on the [Image quality] setting. With the < < >< >< > keys, you can scroll around the magnified image. To cancel the magnified view, tap [ ] or press the < > button. > Processing Images with Specified Aspect Ratios JPEG images at the specified aspect ratio are created when you process RAW images shot with [ : Still img aspect ratio] ( ) set to an option other than [3:2].
RAW Image Processing Options Brightness adjustment You can adjust the image brightness up to ±1 stop in 1/3-stop increments. White balance ( ) You can select the white balance. If you select [ priority] or [Auto: White priority]. If you select [ temperature. Picture Style ( ], you can select [Auto: Ambience ], you can set the color ) You can select the Picture Style. You can adjust the sharpness, contrast, and other parameters. Auto Lighting Optimizer ( ) You can set the Auto Lighting Optimizer.
Lens aberr correction • Peripheral illum corr ( ) A phenomenon that makes the image corners look darker due to the lens characteristics can be corrected. If [Enable] is set, the corrected image will be displayed. If the effect is difficult to discern, magnify the image ( ) and check the four corners. The peripheral illumination correction applied with the camera will be less pronounced than that applied with the Digital Photo Professional (EOS software) at maximum correction amount.
Caution Processing RAW images in the camera will not produce exactly the same results as processing RAW images with Digital Photo Professional (EOS software). If you perform [Brightness adjustment], noise, banding, etc. may be intensified with the effects of adjustment. When [Digital Lens Optimizer] is set, noise may be intensified together with the effects of correction. Image edges may also be emphasized. Adjust Picture Style sharpness or set [Digital Lens Optimizer] to [Disable], as needed.
Creative Assist You can process RAW images by applying your preferred effects and saving as JPEGs. 1. Select [ 2. Select an image. : Creative Assist]. Use the < < >.
3. Select an effect. Use the < >< > keys to select the effect. By selecting [Preset] and pressing < >, you can choose [VIVID], [SOFT], or other preset effects. [AUTO1], [AUTO2], and [AUTO3] are effects recommended by the camera based on image conditions. You can select effects such as [Brightness] or [Contrast] by pressing < > and then using the < >< > keys. Press < > when adjustment is finished.
To reset the effect, press the < To confirm the effect, press the < 4. Select [OK] to save the image. 463 > button. > button.
Quick Control RAW Processing You can select the type of RAW image processing performed from the Quick Control screen. 1. Select [ 2. Select an item. : Quick Control RAW processing]. Creative Assist RAW processing that applies your preferred effect ( ). RAW image processing RAW processing according to conditions you specify ( 464 ).
Red-Eye Correction Automatically corrects relevant portions of images affected by red-eye. The image can be saved as a separate file. 1. Select [ 2. Select an image with the < : Red-eye correction]. >< After image selection, either tap [ > keys. ] or press < >. White frames are displayed around corrected image areas.
3. Select [OK]. The image is saved as a separate file. Caution Some images may not be corrected accurately.
Creating Albums 1. Select [ 2. Select an album to edit. : Create album]. Press < > to add a checkmark [ After selection, press the < 467 ]. > button.
3. Select an editing option. Option Description Rearrange video snapshots >< Use the < move, then press < move it, then press < Use the < Remove video snapshot labeled [ < Play video snapshot 4. >< delete, then press < > keys to select a video snapshot to >. Use the < >< > keys to >. > keys to select a video snapshot to >. Selected video snapshots are ]. To clear the selection and remove [ Use the < >< play, then press < adjust the volume. > keys to select a video snapshot to >.
5. Save the image. To play an album with background music, use [Background music] to select the music ( ). To check your editing, select [Preview]. Selecting [Save] saves the edited album as a new album. Caution Video snapshot albums can only be edited once.
Selecting Background Music Albums and slideshows can be played with background music once you copy the music to the card, using EOS Utility (EOS software). 1. Select [Background music]. Set [Background music] to [On]. 2. Select the background music. Use the < > < > keys to select the music, then press < [Slide show], you can select multiple tracks. 3. >. For Listen to a sample. To listen to a sample, press the < > button. Use the < > < > keys to adjust the volume.
Cropping You can crop a captured JPEG image and save it as another image. Cropping an image is possible only with JPEG images. Images shot in RAW cannot be cropped. 1. Select [ 2. Select an image. : Cropping]. Use the < >< > keys to select the image to crop.
3. Set the cropping frame. Press < > to display the cropping frame. The image area within the cropping frame will be cropped. Resizing the cropping frame size Use the < > or < > button to resize the cropping frame. The smaller the cropping frame, the more magnified the cropped image will look. Changing the cropping frame aspect ratio and orientation Use the < > dial to select < cropping frame's aspect ratio. >.
4. Check the image area to be cropped. Use the < > dial to select < >. The image area to crop is displayed. 5. Save the image. Use the < > dial to select < >. Select [OK] to save the cropped image. Check the destination folder and image file number, then select [OK]. To crop another image, repeat steps 2 to 5. Caution The position and size of the cropping frame may change depending on the angle set for tilt correction. Once a cropped image is saved, it cannot be cropped again or resized.
Resizing You can resize a JPEG image to make the pixel count lower and save it as a new image. Resizing an image is possible only with JPEG / / images. JPEG and RAW images cannot be resized. 1. Select [ 2. Select an image. : Resize]. Use the < >< > keys to select the image to resize.
3. Select the desired image size. Press < > to display the image sizes. Select the desired image size (1). 4. Save the image. Select [OK] to save the resized image. Check the destination folder and image file number, then select [OK]. To resize another image, repeat steps 2 to 4. Note For details on image sizes of resized images, see Still photo pixel count.
Rating Images Rating a Single Image Rating by Specifying the Range Rating All Images in a Folder or on a Card You can rate images on a scale of 1–5 ( / / * Rating images can help you organize them. Rating a Single Image 1. Select [ 2. Select [Select images]. : Rating]. 476 / / ). This function is called rating.
3. Select the image to be rated. Use the < 4. >< > keys to select the image to rate. Rate the image. Press < >, and a blue highlight frame will appear as shown in the screen shown above. Use the < > < > keys to select a rating mark, then press < >. When you append a rating mark to the image, the number beside the set rating will increase by one. To rate another image, repeat steps 3 and 4.
Rating by Specifying the Range While looking at the images in the index display, you can specify the first and last images for a range to rate all the specified images at once. 1. Select [Select range]. 2. Specify the range of images. Select the first image (start point). Next, select the last image (end point). A checkmark [ ] will be appended to all the images within the range between first and last images. 3. Press the < > button.
4. Rate the images. Turn the < > dial to select a rating mark, then select [OK]. All the images in the specified range will be rated (same rating) at once.
Rating All Images in a Folder or on a Card You can rate all the images in a folder or on a card at once. Under [ : Rating], when you select [All images in folder] or [All images on card], all the images in the folder or on the card will be rated. Turn the < > dial to select a rating mark, then select [OK]. When you are not rating images or canceling the rating, select [ ]. If the search conditions are set with [ : Set image search conditions] ( display will change to [All found images].
Note Values next to ratings are displayed as [###] if more than 1,000 images have that rating. With [ : Set image search conditions] and [ : Image jump w/ ], you can display only the images given a specific rating.
Slide Show You can play back the images on the card as an automatic slide show. 1. Specify the images to be played back. To play back all the images on the card, go to step 2. If you want to specify the images to be played back in the slide show, filter the images with [ : Set image search conditions] ( ). 2. Select [ : Slide show].
3. Set the playback as desired. Select [Set up]. Set the [Display time], [Repeat] (repeated playback), and [Transition effect] (effect when changing images) for the still photos. To play background music, use [Background music] to select the music ( ). After completing the settings, press the < Display time Repeat 483 > button.
Transition effect Background music 4. Start the slide show. Select [Start]. After [Loading image...] is displayed, the slide show will start. 5. Exit the slide show. To exit the slide show and return to the setting screen, press the < > button.
Note To pause the slide show, press < >. During pause, [ ] will be displayed in the upper left of the screen. Press < > again to resume the slide show. During the automatic playback of still photos, you can press the < > button to switch the display format ( ). During movie playback, you can adjust the sound volume by using the < > < > keys. During auto playback or when playback is paused, you can press the < >< > keys to view another image. During auto playback, auto power off will not take effect.
Setting Image Search Conditions You can filter image display according to your search conditions. After setting the image search conditions, you can play back and display only the found images. You can also protect, rate, play a slide show, erase, and apply other operations to filtered images. 1. Select [ : Set image search conditions].
2. Set the search conditions. Use the < >< Set with the < > keys to select an option. >< > keys or the < > button. A checkmark [ ] (1) is appended to the left of the item. (Specified as the search condition.) If you select the item and press the < > button, the checkmark [ ] will be removed (which cancels the search condition.) Item Displays images with the selected (rating) condition. Date Displays images taken on the selected shooting date. Folder 3.
4. Display the found images. Press the < > button. Only the images that match the set conditions (filtered) will be played back. When the images are filtered for display, the screen will have an outer yellow frame (2). Clearing the Search Conditions Access the screen in step 2, then press the < > button to clear all the search conditions. Caution If no images match the search conditions, < > cannot be pressed in step 3.
Browsing Images with the Main Dial In single-image display, you can turn the < backward according to the jump method set. 1. Select [ 2. Select the jump method. > dial to jump through the images forward or : Image jump w/ ]. Note With [Jump images by the specified number], you can turn the < > dial to select the number of images to jump by. When you select [Display by image rating], turn the < > dial to specify the rating ( ).
3. Browse by jumping. (1) Jump method (2) Playback position Press the < > button. In single-image display, turn the < You can browse by the set method. > dial. Note To search images by shooting date, select [ : Display by date]. To search images by folder, select [ : Display by folder]. To display either movies or still photos for cards that contain both, select [ Display movies only] or [ : Display stills only].
Histogram The brightness histogram shows the exposure level distribution and overall brightness. The RGB histogram is for checking the color saturation and gradation. 1. Select [ 2. Select an item. : Histogram disp].
[Brightness] display This histogram is a graph showing the distribution of the image's brightness level. The horizontal axis indicates the brightness level (darker on the left and brighter on the right) while the vertical axis indicates how many pixels exist for each brightness level. The more pixels there are toward the left, the darker the image. The more pixels there are toward the right, the brighter the image. If there are too many pixels on the left, the shadow detail will be lost.
[RGB] display This histogram is a graph showing the distribution of each primary color's brightness level in the image (RGB or red, green, and blue). The horizontal axis indicates the color's brightness level (darker on the left and brighter on the right), while the vertical axis indicates how many pixels exist for each color brightness level. The more pixels there are toward the left, the darker and less prominent the color. The more pixels there are toward the right, the brighter and denser the color.
AF Point Display You can display the AF points that were used to focus, which will be outlined in red on the playback screen. If automatic AF point selection is set, multiple AF points may be displayed. 1. Select [ 2. Select [Enable]. : AF point disp.].
Resuming from Previous Playback 1. Select [ 2. Select an item. : View from last seen]. [Enable]: Playback resumes from the last image displayed (except when you have just finished shooting). [Disable]: Playback resumes from your most recent shot whenever the camera is restarted.
HDMI HDR Output You can view RAW images in HDR by connecting the camera to an HDR TV. 1. Select [ 2. Select [On]. : HDMI HDR output]. Caution Image operations such as RAW processing are not available during HDR display. Note Make sure the HDR TV is set up for HDR input. For details on how to switch inputs on the TV, refer to the TV instruction manual. Depending on the TV used, images may not look as expected. Some image effects and information may not be displayed on an HDR TV.
Wireless Features This chapter describes how to connect the camera to a smartphone wirelessly via Bluetooth® or Wi-Fi® and send images to devices or Web services, how to control the camera from a computer or wireless remote control, and other operations. Caution Important Note that Canon cannot be held liable for any loss or damage from erroneous wireless communication settings when using the camera. In addition, Canon cannot be held liable for any other loss or damage caused by use of the camera.
Tab Menus: Wireless Settings Wireless Settings 1 (1) Wi-Fi/Bluetooth connection (2) Airplane mode (3) Wi-Fi settings (4) Bluetooth settings (5) Nickname (6) GPS device settings Wireless Settings 2 (1) Clear wireless settings 498
Caution Wireless communication is not available while the camera is connected via an interface cable to a computer or other device. Other devices, such as computers, cannot be used with the camera by connecting them with an interface cable while the camera is connected to devices via Wi-Fi. The camera cannot be connected via Wi-Fi if there is no card in the camera (except for [ ]). Also, for [ ] and Web services, the camera cannot be connected via Wi-Fi if there are no images saved on the card.
Wi-Fi/Bluetooth Connection 1. Select [ 2. Select an item for the camera to connect to. : Wi-Fi/Bluetooth connection]. Connecting to a Smartphone ( ) Control the camera remotely and browse images on the camera over a Wi-Fi connection by using the dedicated Camera Connect app on smartphones or tablets (collectively referred to as “smartphones” in this manual).
Sending images to a Web service ( ) Send images directly from the camera to the image.canon cloud service for Canon customers after you complete member registration (free of charge). Original files of images sent to image.canon are retained for 30 days, without storage limitations, and can be downloaded to computers or transferred to other Web services.
Connecting to a Smartphone Turning on Bluetooth and Wi-Fi on a Smartphone Installing Camera Connect on a Smartphone Connecting to a Bluetooth-compatible Smartphone via Wi-Fi Camera Connect Functions Maintaining a Wi-Fi Connection When the Camera Is Off Canceling the Pairing Wi-Fi Connection Without Using Bluetooth Automatic Image Transfer as You Shoot Sending Images to a Smartphone from the Camera Terminating Wi-Fi Connections Settings to Make Images Viewable from Smartphones You can do the following after
Turning on Bluetooth and Wi-Fi on a Smartphone Turn on Bluetooth and Wi-Fi from the smartphone settings screen. Note that pairing with the camera is not possible from the smartphone's Bluetooth settings screen. Note To establish a Wi-Fi connection via an access point, see Wi-Fi Connection via Access Points.
Installing Camera Connect on a Smartphone The dedicated app Camera Connect (free of charge) must be installed on the smartphone on which Android or iOS is installed. Use the latest version of the smartphone OS. Camera Connect can be installed from Google Play or App Store. Google Play or App Store can also be accessed using the QR codes that appear when the camera is paired or connected via Wi-Fi to a smartphone.
Connecting to a Bluetooth-compatible Smartphone via Wi-Fi Steps on the camera (1) 1. Select [ 2. Select [ 3. Select [Add a device to connect to]. : Wi-Fi/Bluetooth connection]. Connect to smartphone].
4. Select an item. If Camera Connect is already installed, select [Do not display]. If Camera Connect is not installed, select [Android] or [iOS], scan the displayed QR code with the smartphone to access Google Play or App Store, and install Camera Connect.
5. Select [Pair via Bluetooth]. Pairing now begins. Select [OK]. To pair with a different smartphone after pairing with one initially, select [OK] on the screen shown above.
Steps on the smartphone (1) 6. Start Camera Connect. 7. Tap the camera for pairing. If you are using an Android smartphone, go to step 9. 8. Tap [Pair] (iOS only).
Steps on the camera (2) 9. 10. Select [OK]. Press < >. Pairing is now complete, and the camera is connected to the smartphone via Bluetooth. A Bluetooth icon appears on the main Camera Connect screen.
Caution The camera cannot be connected to two or more devices at the same time via Bluetooth. To switch to a different smartphone for the Bluetooth connection, see Changing or Deleting Connection Settings. Bluetooth connection consumes battery power even after the camera's auto power off is activated. Therefore, the battery level may be low when you use the camera. Troubleshooting pairing Keeping pairing records for previously paired cameras on your smartphone will prevent it from pairing with this camera.
Steps on the smartphone (2) 11. Tap a Camera Connect function. In iOS, tap [Join] when a message is displayed to confirm camera connection. For the Camera Connect functions, see Camera Connect Functions. When a Wi-Fi connection is established, the screen for the selected function will appear. [ Wi-Fi on] is displayed on the camera. The Bluetooth and Wi-Fi icons are lit on the main Camera Connect screen. The Wi-Fi connection to a Bluetooth-compatible smartphone is now complete.
[ Wi-Fi on] screen Disconnect,exit Terminates the Wi-Fi connection. Confirm set. You can check the settings. Error details When a Wi-Fi connection error occurs, you can check the details of the error.
Camera Connect Functions Images on camera Images can be browsed, deleted, or rated. Images can be saved on a smartphone. Effects can be applied to RAW images from a smartphone (Creative Assist). Remote live view shooting Enables remote shooting as you view a live image on the smartphone. Auto transfer Enables camera and app setting adjustment for automatic transfer of your shots ( ). Bluetooth remote controller Enables remote control of the camera from a smartphone paired via Bluetooth.
Maintaining a Wi-Fi Connection When the Camera Is Off Even when the camera power switch is set to < >, as long as it is paired to a smartphone via Bluetooth, you can use the smartphone to connect via Wi-Fi and browse images on the camera or perform other operations. If you prefer not to connect via Wi-Fi to the camera when it is off, either set [Airplane mode] to [On] or set [Bluetooth settings] to [Disable].
Canceling the Pairing Cancel pairing with a smartphone as follows. 1. Select [ 2. Select [ : Wi-Fi/Bluetooth connection]. Connect to smartphone]. If the history ( < > keys. 3. ) is displayed, switch the screen with the < Select [Edit/delete device].
4. Select the smartphone to cancel pairing with. Smartphones currently paired with the camera are labeled [ ]. 5. Select [Delete connection information]. 6. Select [OK]. 7. Clear the camera information on the smartphone. In the smartphone's Bluetooth setting menu, clear the camera information registered on the smartphone.
Wi-Fi Connection Without Using Bluetooth Steps on the camera (1) 1. Select [ 2. Select [ : Wi-Fi/Bluetooth connection]. Connect to smartphone]. If the history ( keys. 3. ) is displayed, switch the screen with the < Select [Add a device to connect to].
4. Select an item. If Camera Connect is already installed, select [Do not display]. 5. Select [Connect via Wi-Fi].
6. Check the SSID (network name) and password. Check the SSID (1) and Password (2) displayed on the camera screen. In [Wi-Fi settings], if you set [Password] to [None], the password will not be displayed or required ( ). Note By selecting [Switch network] in step 6, you can establish a Wi-Fi connection via an access point ( ).
Steps on the smartphone 7. Operate the smartphone to establish a Wi-Fi connection. Smartphone's screen (sample) Activate the smartphone's Wi-Fi function, then tap the SSID (network name) checked in step 6 in Steps on the camera (1). For the password, enter the password checked in step 6 in Steps on the camera (1). 8. Start Camera Connect and tap the camera to connect to via Wi-Fi.
Steps on the camera (2) 9. Select [OK]. To specify viewable images, press the < > button. Configure as described in Settings to Make Images Viewable from Smartphones, starting in step 5. The main window of Camera Connect will be displayed on the smartphone. The Wi-Fi connection to a smartphone is now complete. Operate the camera using Camera Connect ( ). For how to terminate the Wi-Fi connection, see Terminating Wi-Fi Connections. To reconnect via Wi-Fi, see Reconnecting via Wi-Fi.
Automatic Image Transfer as You Shoot Your shots can be automatically sent to a smartphone. Before following these steps, make sure the camera and smartphone are connected via Wi-Fi. 1. Select [ 2. Select [Send to smartphone after shot]. 3. In [Auto send], select [Enable]. : Wi-Fi settings].
4. Set [Size to send]. 5. Take the picture.
Sending Images to a Smartphone from the Camera You can use the camera to send images to a smartphone paired via Bluetooth (Android devices only) or connected via Wi-Fi. 1. Switch to playback. 2. Press the < 3. Select [ > button. Send images to smartphone]. If you perform this step while connected via Bluetooth, a message is displayed, and the connection switches to a Wi-Fi connection. 4. Select sending options and send the images.
(1) Sending images individually 1. Select an image to send. Use the < >< then press < >. > keys or < You can press the < display. 2. > dial to select an image to send, > button to select the image using the index Select [Send img shown]. In [Size to send], you can select the image sending size. When sending movies, you can select the image quality of movies to send in [Quality to send].
(2) Sending multiple selected images 1. Press < 2. Select [Send selected]. >.
3. Select images to send. Use the < >< then press < >. > keys or < > dial to select images to send, You can press the < > button to select the images from 3-image display. To return to the single-image display, press the < > button. After selecting the images to send, press the < 527 > button.
4. Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. 5. Select [Send].
(3) Sending a specified range of images 1. Press < 2. Select [Send range]. 3. Specify the range of images. >. Select the first image (start point). Select the last image (end point). To cancel the selection, repeat this step. You can press the < > button to change the number of images shown in the index display.
4. Confirm the range. Press the < 5. > button. Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. 6. Select [Send].
(4) Sending all images on the card 1. Press < 2. Select [Send all card]. >.
3. Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. 4. Select [Send].
(5) Sending images that match the search conditions Send all the images that match the search conditions set in [Set image search conditions] at once. For [Set image search conditions], refer to Setting Image Search Conditions. 1. Press < 2. Select [Send all found]. >.
3. Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. 4. Select [Send].
Ending image transfer Sending images from the camera when paired via Bluetooth (Android) Press the < > button on the image transfer screen. Select [OK] to end image transfer and the Wi-Fi connection. Sending images from the camera over a Wi-Fi connection Press the < > button on the image transfer screen. To terminate the Wi-Fi connection, see Terminating Wi-Fi Connections. Caution During the image transfer operation, a picture cannot be taken even if the camera's shutter button is pressed.
Note You can cancel the image transfer by selecting [Cancel] during the transfer. You can select up to 999 files at a time. With a Wi-Fi connection established, disabling the smartphone's power saving function is recommended. Selecting the reduced size for still photos applies to all still photos sent at that time. Note that size still photos are not reduced. Selecting compression for movies applies to all movies sent at that time. Note that or the camera does not reduce movies with a frame rate of .
Terminating Wi-Fi Connections Perform either of the following operations. On the Camera Connect screen, tap [ ]. On the [ Wi-Fi on] screen, select [Disconnect,exit]. If the [ Wi-Fi on] screen is not displayed, select [ : Wi-Fi/Bluetooth connection]. Select [Disconnect,exit], then select [OK] on the confirmation screen.
Settings to Make Images Viewable from Smartphones Images can be specified after the Wi-Fi connection is terminated. 1. Select [ 2. Select [ : Wi-Fi/Bluetooth connection]. Connect to smartphone]. If the history ( keys. 3. ) is displayed, switch the screen with the < Select [Edit/delete device].
4. Select a smartphone. Select the name of the smartphone on which you want to make the images viewable. 5. Select [Viewable imgs].
6. Select an item. Select [OK] to access the setting screen. [All images] All images stored on the card become viewable. [Images from past days] Specify viewable images on the shooting-date basis. Images shot up to nine days ago can be specified. When [Images shot in past days] is selected, images shot up to the specified number of days before the current date become viewable. Use the < > < > keys to specify the number of days, then press < > to confirm the selection.
[Select by rating] Specify viewable images depending on whether a rating is appended (or not appended) or by the type of rating. Once you select the type of rating, the viewable images are set. [File number range] (Select range) Select the first and last images from images arranged by the file number to specify the viewable images. 1.Press < > to display the image selection screen. Use the < > < > keys or < > dial to select images. You can press the < > button to select the images using the index display.
Caution Movie recording continues if the camera is disconnected from Wi-Fi during remote movie recording. With a Wi-Fi connection to a smartphone established, certain functions are unavailable. In remote shooting, the AF speed may become slower. Depending on the communication status, image display or shutter release timing may be delayed. When saving images to a smartphone, you cannot take a picture even if you press the camera's shutter button. Also, the camera screen may turn off.
Connecting to a Computer via Wi-Fi Operating the Camera Using EOS Utility Sending Images on the Camera Automatically This section describes how to connect the camera to a computer via Wi-Fi and perform camera operations using EOS software or other dedicated software. Install the latest version of software on the computer before setting up a Wi-Fi connection. For computer operating instructions, refer to the computer user manual.
2. Select [ Remote control (EOS Utility)]. If the history ( keys. ) is displayed, switch the screen with the < 3. Select [Add a device to connect to]. 4. Check the SSID (network name) and password. >< > Check the SSID (1) and Password (2) displayed on the camera screen. In [Wi-Fi settings], if you set [Password] to [None], the password will not be displayed or required. For details, see Wi-Fi Settings.
Steps on the computer (1) 5. Select the SSID, then enter the password. Computer's screen (sample) On the computer's network setting screen, select the SSID checked in step 4 in Steps on the camera (1). For the password, enter the password checked in step 4 in Steps on the camera (1).
Steps on the camera (2) 6. Select [OK]. The following message is displayed. “******” represents the last six digits of the MAC address of the camera to be connected.
Steps on the computer (2) 7. Start EOS Utility. 8. In EOS Utility, click [Pairing over Wi-Fi/LAN]. If a firewall-related message is displayed, select [Yes]. 9. Click [Connect]. Select the camera to connect to, then click [Connect].
Steps on the camera (3) 10. Establish a Wi-Fi connection. Select [OK].
[ Wi-Fi on] screen Disconnect,exit Terminates the Wi-Fi connection. Confirm set. You can check the settings. Error details When a Wi-Fi connection error occurs, you can check the details of the error. The Wi-Fi connection to a computer is now complete. Operate the camera using EOS Utility on the computer. To reconnect via Wi-Fi, see Reconnecting via Wi-Fi. Caution If the Wi-Fi connection is terminated while recording a movie with remote shooting, the following will occur.
Sending Images on the Camera Automatically With the dedicated software Image Transfer Utility 2, you can send images on the camera to a computer automatically. Steps on the computer (1) 1. Connect the computer and access point and start Image Transfer Utility 2. The screen to set up pairing is shown when you follow the instructions displayed the first time Image Transfer Utility 2 starts up. Steps on the camera (1) 2. Select [Auto send images to computer]. Select [ : Wi-Fi settings].
4. Select [OK]. 5. Connect to an access point via Wi-Fi. Establish a Wi-Fi connection between the camera and the access point connected to the computer. For connection instructions, see Wi-Fi Connection via Access Points. 6. Select the computer to pair the camera with.
Steps on the computer (2) 7. Pair the camera and computer. Select the camera, then click [Pairing]. Steps on the camera (2) 8. Select [Auto send images to computer]. Select [ : Wi-Fi settings]. Select [Auto send images to computer]. 9. Select [Image sending options].
10. Select what to send. If you select [Selected imgs] in [Range to send], specify the images to send on the [Select images to send] screen. After the settings are complete, turn the camera off. Images on the camera are automatically sent to the active computer when you turn the camera on within range of the access point. Caution If images are not sent automatically, try restarting the camera.
Connecting to a Printer via Wi-Fi Image Printing Print Settings This section describes how to print images by directly connecting the camera to a printer supporting PictBridge (Wireless LAN) via Wi-Fi. For printer operating instructions, refer to the printer user manual. 1. Select [ : Wi-Fi/Bluetooth connection]. 2. Select [ Print from Wi-Fi printer]. If the history ( keys.
3. Select [Add a device to connect to]. 4. Check the SSID (network name) and password. Check the SSID (1) and Password (2) displayed on the camera screen. In [Wi-Fi settings], if you set [Password] to [None], the password will not be displayed or required ( ). 5. Set up the printer. In the Wi-Fi settings menu of the printer to be used, select the SSID you have checked. For the password, enter the password checked in step 4.
6. Select the printer. In the list of detected printers, select the printer to connect to via Wi-Fi. If your preferred printer is not listed, selecting [Search again] may enable the camera to find and display it. Note To establish a Wi-Fi connection via an access point, see Wi-Fi Connection via Access Points.
Image Printing Printing images individually 1. Select the image to be printed. Use the < >< >. then press < > keys or < You can press the < display. 2. > dial to select an image to print, > button to select the image using the index Select [Print image].
3. Print the image. For the print setting procedures, see Print Settings. Select [Print], then [OK] to start printing.
Printing according to specified image options 1. Press < 2. Select [Print order]. 3. Set the printing options. >. For the print setting procedures, see Print Ordering (DPOF). If the print order is complete before establishing a Wi-Fi connection, go to step 4.
4. Select [Print]. [Print] can be selected only when an image is selected and the printer is ready to print. 5. Set the [Paper settings] ( 6. Print the image. ). When [OK] is selected, printing starts. Caution Shooting is not possible while connected to a printer via Wi-Fi. Movies cannot be printed. Before printing, be sure to set the paper size. Certain printers may not be able to imprint the file number. If [Bordered] is set, certain printers may imprint the date on the border.
Note When you use a battery to power the camera, make sure it is fully charged. Depending on the image's file size and image quality, it may take some time to start printing after you select [Print]. To stop printing, press < > while [Cancel] is displayed, then select [OK]. When printing with [Print order], if you stopped printing and want to resume printing of the remaining images, select [Resume]. Note that printing will not resume if any of the following occurs.
Print Settings The screen display and setting options vary depending on the printer. Also, certain settings may not be available. For details, refer to the printer's instruction manual. Print settings screen (1) Sets date or file number printing ( (2) Sets the printing effects ( ). (3) Sets the number of copies to print ( (4) Sets the print area ( (5) Sets the paper size, type, and layout ( (6) Returns to the image selection screen. (7) Starts the printing.
Paper settings Select [Paper settings]. [ ] Setting the paper size Select the size of the paper in the printer.
[ ] Setting the paper type Select the type of the paper in the printer. [ ] Setting the page layout Select the page layout. Caution If the image's aspect ratio is different from the printing paper's aspect ratio, the image may be cropped significantly when you print it as a borderless print. Images may also be printed at lower resolution. [ ] Setting printing of the date/file number Select [ ]. Select what to print.
[ ] Setting the printing effects (Image optimization) Select [ ]. Select printing effects. Caution If you imprint shooting information on an image shot at an expanded ISO speed (H), the correct ISO speed may not be imprinted. The [Default] setting for printing effects and other options are the printer's own default settings as set by the printer's manufacturer. Refer to the printer's instruction manual to find out what the [Default] settings are. [ ] Setting the number of copies Select [ ].
Cropping the image Set cropping immediately before printing. Changing other print settings after you crop images may require you to crop the images again. 1. On the print setting screen, select [Cropping]. 2. Set the cropping frame size, position, and aspect ratio. The image area within the cropping frame will be printed. The shape of the frame (aspect ratio) can be changed with [Paper settings]. Resizing the cropping frame size Use the < > or < > button to resize the cropping frame.
Caution Depending on the printer, the cropped image area may not be printed as you specified. The smaller the cropping frame, the lower the resolution at which images are printed. Note Handling printer errors If printing does not resume after you resolve a printer error (no ink, no paper, etc.) and select [Continue], operate the buttons on the printer. For details on resuming printing, refer to the printer's instruction manual.
Sending Images to a Web Service Registering image.canon Sending Images This section describes how to send images to image.canon. Registering image.canon Link the camera to image.canon to send images directly from the camera. A computer or smartphone with a browser and internet connection is required. You will need to enter an email address used on your computer or smartphone. For instructions on using image.canon services and details on countries and regions of availability, visit the site (https://image.
3. Select [I Agree]. 4. Establish a Wi-Fi connection. Connect to an access point via Wi-Fi. Go to step 6 in Wi-Fi Connection via Access Points. 5. Enter your email address. Enter your email address, then select [OK].
6. Enter a four-digit number. Enter a four-digit number of your choice, then select [OK]. 7. Select [OK]. The [ ] icon changes to [ 570 ].
Steps on the computer or smartphone 8. Set up camera web link. Access the page in the notification message. Follow the instructions to complete the settings on the camera web link settings page.
Steps on the camera (2) 9. Add “image.canon” as a destination. Select [ ]. image.canon is now added.
Sending Images Images can be sent to image.canon. Original files of images sent to image.canon are retained for 30 days, without storage limitations, and can be downloaded to computers or transferred to other Web services. Connecting to image.canon via Wi-Fi 1. Select [ 2. Select image.canon. : Wi-Fi/Bluetooth connection]. If the history ( keys.
Sending images individually 1. Select an image to send. Use the < >< then press < >. > keys or < You can press the < display. 2. > dial to select an image to send, > button to select the image using the index Select [Send img shown]. In [Size to send], you can select the image sending size. On the screen after images are sent, select [OK] to end the Wi-Fi connection.
Sending multiple selected images 1. Press < 2. Select [Send selected]. 3. Select images to send. >. Use the < >< then press < >. > keys or < > dial to select an image to send, You can press the < > button to select the image from 3-image display. To return to the single-image display, press the < > button. After selecting the images to send, press the < 575 > button.
4. Select [Size to send]. On the displayed screen, select an image size. 5. Select [Send]. On the screen after images are sent, select [OK] to end the Wi-Fi connection.
Sending a specified range of images Specify the range of images to send all the images in the range at once. 1. Press < 2. Select [Send range]. 3. Specify the range of images. >. Select the first image (start point). Select the last image (end point). Images will be selected and [ ] will appear. To cancel the selection, repeat this step. You can press the < > button to change the number of images shown in the index display.
4. Confirm the range. Press the < 5. > button. Select [Size to send]. On the displayed screen, select an image size. 6. Select [Send]. On the screen after images are sent, select [OK] to end the Wi-Fi connection.
Sending all images on the card 1. Press < 2. Select [Send all card]. >.
3. Select [Size to send]. On the displayed screen, select an image size. 4. Select [Send]. On the screen after images are sent, select [OK] to end the Wi-Fi connection.
Sending images that match the search conditions Send all the images that match the search conditions set in [Set image search conditions] at once. For [Set image search conditions], refer to Setting Image Search Conditions. 1. Press < 2. Select [Send all found]. >.
3. Select [Size to send]. On the displayed screen, select an image size. 4. Select [Send]. On the screen after images are sent, select [OK] to end the Wi-Fi connection. Caution Shooting is not possible when connected via Wi-Fi to image.canon, even if you press the camera's shutter button.
Note Certain images may not be able to be sent with [Send range], [Send all card], or [Send all found]. When you reduce the image size, all images to be sent at the same time are resized. Note that movies or size still photos are not reduced. [Reduced] is enabled only for still photos shot with cameras of the same model as this camera. Still photos shot with other models are sent without resizing. A record of sent images can be checked when you access image.canon.
Wi-Fi Connection via Access Points Camera Access Point Mode Manual IP Address Setup This section describes how to join a Wi-Fi network via an access point compatible with WPS (PBC mode). First, check the position of the WPS button and how long to press it. It may take approx. one minute to establish a Wi-Fi connection. 1. Select [ 2. Select an item. : Wi-Fi/Bluetooth connection]. If the history ( keys.
3. Select [Add a device to connect to]. The following message is displayed if you have selected [ Connect to smartphone]. If Camera Connect is already installed, select [Do not display]. On the [Connect to smartphone] screen displayed next, select [Connect via Wi-Fi]. 4. Select [Switch network]. Displayed when [ ], [ ], or [ 585 ] is selected.
5. Select [Connect with WPS]. Note For [Camera access point mode] displayed in step 5, see Camera Access Point Mode. 6. Select [WPS (PBC mode)]. Select [OK].
7. Connect to the access point via Wi-Fi. Press the access point's WPS button. Select [OK]. 8. Select [Auto setting]. Select [OK] to access the setting screen for the Wi-Fi function. If an error occurs with [Auto setting], see Manual IP Address Setup.
9. Specify the settings for the Wi-Fi function. [ Connect to smartphone] On the smartphone's Wi-Fi setting screen, tap the SSID (network name) shown on the camera, then enter the password of the access point for the connection. Go to step 8 in Wi-Fi Connection Without Using Bluetooth. [ Remote control (EOS Utility)] Go to step 7 or 8 in Steps on the computer (2). [ Print from Wi-Fi printer] Go to step 6 in Connecting to a Printer via Wi-Fi. Registering image.canon Go to step 5 in Registering image.
Camera Access Point Mode Camera access point mode is a connection mode for connecting the camera directly to each device via Wi-Fi. Displayed when [ ], [ ], or [ ] is selected after [ : Wi-Fi/Bluetooth connection].
Manual IP Address Setup The items displayed vary depending on the Wi-Fi function. 1. Select [Manual setting]. Select [OK]. 2. Select an item. Select an item to access the screen for numerical input. To use a gateway, select [Enable], then select [Address].
3. Enter the desired values. Turn the < > dial to move the input position in the upper area, and use the < >< > keys to select numbers to enter. Press < > to enter the selected number. To set the entered numbers and return to the screen for step 2, press the < > button. 4. Select [OK]. When you have completed setting the necessary items, select [OK]. If you are not sure what to enter, see Checking Network Settings, or ask the network administrator or another person knowledgeable about the network.
Connecting to a Wireless Remote Control This camera can also be connected to Wireless Remote Control BR-E1 (sold separately, via Bluetooth for remote control shooting. 1. Select [ : Wi-Fi/Bluetooth connection]. 2. Select [ Connect to Wireless Remote]. 3. Select [Add a device to connect to].
4. Pair the devices. When the [Pairing] screen appears, press and hold the and buttons on the BR-E1 simultaneously for at least 3 sec. After a message confirms that the camera is paired with the BR-E1, press < >. 5. Set up the camera for remote shooting. When shooting still photos, select [ When recording movies, set [ ] or [ ] as the drive mode ( : Remote control] to [Enable]. For instructions after the pairing is complete, refer to the BR-E1's Instruction Manual.
Canceling the Pairing Before pairing with a different BR-E1, clear the information about the connected remote control. 1. Select [ : Wi-Fi/Bluetooth connection]. 2. Select [ Connect to Wireless Remote]. 3. Select [Delete connection information].
4. Select [OK].
Reconnecting via Wi-Fi Follow these steps to reconnect to devices or Web services with registered connection settings. 1. Select [ 2. Select an item. : Wi-Fi/Bluetooth connection]. Select an item to connect to via Wi-Fi from the displayed history. If the item is not displayed, use the < >< > keys to switch screens. If [Connection history] is set to [Hide], the history will not be displayed ( ).
3. Operate the connected device. [ ] Smartphone Start Camera Connect. If the smartphone's connection destination has been changed, restore the setting to connect via Wi-Fi to the camera or the same access point as the camera. When directly connecting the camera to a smartphone via Wi-Fi, “_Canon0A” is displayed at the end of the SSID. [ ] Computer On the computer, start the EOS software.
Registering Multiple Connection Settings You can register up to 10 connection settings for the wireless communication functions. 1. Select [ 2. Select an item. : Wi-Fi/Bluetooth connection]. If the history ( keys. For details on [ Smartphone. ) is displayed, switch the screen with the < >< > Connect to smartphone], see Connecting to a For details on [ Remote control (EOS Utility)], see Connecting to a Computer via Wi-Fi.
Wi-Fi Settings 1. Select [ 2. Select an item. : Wi-Fi settings]. Wi-Fi When the use of electronic devices and wireless devices is prohibited, such as on board airplanes or in hospitals, set it to [Disable]. Password Set to [None] to allow a Wi-Fi connection to be established without a password (except when connecting to an access point via Wi-Fi). Connection history You can set the connection history of devices connected via Wi-Fi to [Show] or [Hide].
Bluetooth Settings 1. Select [ 2. Select an item. : Bluetooth settings]. Bluetooth If you will not use the Bluetooth function, select [Disable]. Check connection information You can check the name and communication status of the paired device. Bluetooth address You can check the camera's Bluetooth address.
Nickname You can change the camera nickname (displayed on smartphones and other cameras) as needed. 1. Select [ 2. Enter text using the Virtual Keyboard Operations. : Nickname]. When you finish entering characters, press the < 601 > button.
GPS Device Settings GP-E2 Smartphone GPS Connection Display You can geotag images with GPS Receiver GP-E2 (sold separately) or a Bluetooth enabled smartphone. GP-E2 1. Attach GP-E2 to the camera. Attach GP-E2 to the camera's hot shoe and turn it on. For details, refer to the GP-E2 Instruction Manual. 2. Select [ : GPS device settings].
3. In [Select GPS device], select [GPS receiver]. 4. Take the picture. For details on [Set up], refer to the GP-E2 Instruction Manual. Caution Precautions when using GP-E2 Before use, check the countries and regions where use of GPS is allowed, and follow local regulations. Update the GP-E2 firmware to Ver. 2.0.0 or later. Firmware updating requires an interface cable. For updating instructions, visit the Canon website. GP-E2 cannot be connected to the camera with a cable.
Smartphone Complete these settings after installing the dedicated Camera Connect app ( smartphone. 1. On the smartphone, activate location services. 2. Establish a Bluetooth connection. ) on the Start Camera Connect and pair the camera and smartphone via Bluetooth. 3. Select [ 4. In [Select GPS device], select [Smartphone]. 5. Take the picture. : GPS device settings]. Images are geotagged with the information from the smartphone.
GPS Connection Display You can check the status of smartphone location information acquisition in the GPS connection icon on the screens for still photo shooting or movie recording ( and , respectively). Gray: Location services are off Blinking: Location information cannot be acquired On: Location information acquired For details on how GPS connection status is indicated when GP-E2 is used, refer to the GP-E2 Instruction Manual.
Caution The smartphone can acquire location information only while it is paired with the camera via Bluetooth. Direction information is not acquired. Acquired location information may not be accurate, depending on traveling conditions or smartphone status. It may take some time to acquire location information from the smartphone after you turn the camera on. Location information is no longer acquired after any of the following operations.
Changing or Deleting Connection Settings To change or delete the connection settings, terminate the Wi-Fi connection first. 1. Select [ 2. Select an item. : Wi-Fi/Bluetooth connection]. If the history ( keys. 3. ) is displayed, switch the screen with the < >< > Select [Edit/delete device]. You can change the Bluetooth connection by selecting a smartphone labeled with [ ] in gray.
4. 5. Select the device for which to change or delete the connection settings. Select an option. Change or delete the connection settings on the displayed screen. Change device nickname You can change the nickname using the virtual keyboard ( Viewable imgs ( ). ) Displayed when [ Connect to smartphone] is selected. Settings will appear at the bottom of the screen.
Airplane Mode You can temporarily disable Wi-Fi and Bluetooth functions. 1. Select [ 2. Set to [On]. [ : Airplane mode]. ] is displayed on the screen. Note [ ] may not be displayed during Live View shooting, movie recording, or playback, depending on display settings. If it is not displayed, press the < > button repeatedly to access detailed information display.
Clearing Wireless Communication Settings to Default All wireless communication settings can be deleted. By deleting the wireless communication settings, you can prevent their information from being exposed when you lend or give your camera to other people. 1. Select [ 2. Select [OK]. : Clear wireless settings]. Caution Performing [ : Clear all camera settings] does not delete the wireless communication setting information.
View Info Screen You can check error details and the camera's MAC address. 1. Select [ 2. Press the < : Wi-Fi/Bluetooth connection]. > button. The [View info] screen will appear. When an error has occurred, press < 611 > to display the error content.
Virtual Keyboard Operations (1) Input area, for entering text (2) Cursor keys, for moving in the input area (3) Current no. of characters/no. available (4) Keyboard (5) Switch input modes (6) Space (7) Delete a character in the input area (8) Finish the text entry Use the < > dial to move within (2). Use the < > < > < >< > keys to move within (4)–(8). Press < > to confirm input or when switching input modes.
Responding to Error Messages When an error occurs, display the details of the error by following one of the procedures below. Then, eliminate the cause of the error by referring to the examples shown in this chapter. On the [View info] screen, press < >. Select [Error details] on the [Wi-Fi on] screen. 11 12 21 22 23 61 63 64 65 66 67 68 69 91 125 126 127 141 142 151 152 Note When an error occurs, [Err**] is displayed in the upper right of the [Wi-Fi/ Bluetooth connection] screen.
21: No address assigned by DHCP server What to check on the camera On the camera, IP address is set to [Auto setting]. Is this the correct setting? • If no DHCP server is used, specify the settings after setting the IP address to [Manual setting] on the camera ( ). What to check on the DHCP server Is the power of the DHCP server on? • Turn on the DHCP server. Are there enough addresses for assignment by the DHCP server? • Increase the number of addresses assigned by the DHCP server.
22: No response from DNS server What to check on the camera On the camera, does the DNS server's IP address setting match the server's actual address? • Set the IP address to [Manual setting]. Then, on the camera, set the IP address that matches the address of the DNS server used ( ). What to check on the DNS server Is the power of the DNS server on? • Turn on the DNS server.
23: Device with same IP address exists on selected network What to check on the camera Do the camera and another device connected via Wi-Fi to the same network have the same IP address? • Change the camera's IP address to avoid using the same address as another device on the network. Otherwise, change the IP address of the device that has a duplicate address. • If the camera's IP address is set to [Manual setting] in network environments using a DHCP server, change the setting to [Auto setting] ( ).
61: Selected SSID wireless LAN network not found Are any obstacles blocking the line of sight between the camera and the antenna of the access point? • Move the antenna of the access point to a position clearly visible from the point of view of the camera ( ). What to check on the camera Does the SSID set on the camera match that of the access point? • Check the SSID at the access point, then set the same SSID on the camera.
63: Wireless LAN authentication failed Are the camera and the access point set to use the same authentication method? • The camera supports the following authentication methods: [Open system], [Shared key], and [WPA/WPA2-PSK]. Are the camera and the access point set to use the same password for authentication? • Check upper- and lower-case letters, and make sure the correct password for authentication is set on the camera.
66: Incorrect wireless LAN password Are the camera and the access point set to use the same password for authentication? • Check upper- and lower-case letters, and make sure the correct password for authentication is set on the camera. 67: Incorrect wireless LAN encryption method Are the camera and the access point set to use the same encryption method? • The camera supports the following encryption methods: WEP, TKIP, and AES.
125: Check the network settings Is the network connected? • Check the connection status of the network. 126: Could not connect to server image.canon is under maintenance or temporarily busy. • Try accessing the service again later. 127: An error has occurred A problem other than error code number 121 to 126 occurred while the camera is connected to the Web service. • Try again to establish the Wi-Fi connection to image.canon. 141: Printer is busy. Try connecting again.
Wireless Communication Function Precautions Distance Between the Camera and the Smartphone Installation Location of Access Point Antenna Nearby Electronic Devices Precautions for Using Multiple Cameras If the transmission rate drops, the connection is lost, or other problems occur when using the wireless communication functions, try the following corrective actions.
Installation Location of Access Point Antenna When using indoors, install the device in the room where you are using the camera. Install the device where people or objects do not come between the device and the camera.
Nearby Electronic Devices If the Wi-Fi transmission rate drops because of the influence of the following electronic devices, stop using them or move further away from the devices to transmit communication. The camera communicates over Wi-Fi via IEEE 802.11b/g/n using radio waves in the 2.4 GHz band.
Precautions for Using Multiple Cameras When connecting multiple cameras to one access point via Wi-Fi, make sure the cameras' IP addresses are different. When multiple cameras are connected to one access point via Wi-Fi, the transmission rate drops. When there are multiple IEEE 802.11b/g/n (2.4 GHz band) access points, leave a gap of five channels between each Wi-Fi channel to reduce radio wave interference. For example, use channels 1, 6, and 11, channels 2 and 7, or channels 3 and 8.
Security If security settings have not been properly set, the following problems may occur. Transmission monitoring Third parties with malicious intent may monitor wireless LAN transmissions and attempt to acquire the data you are sending. Unauthorized network access Third parties with malicious intent may gain unauthorized access to the network you are using to steal, modify, or destroy information.
Checking Network Settings Windows Open the Windows [Command Prompt], then type ipconfig/all and press the key. In addition to the IP address assigned to the computer, the subnet mask, gateway, and DNS server information are also displayed. macOS In macOS, open the [Terminal] application, enter ifconfig -a, and press the key. The IP address assigned to the computer is indicated in the [en0] item next to [inet], in the format “***.***.***.***”.
Wireless Communication Status Wireless communication status can be checked on the screen.
Bluetooth Function Indicator Bluetooth Function Other than [Disable] [Disable] Connection Status Screen Bluetooth connected Bluetooth not connected Bluetooth not connected 628 Not displayed
Set-up This chapter describes menu settings on the set-up ([ : Set-up]) tab. (< to the right of page titles indicates functions only available in Creative Zone modes >, < >, < >, or < >).
Tab Menus: Set-up Set-up 1 (1) Select folder (2) File numbering (3) Auto rotate (4) Format card Set-up 2 (1) Auto power off (2) Disp.
Set-up 3 (1) Video system (2) Touch control (3) Beep (4) Battery info.
Set-up 5 (1) Custom Functions(C.Fn) (2) Clear settings (3) Copyright information (4) Manual/software URL (5) Certification Logo Display (6) Firmware Caution [Screen off/on btn], [Viewfinder display], [ button display options], and [Firmware] are not displayed in Live View shooting or movie recording. In Live View shooting, the following screen is displayed for [ 4].
In movie recording, the following screen is displayed for [ 1]. (1) Select folder (2) File numbering (3) Auto rotate (4) Add rotate info (5) Format card In movie recording, the following screen is displayed for [ 4].
In Basic Zone modes, the following screen is displayed for [ 5].
Selecting a Folder Creating a Folder Selecting a Folder You can freely create and select the folder where the captured images are to be saved. Creating a Folder 1. Select [ : Select folder]. 2. Select [Create folder].
3. Select [OK].
Selecting a Folder (1) Folder name (2) Number of images in folder (3) Lowest file number (4) Highest file number Select a folder on the folder selection screen. Captured images are stored in your selected folder. Note Folders A folder can contain up to 9999 images (file number 0001–9999). When a folder becomes full, a new folder with the folder number increased by one is created automatically. Also, if manual reset ( ) is executed, a new folder will be created automatically.
File Numbering Continuous Auto Reset Manual Reset The captured images saved in a folder are assigned a file number from 0001 to 9999. You can change how the image files are numbered. (Example) (1) File number 1. Select [ : File numbering].
2. Set the item. Select [Numbering]. Select [Continuous] or [Auto reset]. If you want to reset the file numbering, select [Manual reset] ( ). Select [OK] to create a new folder, and the file number will start with 0001. Caution If the file number in folder 999 reaches 9999, shooting will not be possible even if the card still has storage capacity. The screen will display a message telling you to replace the card. Replace it with a new card.
Continuous When you wish to continue the file numbering sequence even after the card is replaced or a new folder is created. Even after you replace the card or create a new folder, the file numbering continues in sequence up to 9999. This is useful when you want to save images numbered anywhere between 0001 to 9999 on multiple cards or in multiple folders into one folder on a computer.
Auto Reset When you wish to restart the file numbering from 0001 each time the card is replaced or a new folder is created. When you replace the card or create a folder, the file numbering restarts from 0001 for the new images saved. This is useful if you want to organize images by cards or folders.
Manual Reset When you wish to reset the file numbering to 0001 or to start from file number 0001 in a new folder. When you reset the file numbering manually, a new folder is created automatically and the file numbering of images saved to that folder starts from 0001. This is useful, for example, if you want to use different folders for the images taken yesterday and the ones taken today.
Auto Rotate You can change the auto rotation setting that straightens images shot in vertical orientation when they are displayed. 1. Select [ : Auto rotate]. 2. Select an item. On Automatically rotates images for display on both the camera and computers. On Automatically rotates images only for display on computers. Off Caution Images captured with auto rotation set to [Off] will not rotate during playback even if you later set auto rotation to [On].
Note If a picture is taken while the camera is pointing up or down, auto rotation to the proper orientation for viewing may not be performed correctly. If images are not rotated automatically on a computer, try using EOS software.
Adding Orientation Information to Movies For movies recorded with the camera held vertically, orientation information indicating which side is up can be added automatically to enable playback in the same orientation on smartphones or other devices. 1. Select [ : Add 2. Select a setting item. rotate info]. Enable Play movies on smartphones or other devices in the orientation in which they were recorded.
Formatting If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera. Caution When the card is formatted, all images and data on the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images and data to a computer, etc. before formatting the card. 1. Select [ : Format card].
2. Format the card. Select [OK]. For low-level formatting, press the < > button to add a checkmark [ ] to [Low level format], then select [OK]. Note The card capacity displayed on the card format screen may be smaller than the capacity indicated on the card. This device incorporates exFAT technology licensed from Microsoft.
Conditions requiring card formatting The card is new. The card was formatted by a different camera or a computer. The card is full of images or data. A card-related error is displayed. Low-level formatting Perform low-level formatting if the card's writing or reading speed seems slow or if you want to totally erase the data on the card. Since low-level formatting will format all recordable sectors on the card, the formatting will take longer than normal formatting.
Auto Power Off You can change the camera's auto power off time. 1. Select [ : Auto power off]. 2. Select an item. Note The screen turns off in approx. 30 min. even when set to [ screen, press the < > button. 649 ].
Display Brightness 1. Select [ : Disp. brightness]. 2. Make the adjustment. Referring to the gray chart, use the < >. brightness, then press < >< > keys to adjust the Note To check the image's exposure, referring to the histogram is recommended ( 650 ).
Screen Off/On You can set the camera so that the screen turns off and on as you press the shutter button halfway in viewfinder shooting. 1. Select [ : Screen off/on btn]. 2. Select an item. Shutter btn. The screen turns off when you press the shutter button halfway. To turn on the screen, release the button. Shutter/DISP Display is cleared and the screen turns off when you press the shutter > button to display the menu screen. button halfway.
Date/Time/Zone When you turn on the power for the first time or if the date/time/zone have been reset, follow these steps to set the time zone first. By setting the time zone first, you can simply adjust this setting as needed in the future and the date/time will be updated to match it. Since the captured images will be appended with the shooting date and time information, be sure to set your date/time. 1. Select [ : Date/Time/Zone].
2. Set the time zone. Use the < >< Press < >. Press < >. Use the < >< > keys to select [Time zone]. > keys to select the time zone, then press < If your time zone is not listed, press the < difference from UTC in [Time difference]. 653 >.
Use the < >< > keys to select a [Time difference] item (+ –/ hour/minute), then press < >. Use the < >< > keys to set it, then press < >. After entering the time zone or time difference, use the < keys to select [OK], then press < >. 3. >< Set the date and time. Use the < >< Use the < >< > keys to select an item, then press < > keys to set it, then press < 654 >. >.
4. Set daylight saving time. Set it as necessary. Use the < >< Use the < >< > keys to select [ > keys to select [ ], then press < ], then press < >. >. When the daylight saving time is set to [ ], the time set in step 3 will advance by 1 hour. If [ ] is set, the daylight saving time will be canceled and the time will go back by 1 hour. 5. Exit the setting. Use the < >< > keys to select [OK].
Note Auto power off time may be extended while the [ : Date/Time/Zone] screen is displayed.
Language 1. Select [ : Language 2. Set the desired language. ].
Video System Set the video system of any television used for display. This setting determines the frame rates available when you record movies. 1. Select [ : Video system]. 2. Select an item. For NTSC For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.). For PAL For areas where the TV system is PAL (Europe, Russia, China, Australia, etc.).
Touch Control 1. Select [ : Touch control]. 2. Select an item. [Sensitive] provides a more reactive touch-screen panel response than [Standard]. To disable touch operations, select [Disable]. Caution Precautions for touch-screen operations Do not use sharp objects such as fingernails or ballpoint pens for touch operations. Do not use wet fingers for touch operations. If the screen has any moisture or if your fingers are wet, the touch-screen panel may not respond or malfunction may occur.
Beeps 1. Select [ : Beep]. 2. Select an item. Enable The camera beeps after focusing and in response to touch operations. Touch Disables beeping for touch operations. Disable Disables beeping for focus confirmation, self-timer shooting, and touch operations.
Battery Information You can check the conditions of the battery you are using on the screen. 1. Select [ : Battery info.]. (1) Battery position (2) Model of battery or household power source used. (3) The battery level ( ) is displayed. (4) Battery's recharge performance level is displayed in three levels. : Battery's recharge performance is good. : Battery's recharge performance is slightly degraded. : Purchasing a new battery is recommended.
Note If a battery communication error message is displayed, follow the instructions in the message.
Sensor Cleaning Cleaning Now Cleaning Automatically Cleaning Manually Cleaning Now 1. Select [ : Sensor cleaning]. 2. Select [Clean now ]. Select [OK] on the confirmation screen.
Cleaning Automatically 1. Select [Auto cleaning 2. Select a setting item. Use the < >< ]. > keys to select an item, then press < >. Note For best results, clean with the camera in a stable position on a desk or other flat surface. Even if you repeat the sensor cleaning, the result will not improve much. Note that ] may not be available immediately after cleaning.
Cleaning Manually Dust that could not be removed by automatic cleaning can be removed manually with a commercially available blower or similar tool. Always use a fully charged battery. The image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. 1. Select [ : Sensor cleaning]. 2. Select [Clean manually]. 3. Select [OK]. 4. Remove the lens and clean the sensor.
5. End the cleaning. Set the power switch to < >. Note Using the household power outlet accessories (sold separately) is recommended. Caution While cleaning the sensor, never do any of the following. If the power is cut off, the shutter will close and the reflex mirror will go back down. These may result in damaging the image sensor, shutter curtains, and reflex mirror. • Setting the power switch to < >. • Removing or inserting the battery. The surface of the image sensor is extremely delicate.
Viewfinder Display Electronic Level Grid Flicker Detection 1. Select [ : Viewfinder display]. 2. Select an item. Select with the < >< > keys, then press < 667 >.
Electronic Level The electronic level appears when you press the shutter button halfway. Also available in vertical shooting. (1) Electronic level (2) Horizontal (3) Tilted 1° (4) Tilted 2° or more Caution Only horizontal tilt can be checked. (Forward/backward tilt is not displayed.) There may be a margin of error of approx. ±1°. Note An asterisk “*” to the right of [ : Viewfinder display] indicates that the default viewfinder display setting has been changed.
Grid You can display a grid in the viewfinder to help you check the camera tilt or compose the shot. Flicker Detection If you set this function, < > will appear in the viewfinder when the camera detects flicker caused by the blinking of the light source. Note If you set [ : Anti-flicker shoot.] to [Enable], you can shoot with reduced unevenness of exposure caused by the flicker ( ).
INFO Button Display Options You can select the information displayed on the screen in response to pressing the < button when the camera is ready to shoot. 1. Select [ : 2. Select an option. button display options]. Select the desired display option, then add a checkmark [ Select [OK]. 670 ].
Electronic Level The red line turns green when the image is essentially straight. Only horizontal tilt can be checked. (Forward/backward tilt is not displayed.) (1) Horizontal Caution There may be a margin of error of approx. ±1°. If the camera is very tilted, the electronic level's margin of error will be larger. Note The electronic level is not displayed in Live View shooting when the AF method is set to [ +Tracking].
Grid Display When Shooting You can display grid lines in Live View shooting or movie recording to help you level the camera vertically and horizontally. 1. Display the Live View image. Press the < 2. > button. Select [ : Grid when shooting].
3. Select an item. Off No grid display. 3x3 Displays grid lines in a 3x3 pattern to help you level the camera vertically and horizontally. 6x4 Displays grid lines in a 6x4 pattern to help you level the camera vertically and horizontally. 3x3+diag Displays a grid together with diagonal lines to help you level the camera vertically and horizontally and compose with better balance by aligning the intersections over the subject.
Shutter Button Function for Movies You can set the functions performed by pressing the shutter button halfway or completely during movie recording. 1. Select [ : Shutter btn function for movies].
2. Select an item. Half-press Specify the function performed by pressing the shutter button halfway. Fully-press Specify the function performed by pressing the shutter button completely. With [Fully-press] set to [Start/stop mov rec], you can start/stop movie recording not only by pressing the movie shooting button but also by pressing the shutter button completely, or by using Wireless Remote Control BR-E1 or Remote Switch RS-60E3.
Switching AF Point Selection and AE Lock Buttons You can switch the functions of the hand size or how you hold the grip. 1. Select [ : Switch 2. Select a setting item. and / buttons, if this is more convenient for your button].
HDMI Resolution Set the image output resolution used when the camera is connected to a television or external recording device with an HDMI cable. 1. Select [ : HDMI resolution]. 2. Select an item. Auto Images are automatically displayed at optimal resolution for connected televisions. 1080p Output at 1080p resolution. Select if you prefer to avoid display or delay issues when the camera switches resolution.
Multi-Function Lock Specify camera controls to lock when the Multi-function lock is enabled. This can help prevent accidentally changing settings. 1. Select [ : Multi function lock]. 2. Select camera controls to lock. Press < > to add a checkmark [ ]. Select [OK]. The camera returns to shooting standby, and controls are now locked or unlocked each time you press the < > button.
Note If it is changed from the default setting, an asterisk “*” will be displayed on the right edge of [ : Multi function lock]. Setting details are reset when [Clear all camera settings] in [ : Clear settings] is performed. You can also lock/unlock controls in shooting standby under the following conditions.
Custom Functions (C.Fn) Setting Custom Functions Custom Functions Custom Function Setting Items Setting Custom Functions 1. Select [ : Custom Functions(C.Fn)]. 2. Select a Custom Function number. Use the < < >. >< > keys to select a function number (1), then press Current Custom Function settings are indicated below the respective function number at the bottom of the screen (2).
3. Change the setting as desired. Select a setting option. To set up another Custom Function, repeat steps 2–3. Note To clear all Custom Function settings you have configured (except [Custom Controls]), select [Clear all Custom Func. (C.Fn)] in [ : Clear settings].
Custom Functions Shaded Custom Functions do not function during Live View (LV) shooting or movie recording. (Settings are disabled.) C.Fn I: Exposure LV Shooting Movie Recording (1) Exposure level increments ○ ○ (2) ISO expansion ○ ○ (3) ISO speed setting increments ○ (4) Safety shift ○ (5) Exposure comp. auto cancel ○ In < > mode ○ C.Fn II: Autofocus/Drive LV Shooting (1) Movie Recording Auto AF pt sel.
Custom Function Setting Items Custom Functions are organized into three groups based on the type of function: C.Fn I: Exposure, C.Fn II: Autofocus/Drive, C.Fn III: Operation/Others. C.Fn I: Exposure C.Fn 1: Exposure level increments Sets 1/2-stop increments for the shutter speed, aperture value, exposure compensation, AEB, flash exposure compensation, etc. 0:1/3-stop 1:1/2-stop Note When set to [1:1/2-stop], exposure level display is as follows. C.
C.Fn 4: Safety shift You can shoot with the shutter speed and aperture value automatically adjusted to enable standard exposure if standard exposure would not be available under your specified shutter speed or aperture value in < > or < > mode. 0:Disable 1:Enable C.Fn 5: Exposure comp. auto cancel 0:Enable When you set the power switch to < canceled. >, the exposure compensation setting will be 1:Disable The exposure compensation setting will not be canceled even if you set the power switch to < >.
C.Fn II: Autofocus/Drive C.Fn 6: Auto AF pt sel.:EOS iTR AF Use this function to autofocus in viewfinder shooting by recognizing people. Applies when the AF area selection mode is set to [Manual select.:Zone AF], [Manual select.:Large Zone AF], or [Auto selection AF]. 0:EOS iTR AF (Face priority) Faces are given greater priority than with [1:Enable] when the camera selects AF points automatically. In [One-Shot AF] mode, this makes it easier to focus on faces of still human subjects in the AF area.
C.Fn 7: AF area selection method 0: →AF area selection button After you press the < > or < > button in viewfinder shooting, pressing the < button changes the AF area selection mode. In Live View shooting, pressing the < button changes the AF method. 1: > > →Main Dial After you press the < selection mode. > or < > button, turning the dial changes the AF area Note When [1: →Main Dial] is set, use the < horizontally. >< > keys to move the AF point C.
C.Fn 9: VF display illumination 0:Auto The AF points achieving focus in low light or with a dark subject will automatically light up in red. 1:Enable The AF points light up in red regardless of the ambient light level. 2:Disable The AF points do not light up in red. Note When you press the < > or < > button, the AF points will light up in red regardless of this setting. The aspect ratio lines, electronic level, and grid in the viewfinder will also light up in red. C.
C.Fn III: Operation/Others C.Fn 11: Warnings in viewfinder The < > icon can be displayed in the field of view of the viewfinder when any of the following functions are set ( ). Select the function for which you want the warning icon to appear, then press < > to add a checkmark [ ]. Select [OK] to register the setting. When monochrome If the [ set : Picture Style] is set to [Monochrome] ( ), the warning icon will appear.
C.Fn 13: Custom Controls You can assign frequently used functions to camera buttons or dials according to your preferences for easy operations. 1. Select a camera control. 2. Select a function to assign. Press < > to set it. Note With the screen in step 1 displayed, you can press the < > button to restore the Custom Control settings to their defaults. [Custom Controls] settings are not cleared even if you select [Clear all Custom Func. (C.Fn)].
Functions available for camera controls AF Function Metering and AF start ○ AF stop ○ ○ ○ ○ Exposure Function Metering start ○ AE lock/FE lock ○ ○ AE lock ○ ○ FE lock ○ ○ AE lock (while button pressed) Expo comp (hold btn, turn ○ ○ ) Flash exp.
Operation Function Screen On/Off ○ Wi-Fi/Bluetooth connection ○ Maximize screen brightness (temp) ○ ○ Menu display ○ Flash function settings ○ Depth-of-field preview ○ No function (disabled) ○ ○ C.Fn 14: Retract lens on power off You can set whether to retract gear-type STM lenses (such as EF40mm f/2.8 STM) automatically when the camera's power switch is set to < >. 0:Enable 1:Disable Caution With auto power off, the lens will not retract regardless of the setting.
Clearing Settings The camera's shooting function settings and menu settings can be restored to their defaults. This option is available in Creative Zone modes. 1. Select [ : Clear settings]. 2. Select [Clear all camera settings]. 3. Select [OK].
Note Performing [Clear all camera settings] also resets [ : Multi function lock] settings and the locked state of the < > button. FAQ Clearing all camera settings After the procedure above, select [Clear all Custom Func. (C.Fn)] in [ : Clear settings] to clear all the Custom Function settings ( ). Note that [Custom Controls] settings are not cleared.
Copyright Information Checking the Copyright Information Deleting the Copyright Information When you set the copyright information, it will be recorded to the image as Exif information. 1. Select [ : Copyright information]. 2. Select an item.
3. Enter text. Turn the < By selecting [ > dial to select a character, then press < To delete single characters, select [ 4. > to enter it. ], you can change the input mode. ] or press the < > button. Exit the setting. Press the < > button, then press [OK]. Checking the Copyright Information When you select [Display copyright info.] in step 2, you can check the [Author] and [Copyright] information that you entered.
Deleting the Copyright Information When you select [Delete copyright information] in step 2, you can delete the [Author] and [Copyright] information. Caution If the entry for “Author” or “Copyright” is long, it may not be displayed entirely when you select [Display copyright info.]. Note You can also set or check the copyright information with EOS Utility (EOS software).
Other Information Manual/software URL To download instruction manuals, select [ : Manual/software URL] and scan the displayed QR code with a smartphone. You can also use a computer to access the website at the URL displayed and download software. Certification Logo Display Select [ : Certification Logo Display] to display some of the logos of the camera's certifications. Other certification logos can be found on the camera body and packaging.
My Menu On the My Menu tab, you can register menu items and Custom Functions you often adjust. Caution When [ : Menu display] is set to [Guided], the [ Change [ : Menu display] to [Standard] ( ). • Tab Menus: My Menu • Registering My Menu 698 ] tab will not be displayed.
Tab Menus: My Menu (1) Add My Menu tab (2) Delete all My Menu tabs (3) Delete all items (4) Menu display 699
Registering My Menu Adding My Menu Tabs Registering Menu Items on My Menu Tabs My Menu Tab Settings Deleting All My Menu Tabs/Deleting All Items Menu display Adding My Menu Tabs 1. Select [Add My Menu tab]. 2. Select [OK]. You can create up to five My Menu tabs by repeating steps 1 and 2.
Registering Menu Items on My Menu Tabs 1. Select [MY MENU*: Configure]. 2. Select [Select items to register]. 3. Register the desired items. Select an item, then press < >. Select [OK] on the confirmation screen. You can register up to six items. To return to the screen in step 2, press the < 701 > button.
My Menu Tab Settings You can sort and delete items under the menu tab, and rename or delete the menu tab. Sort registered items You can change the order of the registered items in My Menu. Select [Sort registered >. With [ ] displayed, turn the < > items], select an item to rearrange, then press < dial to rearrange the item, then press < >. Delete selected items/Delete all items on tab You can delete any of the registered items.
Rename tab You can rename the My Menu tab from [MY MENU*]. 1. Select [Rename tab]. 2. Enter text. Select [ ] or press the < characters. Turn the dial to select a character, then press < By selecting [ 3. > button to delete any unneeded ], you can change the input mode. Confirm input. Press the < > button, then select [OK]. 703 >.
Deleting All My Menu Tabs/Deleting All Items You can delete all the created My Menu tabs or My Menu items registered under them. Delete all My Menu tabs You can delete all My Menu tabs you created. When you select [Delete all My Menu tabs], all the tabs from [MY MENU1] to [MY MENU5] will be deleted and the [ ] tab will revert to its default. Caution Performing [Delete all My Menu tabs] will also clear tab names renamed with [Rename tab].
Menu display You can select [Menu display] to set the menu screen that is to appear first when you press the < > button. Normal display Displays the last displayed menu screen. Display from My Menu tab Displays with the [ ] tab selected. Display only My Menu tab Restricts display to the [ ] tab ([ ]/[ ]/[ 705 ]/[ ]/[ ] tabs are not displayed).
Reference This chapter provides reference information on camera features.
Importing Images to a Computer Connecting to a Computer via an Interface Cable (Sold Separately) Card Reader Connecting to a Computer via Wi-Fi You can use EOS software to import images from the camera to a computer. There are three ways to do this. Connecting to a Computer via an Interface Cable (Sold Separately) 1. 2. Install the software ( ). Connect the camera to the computer with an interface cable (sold separately). As an interface cable, you can use a IFC-600PCU cable (sold separately).
Caution With Wi-Fi connection established, the camera cannot communicate with the computer even if they are connected with an interface cable. Card Reader You can use a card reader to import images to a computer. 1. Install the software ( 2. Insert the card into the card reader. 3. Use Digital Photo Professional to import the images. ). Refer to the Digital Photo Professional Instruction Manual.
Household Power Outlet Accessory You can power the camera with a household power outlet by using the DC Coupler DR-E18 and AC Adapter AC-E6N (each sold separately). 1. Connect the DC coupler's plug. Connect the DC coupler's plug to the AC Adapter's socket. 2. Connect the power cord. Connect the power cord as shown in the illustration. After using the camera, unplug the power plug from the power outlet. 3. Insert the DC coupler.
4. Pull the DC cord through the hole. Open the DC cord hole cover and pass the cord through as shown. Close the battery compartment cover. Warning Do not connect or disconnect the power cord when the camera's power switch is set to < >.
Troubleshooting Guide Power-related problems Shooting-related problems Problems with wireless features Operation problems Display problems Playback problems Sensor cleaning problems Computer connection problems If a problem occurs with the camera, first refer to this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center.
Power-related problems The battery does not charge. If the battery's remaining capacity ( ) is 94% or higher, the battery will not be charged. Do not use any battery packs other than a genuine Canon Battery Pack LP-E17. The charger's lamp blinks at high speed. If (1) the battery charger or battery has a problem or (2) communication with the battery failed (with a non-Canon battery pack), the protection circuit will stop charging, and the charge lamp will blink in orange at a constant high speed.
The battery becomes exhausted quickly. Use a fully charged battery ( ). The battery performance may have degraded. See [ : Battery info.] to check the battery's recharge performance level ( ). If the battery performance is poor, replace the battery with a new one. The number of available shots will decrease with any of the following operations: • Pressing the shutter button halfway for a prolonged period. • Activating the AF frequently without taking a picture. • Using the lens's Image Stabilizer.
Shooting-related problems The lens cannot be attached. The camera cannot be used with RF or EF-M lenses ( ). The viewfinder is dark. Install a charged battery in the camera ( ). No images can be shot or recorded. Make sure the card is properly inserted ( ). Slide the card's write-protect switch to the Write/Erase setting ( ). If the card is full, replace the card or delete unnecessary images to make space ( , ).
The image is out of focus or blurred. Set the lens's focus mode switch to < > ( ). Press the shutter button ( ) gently to prevent camera shake ( ). With a lens equipped with an Image Stabilizer, set the Image Stabilizer switch to < >. In low light, the shutter speed may become slow. Use a faster shutter speed ( ), set a higher ISO speed ( ), use flash ( , ), or use a tripod. See Minimizing blurred photos. There are fewer AF points or the Area AF frame shape is different.
The maximum burst during continuous shooting is lower. If you shoot a subject that has fine detail such as a field of grass, the file size will be larger, and the actual maximum burst may be lower than the number listed in Still photo file size / Number of possible shots / Maximum burst for continuous shooting. Even after I change the card, the maximum burst displayed for continuous shooting does not change.
The external Speedlite does not fire. Make sure the external Speedlite is securely attached to the camera. The Speedlite always fires at full output. If you use a flash unit other than an EL/EX series Speedlite, the flash will always fire at full output ( ). The flash always fires at full output when [Flash metering mode] in external flash Custom Function settings is set to [TTL flash metering] (autoflash) ( ). Flash exposure compensation cannot be set for the external Speedlite.
During Live View shooting, a white or red icon is displayed. It indicates that the camera's internal temperature is high. Image quality of still photos may be worse when a white [ ] icon is displayed. If the red [ ] icon is displayed, it indicates that the Live View shooting will soon stop automatically ( ). Expanded ISO speeds cannot be selected for still photo shooting. Check the [ISO speed] setting under [ : ISO speed settings].
Expanded ISO speeds cannot be selected for movie recording. Check the [ISO speed] setting under [ : ISO speed settings]. Expanded ISO speeds are not available when [ : Highlight tone priority] is set to [Enable]. The exposure changes during movie recording. If you change the shutter speed or aperture value during movie recording, the changes in the exposure may be recorded. Recording a few test movies is recommended if you intend to perform zooming during movie recording.
Problems with wireless features Cannot pair with a smartphone. Use a smartphone compliant with Bluetooth Specification Version 4.1 or later. Turn on Bluetooth from the smartphone settings screen. Pairing with the camera is not possible from the smartphone's Bluetooth settings screen. Install the dedicated app Camera Connect (free of charge) on the smartphone ( ). A previously paired smartphone cannot be paired with the camera again if the camera's registration is retained on the smartphone.
Operation problems Settings cannot be adjusted with the < > or < Press the < > button to unlock the controls ( Check the [ : Multi function lock] setting ( ). > dial. ). Touch operation is not possible. Make sure [ : Touch control] is set to [Standard] or [Sensitive] ( Check the [ : Multi function lock] setting ( ). ). A camera button or dial does not work as expected. Check these settings: [ : Switch / button], as well as [AF area selection method] and [Custom Controls] in [ : Custom Functions(C.
Display problems The menu screen shows fewer tabs and items. Certain tabs and options do not appear in Basic Zone or for Live View shooting and movie recording. The display starts with [ ] My Menu, or the [ ] tab alone is displayed. [Menu display] on the [ ] tab is set to [Display from My Menu tab] or [Display only My Menu tab]. Set [Normal display] ( ). The file name's first character is an underscore (“_”). Set [ : Color space] to [sRGB].
In the viewfinder, the AF point display speed is slow. In low temperatures, the display speed of the AF points may become slower due to the AF point display device's (liquid crystal) characteristics. The display speed will return to normal at room temperature. The screen does not display a clear image. If the screen is dirty, use a soft cloth to clean it. The screen display may seem slightly slow in low temperatures or may look black in high temperatures. It will return to normal at room temperature.
Playback problems A red box is displayed on the image. [ : AF point disp.] is set to [Enable] ( ). During image playback, the AF points are not displayed. The AF points are not displayed when the following types of images are played back: : • Images taken in < • Images taken in < > mode. : > mode. • Images taken with Multi Shot Noise Reduction applied. • Cropped images. The image cannot be erased. If the image is protected, it cannot be erased ( ). Still photos and movies cannot be played back.
The movie appears to freeze momentarily. If there is a drastic change in the exposure level during autoexposure movie recording, the recording will stop momentarily until the brightness stabilizes. In such a case, shoot in the < > mode ( ). No picture appears on the television. Make sure [ : Video system] is set to [For NTSC] or [For PAL] correctly for the video system of your television. Make sure the HDMI cable's plug is inserted all the way in ( ).
Sensor cleaning problems The shutter makes a sound during sensor cleaning. Under [ : Sensor cleaning], when you select [Clean now ], the shutter will make a mechanical sound during the cleaning, but no picture will be recorded to the card ( ). Automatic sensor cleaning does not work. If you repeatedly turn the power switch < > and < period, the < > icon may not be displayed ( ). > within a short time Computer connection problems I cannot import images to a computer.
Error Codes If there is a problem with the camera, an error message will appear. Follow the on-screen instructions. If the problem persists, write down the error code (Err xx) and contact a Canon Service Center.
System Map (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) (16) (18) (17) (19) (20) (33) (21) (22) (23) (34) (26) (39) (24) (35) (37) (31) (25) (27) (28) (29) Speedlite Transmitter ST-E2 (2) Speedlite Transmitter ST-E3-RT (3) Speedlite 270EX II (4) Speedlite EL-100 (5) Speedlite 430EX III-RT/430EX III (6) Speedlite 470EX-AI (7) Speedlite 600EX II-RT (8) Macro Ring Lite MR-14EX II (9) Macro Twin Lite MT-26EX-RT (10) Directional Stereo Microphone DM-E1
(21) Magnifier MG-Ef (22) Rubber Frame Ef (23) E-series Dioptric Adjustment Lenses (24) Angle Finder C (25) Hand Strap E2 (26) Strap (27) Battery Pack LP-E17 (28) Battery Charger LC-E17 (29) AC Adapter AC-E6N*3 (30) DC Coupler DR-E18*3 (31) Protecting Cloth PC-E1/E2 (32) SD/SDHC/SDXC memory cards (33) Remote Controller Adapter RA-E3*4 (34) HDMI Cable HTC-100 (approx. 2.9m/9.5 ft.) (35) Interface Cable IFC-600PCU (approx. 1.0 m/3.3 ft.
ISO Speed in Movie Recording In < > mode The ISO speed will be set automatically within ISO 100–12800. To expand the maximum available ISO speed in the automatic setting range to H (equivalent to ISO 25600; ), set [Max for Auto] in [ : ISO speed settings] to [H(25600)] with [2: ISO expansion] in [ : Custom Functions(C.Fn)] set to [1:Enable] ( ). In < > mode With ISO speed set to [ ], the speed is automatically set in a range of ISO 100– 12800.
Information Display Quick Control Screen (in Viewfinder Shooting) Live View Shooting Screen Movie Recording Screen Scene Icons Playback Screen 731
Quick Control Screen (in Viewfinder Shooting) Each time you press the < > button, the information display will change. The display will show only the settings currently applied. When set to [ : Shooting screen: Guided] (1) (2) (3) (4) (5) (8) (6) (9) (7) (1) Shooting mode* (2) Shutter speed (3) Aperture value (4) ISO speed (5) Exposure compensation (6) Return (7) Drive mode (8) AF operation (9) AF area selection mode * These functions cannot be set with Quick Control.
When set to [ : Shooting screen: Standard] (1) (11) (2) (12) (13) (14) (15) (16) (17) (18) (3) (4) (5) (6) (7) (8) (9) (10) (1) Shutter speed (2) Shooting mode* (3) Exposure compensation/AEB setting (4) White balance (5) Picture Style (6) White balance correction (7) AF operation (8) AF area selection mode (9) Return (10) Metering mode (11) Aperture value (12) ISO speed (13) Flash exposure compensation (14) Wi-Fi/Bluetooth connection (15) White balance bracketing (16) Cu
Live View Shooting Screen Each time you press the < > button, the information display will change. The display will show only the settings currently applied.
(1) Battery level (2) Maximum burst (3) Available shots/Sec.
Note You can specify the information displayed in response to pressing the < > button ( ). The electronic level is not displayed when [AF method] is set to [ +Tracking] or the camera is connected via HDMI to a television. Other icons may be displayed temporarily after setting adjustments.
Movie Recording Screen Each time you press the < > button, the information display will change. The display will show only the settings currently applied.
(1) Movie orientation information (2) Battery level (3) Movie recording time available/Elapsed recording time (4) Movie recording mode (5) Grid (6) AF method (7) Movie self-timer (8) Movie recording size (9) Digital zoom (10) Movie digital IS (11) Video snapshot (12) Movie Servo AF (13) Multi-function lock (14) AE lock (15) Shutter speed/Multi-function lock warning (16) Audio recording level indicator (manual/line input) (17) Aperture value (18) Exposure compensation (19)
Warning You can specify the information displayed in response to pressing the < > button ( ). The electronic level is not displayed when [AF method] is set to [ +Tracking] or the camera is connected via HDMI to a television. The electronic level, grid lines, or histogram cannot be displayed during movie recording. (The display will disappear when you start recording a movie.) When movie recording starts, the movie recording remaining time will change to the elapsed time.
Scene Icons In < > shooting mode, the camera detects the type of scene and sets all settings accordingly. The detected scene type is indicated on the upper left of the screen. Portrait Subject Non-Portrait In Motion*1 Background Nature/ Outdoor Scene In Motion*1 Close*2 Bright Background Color Gray Backlit Blue Sky Included Light blue Backlit *3 Sunset *3 Orange Spotlight Dark With Tripod*1 Dark blue *4*5 *3 *4*5 *3 * 1: Not displayed during movie recording.
Playback Screen Basic information display for still photos (1) (2) (3) (4) (5) (9) (10) (11) (6) (7) (8) (12) (13) (14) (1) Bluetooth function (2) Wi-Fi function (3) Airplane mode (4) Current image no./Total images/No. of images found (5) Battery level (6) Shutter speed (7) Aperture value (8) Exposure compensation amount (9) Rating (10) Image protection (11) Folder no.-File no.
Warning If the image was taken by another camera, certain shooting information may not be displayed. It may not be possible to play back images taken with this camera on other cameras.
(1) Aperture value (2) Shutter speed (3) Shooting mode (4) White balance (5) Auto Lighting Optimizer (6) White balance correction amount (7) Picture Style/Settings (8) Exposure compensation amount (9) Shooting date and time (10) Histogram (Brightness/RGB) (11) ISO speed (12) Highlight tone priority (13) Scroll bar (14) Metering mode (15) Flash exposure compensation amount/Bounce/Multi Shot Noise Reduction (16) File size (17) Image quality/Edited image/Cropping * When you sh
Detailed information display for movies (1) (2) (6) (3) (4) (5) (7) (8) (9) (1) Movie playback (2) Movie recording mode/Time-lapse movie/Video snapshot (3) Movie orientation information (4) Image size (5) Frame rate (6) Movie digital IS (7) Recording time (8) Movie recording format (9) Movie compression method * For simplicity, explanations are omitted for items that are also included in basic/detailed information display for still photos, which are not shown here.
AF Sensor The camera's AF sensor has 45 AF points. AF sensor patterns formed by the AF points are as follows. High-precision AF centered in the viewfinder is possible using lenses with a maximum aperture up to f/2.8. Warning The number of available AF points, the focusing patterns, and the Area AF frame shape vary by lens. For details, refer to Compatible Lenses and Autofocusing (Viewfinder Shooting). Schematic diagram (1) (2) (1) Cross-type focusing: f/5.6 vertical + f/5.
Compatible Lenses and Autofocusing (Viewfinder Shooting) Group A Group B Group C Group D Group E Group F Group G Group H Group Classification of Lenses Warning Although the camera has 45 AF points, lenses are classified into 8 groups (A–H) which vary in the number of AF points available, AF point patterns, Area AF frame shapes, and other details. Using a lens in Groups E to H will have fewer usable AF points. Lens groups are listed in Group Classification of Lenses. Check which group your lens belongs to.
Note AF points in positions indicated by [ ] blink when the < > or < > button is pressed (while [ / ] points remain lit). For details on AF point blinking/ illumination, see Meaning of Lit or Blinking AF Points. For updates on “Group Classification of Lenses,” visit the Canon website or others. Some lenses may not be available in certain countries or regions. Group A Autofocusing with 45 points is possible. All the AF area selection modes are available. : Dual cross-type AF point.
Group B Autofocusing with 45 points is possible. All the AF area selection modes are available. : Cross-type AF point. Offers excellent subject tracking and high-precision focusing. Group C Autofocusing with 45 points is possible. All the AF area selection modes are available. : Cross-type AF point. Offers excellent subject tracking and high-precision focusing. : AF points sensitive to horizontal lines.
Group D Autofocusing with 45 points is possible. All the AF area selection modes are available. : Cross-type AF point. Offers excellent subject tracking and high-precision focusing. : AF points sensitive to horizontal lines. Group E Autofocusing with 35 points is possible. (Not possible with all 45 AF points.) All the AF area selection modes are available. During automatic AF point selection, the outer frame marking the AF area (Area AF frame) will be different from 45-point Automatic selection AF.
Group F Autofocusing with 35 points is possible. (Not possible with all 45 AF points.) All the AF area selection modes are available. During automatic AF point selection, the outer frame marking the AF area (Area AF frame) will be different from 45-point Automatic selection AF. : Cross-type AF point. Offers excellent subject tracking and high-precision focusing.
Group G Autofocusing with 27 points is possible. (Not possible with all 45 AF points.) Large Zone AF (manual selection of zone) cannot be selected in AF area selection mode. During automatic AF point selection, the outer frame marking the AF area (Area AF frame) will be different from 45-point Automatic selection AF. : Cross-type AF point. Offers excellent subject tracking and high-precision focusing. : AF points sensitive to horizontal lines. : Disabled AF points (not displayed).
Group Classification of Lenses EF-S24mm f/2.8 STM A EF-S35mm f/2.8 Macro IS STM B EF-S60mm f/2.8 Macro USM B EF-S10-18mm f/4.5-5.6 IS STM D EF-S10-22mm f/3.5-4.5 USM B EF-S15-85mm f/3.5-5.6 IS USM B EF-S17-55mm f/2.8 IS USM A EF-S17-85mm f/4-5.6 IS USM B EF-S18-55mm f/3.5-5.6 C EF-S18-55mm f/3.5-5.6 USM C EF-S18-55mm f/3.5-5.6 II C EF-S18-55mm f/3.5-5.6 II USM C EF-S18-55mm f/3.5-5.6 III B EF-S18-55mm f/3.5-5.6 IS C EF-S18-55mm f/3.5-5.6 IS II B EF-S18-55mm f/3.5-5.
EF24mm f/1.4L II USM A EF24mm f/2.8 A EF24mm f/2.8 IS USM A EF28mm f/1.8 USM A EF28mm f/2.8 A EF28mm f/2.8 IS USM A EF35mm f/1.4L USM A EF35mm f/1.4L II USM A EF35mm f/2 A EF35mm f/2 IS USM A EF40mm f/2.8 STM A EF50mm f/1.0L USM A EF50mm f/1.2L USM A EF50mm f/1.4 USM A EF50mm f/1.8 A EF50mm f/1.8 II A EF50mm f/1.8 STM A EF50mm f/2.5 Compact Macro B EF50mm f/2.5 Compact Macro + LIFE SIZE Converter B EF85mm f/1.2L USM A EF85mm f/1.2L II USM A EF85mm f/1.
EF200mm f/1.8L USM A EF200mm f/1.8L USM + Extender EF1.4x I/II/III A* EF200mm f/1.8L USM + Extender EF2x I/II/III B* EF200mm f/2L IS USM A EF200mm f/2L IS USM + Extender EF1.4x I/II/III A EF200mm f/2L IS USM + Extender EF2x I/II/III B EF200mm f/2.8L USM A EF200mm f/2.8L USM + Extender EF1.4x I/II/III B EF200mm f/2.8L USM + Extender EF2x I/II/III B EF200mm f/2.8L II USM A EF200mm f/2.8L II USM + Extender EF1.4x I/II/III B EF200mm f/2.8L II USM + Extender EF2x I/II/III B EF300mm f/2.
EF400mm f/2.8L IS USM A EF400mm f/2.8L IS USM + Extender EF1.4x I/II/III B EF400mm f/2.8L IS USM + Extender EF2x I/II/III B EF400mm f/2.8L IS II USM A EF400mm f/2.8L IS II USM + Extender EF1.4x I/II/III B EF400mm f/2.8L IS II USM + Extender EF2x I/II/III B EF400mm f/2.8L IS III USM A EF400mm f/2.8L IS III USM + Extender EF1.4x B EF400mm f/2.8L IS III USM + Extender EF1.4x II B EF400mm f/2.8L IS III USM + Extender EF1.4x III B EF400mm f/2.8L IS III USM + Extender EF2x B EF400mm f/2.
EF600mm f/4L IS USM + Extender EF1.4x I/II/III B EF600mm f/4L IS USM + Extender EF2x I/II/III H (f/8) EF600mm f/4L IS II USM B EF600mm f/4L IS II USM + Extender EF1.4x I/II/III EF600mm f/4L IS II USM + Extender EF2x I/II/III B H (f/8) EF600mm f/4L IS III USM B EF600mm f/4L IS III USM + Extender EF1.4x B EF600mm f/4L IS III USM + Extender EF1.4x II B EF600mm f/4L IS III USM + Extender EF1.
EF24-105mm f/4L IS II USM B EF28-70mm f/2.8L USM A EF28-70mm f/3.5-4.5 E EF28-70mm f/3.5-4.5 II E EF28-80mm f/2.8-4L USM B EF28-80mm f/3.5-5.6 E EF28-80mm f/3.5-5.6 USM E EF28-80mm f/3.5-5.6 II E EF28-80mm f/3.5-5.6 II USM E EF28-80mm f/3.5-5.6 III USM E EF28-80mm f/3.5-5.6 IV USM E EF28-80mm f/3.5-5.6 V USM E EF28-90mm f/4-5.6 B EF28-90mm f/4-5.6 USM B EF28-90mm f/4-5.6 II B EF28-90mm f/4-5.6 II USM B EF28-90mm f/4-5.6 III B EF28-105mm f/3.5-4.5 USM B EF28-105mm f/3.5-4.
EF35-105mm f/4.5-5.6 H EF35-105mm f/4.5-5.6 USM H EF35-135mm f/3.5-4.5 B EF35-135mm f/4-5.6 USM C EF35-350mm f/3.5-5.6L USM D EF38-76mm f/4.5-5.6 E EF50-200mm f/3.5-4.5 B EF50-200mm f/3.5-4.5L B EF55-200mm f/4.5-5.6 USM D EF55-200mm f/4.5-5.6 II USM D EF70-200mm f/2.8L USM A EF70-200mm f/2.8L USM + Extender EF1.4x I/II/III B** EF70-200mm f/2.8L USM + Extender EF2x I/II/III B** EF70-200mm f/2.8L IS USM A EF70-200mm f/2.8L IS USM + Extender EF1.4x I/II/III B EF70-200mm f/2.
EF70-200mm f/4L IS II USM + Extender EF1.4x B EF70-200mm f/4L IS II USM + Extender EF1.4x II B EF70-200mm f/4L IS II USM + Extender EF1.4x III B EF70-200mm f/4L IS II USM + Extender EF2x H EF70-200mm f/4L IS II USM + Extender EF2x II H EF70-200mm f/4L IS II USM + Extender EF2x III H EF70-210mm f/3.5-4.5 USM B EF70-210mm f/4 B EF70-300mm f/4-5.6 IS USM B EF70-300mm f/4-5.6 IS II USM B EF70-300mm f/4-5.6L IS USM B EF70-300mm f/4.5-5.6 DO IS USM B EF75-300mm f/4-5.
EF100-400mm f/4.5-5.6L IS II USM + Extender EF1.4x III G (f/8) EF200-400mm f/4L IS USM Extender 1.4x B EF200-400mm f/4L IS USM Extender 1.4x: Built-in Ext. 1.4x B EF200-400mm f/4L IS USM Extender 1.4x + Extender EF1.4x I/II/III EF200-400mm f/4L IS USM Extender 1.4x: Built-in Ext. 1.4x + Extender EF1.4x I/II/III B H (f/8) EF200-400mm f/4L IS USM Extender 1.4x + Extender EF2x I/II H (f/8) EF200-400mm f/4L IS USM Extender 1.4x + Extender EF2x III G (f/8) TS-E17mm f/4L B TS-E24mm f/3.
Specifications Type Type: Digital AF/AE single-lens reflex camera Lens mount: Canon EF mount Compatible lenses: Lenses in Canon EF product group (including EF-S lenses, excluding EF-M lenses) Lens focal length: Approx. 1.6 times the focal length indicated on the lens Image sensor Type: CMOS sensor Screen size Approx. 22.3 × 14.9 mm Effective pixels* Approx. 24.1 megapixels Dual Pixel CMOS AF Supported * Rounded to the nearest 100,000.
Still photo recording Image type in still photo recording Image quality Resolution (Pixels) / 24 megapixels (6000 × 4000) / Approx. 10.6 megapixels (3984 × 2656) / Approx. 5.9 megapixels (2976 × 1984) JPEG Approx. 3.8 megapixels (2400 × 1600) RAW 24 megapixels (6000 × 4000) / Still photo pixel count Pixel count Image quality Aspect ratio 3:2 4:3 16:9 1:1 / 24 megapixels (6000 × 4000) Approx. 21.3 megapixels* (5328 × 4000) Approx. 20.
Still photo file size / Number of possible shots / Maximum burst for continuous shooting + + Possible shots (Approx.)*1 File size (Approx. MB) Image quality Maximum burst (Approx.)*1 8.4 3600 170 4.5 6610 170 4.6 6480 167 2.6 11400 167 3.1 9690 163 1.8 16010 163 1.8 16340 164 27.2 1120 40 15.8 1930 75 35.6 850 35 24.2 1250 57 * 1: Number of shots available and standard maximum burst in viewfinder shooting with a 32 GB UHS-I card conforming to Canon testing standards.
Movie recording Movie recording format: MP4 Estimated recording time, movie bit rate, and file size Total recording time (approx.) Movie bit rate File size Movie recording size 8 GB 4K UHD Full HD HD 32 GB 128 GB 23.98 fps 25.00 fps IPB (Standard) 8 min. 35 min. 2 hr. 21 min. Approx. 120 Mbps Approx. 861 MB/min. 59.94 fps 50.00 fps IPB (Standard) 17 min. 1 hr. 10 min. 4 hr. 43 min. Approx. 60 Mbps Approx. 432 MB/min. 29.97 fps 23.98 fps 25.00 fps IPB (Standard) 35 min. 2 hr. 20 min.
Recording microphone Built-in microphone: Stereo microphones External microphone terminal: 3.5 mm diameter stereo mini jack Recording media Recording media: SD, SDHC, and SDXC memory cards SD speed class Supported UHS speed class Supported UHS-I Supported * Supports high-speed writing Viewfinder Type: Eye-level SLR type, with pentamirror Focusing screen: Fixed Coverage: Vertical/horizontal: Approx. 95% * Eyepoint: Approx. 19 mm * Lens: EF50mm f/1.8 STM Magnification / angle of view: Approx. 0.
Autofocus in optical viewfinder shooting (still photo) Focusing method: TTL secondary image-forming phase-difference detection using AF-dedicated sensor Focusing operation One-Shot AF AI Focus AF Autofocus * Automatic switching between One-Shot AF and AI Servo AF AI Servo AF Manual focus Supported Autofocus in Live View shooting (still photo) and movie shooting Item Live View shooting (still photo) Movie recording • Dual Pixel CMOS AF Focus detection method Dual Pixel CMOS AF • Contrast detection*
Exposure control Metering functions under various shooting conditions Still photo shooting Item Movie recording Optical viewfinder Metering mode 216-zone (18 × 12) metering using approx. 220,000 pixel RGB+IR metering sensor TTL full-aperture metering Evaluative metering Supported Live View 384-zone (24 × 16) metering using image sensor output signals Supported * When faces are detected with [ Partial metering Supported: Approx. 6.5% of the screen Supported: Approx. 5.
Built-in flash Type: Retractable flash in the pentamirror housing Retraction method: Manual Guide number: G. No.: Approx. 12 (ISO 100, m) / 39.4 (ISO 100, feet) External flash Sync contacts: Hot shoe: X-sync contact * Maximum flash sync speed: 1/200 sec. Flash mode: E-TTL II metering Drive Drive mode and continuous shooting speed Drive mode Viewfinder shooting Live View shooting Single shooting Yes High-speed continuous*1 Max. approx. 7.0 shots/sec. Max. approx. 7.5 shots/sec.
Playback Item Magnify zoom display Stills Movies 1.
Power source Battery: Battery Pack LP-E17 × 1 AC power source AC adapter AC-E6N DC coupler DR-E18 Possible shots Shooting conditions Shooting method Temperature AE: 100% AE: 50% / FA: 50% * CIPA testing standards +23°C / 73°F Approx. 1240 shots Approx. 800 shots 0°C / 32°F Approx. 1120 shots Approx. 730 shots +23°C / 73°F Approx. 360 shots Approx. 310 shots 0°C / 32°F Approx. 330 shots Approx.
Wi-Fi Standards compliance Wi-Fi standards IEEE802.11b Transmission method DS-SS modulation IEEE802.11g OFDM modulation IEEE802.
Dimensions and weight Dimensions (W×H×D) Approx. 131.0 × 102.6 × 76.2 mm / 5.16 × 4.04 × 3.00 in. Weight Approx. 515 g / 18.17 oz. (including battery pack and card)/Approx. 471 g / 16.61 oz. (body only) Operating environment Working temperature range 0 – 40°C (32 – 104°F) Working humidity 85% or less All data above is based on Canon testing standards and CIPA (Camera & Imaging Products Association) testing standards and guidelines.
Trademarks and Licensing Trademarks About MPEG-4 Licensing Accessories Trademarks Adobe is a trademark of Adobe Systems Incorporated. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. App Store and macOS are trademarks of Apple Inc., registered in the U.S. and other countries. Google Play and Android are trademarks of Google LLC. IOS is a trademark or registered trademark of Cisco in the U.S.
About MPEG-4 Licensing “This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video. No license is granted or implied for any other use for MPEG-4 standard.
Accessories Use of genuine Canon accessories is recommended This product is designed to achieve optimum performance when used with genuine Canon accessories. Therefore, using this product with genuine accessories is highly recommended. Canon shall not be liable for any damage to this product and/or accidents such as malfunction, fire, etc. caused by the failure of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery).
CT2-B117 eos eos eos ii!ffl~~if Getting Started Guide de mise en route Guia de inicio 1tmtJta~-f5 ~~lcJ:,~tJ~m=b"--:i~Ji
English • To avoid shooting problems and accidents, first read "Safety Instructions" (Cls). • Reading this guide will help you learn to use the camera properly. • Store this guide safely so that you can use it in the future. Online product registration U.S.A. Customers Register your product online at www.powershot.com/productregistration and ... Canadian Customers Register your product online at www.canon .ca/product registration and ...
Instruction Manuals and Software Instruction Manual {this booklet) 0 This manual provides basic camera and Wi-Fi instructions. Advanced User Guide For detailed camera instructions, refer to the Advanced User Guide at the following website. https:l/cam.start.canon/C002/ Software and Instruction Manuals for Lenses and Software Download from the following website. https://cam.start.canon/ {J • Select [t: Manual/software URL] to display the QR code on the camera screen.
Preliminary Notes and Legal Information • Take and review some test shots initially to make sure the images were recorded correctly. Please note that Canon Inc., its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including memory cards, that result in the failure of an image to be recorded or to be recorded in a way that is machine readable.
Contents Instruction Manuals and Software ......................................... 2 Preliminary Notes and Legal Information ........................... 3 Contents......................................... 4 Safety Instructions ......................... 5 Part Names .................................... 8 Initial Preparations ....................... 10 Attaching the Strap .................. 10 Charging the Battery................ 10 Preparing a Card ..................... 10 Inserting/Removing the Battery ...
Safety Instructions Be sure to read these instructions in order to operate the product safely. Follow these instructions to prevent injury or harm to the operator of the product or others. ~WARNING: Denotes the risk of serious injury or death. • Keep the product out of the reach of young children. A strap wrapped around a person's neck may result in strangulation. The parts or provided items of cameras or accessories are dangerous if swallowed. If swallowed, seek immediate medical assistance.
Safety Instructions Observe the following instructions when using commercially available batteries or provided battery packs. - Use batteries/battery packs only with their specified product. - Do not heat batteries/battery packs or expose them to fire. - Do not charge batteries/battery packs using non-authorized battery chargers. - Do not expose the terminals to dirt or let them come into contact with metallic pins or other metal objects. - Do not use leaking batteries/battery packs.
Safety Instructions ~CAUTION: Denotes the risk of injury. Do not fire the flash near the eyes. It may hurt the eyes. Do not look at the screen or through the viewfinder for prolonged periods of time. This may induce symptoms similar to motion sickness. In such a case, stop using the product immediately and rest for a while before resuming use. Flash emits high temperatures when fired. Keep fingers, any other part of your body, and objects away from the flash unit while taking pictures.
Part Names (31) I I --- --------- -------- (1) Mode dial (17) Shutter button (2) Built-in flash/AF-assist beam emitter (18) <~ (3) Microphone (4) EF lens mount index (19) ISO speed setting button (5) EF-S lens mount index (21) < {l > Remote control terminal (6) < -& > Focal plane mark (22) < ~ > Digital terminal (7) Speaker (8) Terminal cover (23) HDMI mini OUT terminal (9) Lens release button > Main dial P> (10) Lens lock pin (24)
Part Names (4) (6) (2)( 3) ( 5) (7) ,,.,.,-- (1)(8)(9) (16)---1-:::--~-::::--::::::_ (15)-(14)---:::::::! (13)-----+-r~--=~~~~ (12)-- (1) Strap moun__:t__ _ _ _ _ __ 0_ 3L Viewfinder eyepiece (.32__Hot shoe (14) lnfo_button (3) (15)_::: MENU> Men~utton Flash sync contacts (4_ ) _ Dioptric adjustment kno~ _ _ (5) Live View shooting/Movie shooting button Switches from viewfinder display to Live View display. Recording is possible when the power switch is set to <'9'>.
Initial Preparations Attaching the Strap 1 2 Charge the battery. ~ ® . ~ ttm CD Attach the included strap to the strap mount. Lamp colors - Charging: Orange - Fully charged: Green 3 Remove the battery. Charging the Battery 1 Insert the battery (LP-E17) in the charger. Preparing a Card Use the following cards (sold separately), in any capacity. SD memory cards*1 SDHC memory cards* 1*2 SDXC memory cards* 1*2 s~· ~c *1 Cards conforming to SD standards.
Initial Preparations Inserting/Removing the Battery Inserting/Removing the Card 1 Open the cover. 1 2 Insert the battery. 2 Insert the card. Removal 3 Close the cover. Open the cover. Removal 3 Close the cover. ,.,., ,,".; : (I •• ·' s 2 _.
Initial Preparations Attaching a Lens Detaching a Lens 1 Set the power switch to . 1 2 Remove the lens and 2 Remove the lens. Set the power switch to . camera cap. 3 Attach the lens. Press (1) as you turn the lens toward (2) until it stops. Remove the lens toward (3). 3 Attach the lens and camera cap. Align the white or red mount index on the lens with the corresponding mount index on the camera and turn the lens as shown by the arrow until it clicks into place. 12 .
Initial Preparations Setting the Date, Time, Time Zone, and Language 1 Set the power switch to . Use the< ◄ >< ► > keys to select the [~] main tab, then press<@>. 4 Select [ ~ : Date/Time/ Zone]. Function settings 4 r---,,- 2 Open the screen. Sll 11'2 Auto power off Disp. brightness Screen off/on btn Datemme/Zone Languagec,; 1o sec/30 sec * . * Shutter btn. 02/02'20 10;00 English MENU 5 Set the time zone. 3 Access the function settings menu screen. Date/Time/Zone nme zone :t00:00 02 .
I Initial Preparations Zone/rime difference Date/Time/Zone 02/02/2020 10:00:00 (02/02/2020) Zone 02 . 02 . 2020 10 : 00 : 00 London mm/dd/yy Time difference +00:00 Press<@>. cancel OK Select [OK], then press <@>. 7 Set the desired Time zone 02/02/2020 10:00:00 530 Paulo -03:00 Fernando de Noronha -02:00 Azores ·01:00 London ±00:00 Paris +01:00 [ mJoKj < f > keys to select the time zone~<@>~< ◄ > < ► > keys to select [OK] ~ <@> 6 Set the date and time.
Trying the Camera 4 Out Shooting Still Photos Enter < C!1" > mode. ~ ~8~~ & ~ 1 Set the lens switch to . ~ Press<@>. 5 Zoom in or out, as needed. AF1 rMF Cilln) 0 2 Remove the lens cap. ' Turn the zoom ring on the lens with your fingers. 3 Set the power switch to .
I Trying the Camera Out In viewfinder shooting ( 1) In viewfinder shooting: Look through the viewfinder and align the center of the Area AF frame ( 1) with the subject. In Live View shooting: Press the < 0 > button to display a Live View image. When a frame (AF point) is displayed on the screen, aim it over the subject. 6 Focus (press halfway). G> ~ ~ After focusing , the camera beeps and the focus indicator < • > in the viewfinder is lit. In Live View shooting T.he camera beeps after focusing.
Trying the Camera Out 7 Shoot (press fully). I 3 Zoom in or out, as needed. In Live View shooting: Press the < O > button to exit Live View shooting. Recording Movies 1 Turn the zoom ring on the lens with your fingers. 4 Record the movie. Set the power switch to <.,.>. (•REC] is displayed during recording . To stop recording, press the button again. 2 Open the screen. Viewing 1 Press the < [B > button.
I Trying the Camera Out 2 Select an image. , 'Q 7 (:\ I lo. - 0 0 ~ ~~" ~,, 11 '.El ij) Playing movies Saving Camera Images to a Smartphone Images on the camera can be saved to a Bluetooth enabled smartphone connected via Wi-Fi. Make sure [() : Airplane mode] is set to [Off]. On the smartphone, download and install Camera Connect from the App Store/Google Play. Use the latest version of the smartphone OS. Movies are labeled with [DI~]. Activate Bluetooth and Wi-Fi on the smartphone.
Trying the Camera Out 2 6 [OK] [ □ Connect to smartphone] Pairing Connect to smartphone [Q] Once the camera is paired, it stays connected even when off. To stop communication. set [Airplane mode] to [On]. D c:=. OK INFO Info MENU Pairing 3 [Add a device to connect to] Pairing in progress. Use the canon app/software on the smartphone. Nickname: xxxxx Select a device for connection cancel 7 Start Camera Connect. MENU 4 [Do not display] Install Camera Connect on the smartphone.
I Trying the Camera Out 9 On the camera, select [OK]. 11 Confirm that the devices are connected via Wi-Fi. Connect to this smartphone: xxxxx Cancel OK Images on the camera are listed on the smartphone. [Wi-Fi on] is displayed on the camera. 12 Save images on the camera to the smartphone. Paired with: xxxxx use the Canon apptsoftware on the smartphone OK Pairing is now complete, and the camera is connected to the smartphone via Bluetooth.
Shooting Display In Viewfinder Shooting (1) (2) (3) (4) (5) (6) (7) (8) ( 1) Area AF frame Shutter speed Aperture value Exposure level indicator ISO speed Maximum burst Focus indicator AF point (4) In Live View Shooting (2) (4) ( 1) (3) I_ (5) ·· = (6) (1) (2) (3) (4) (5) (6) (7) (8) Shooting mode/Scene icon Number of available shots Maximum burst Battery level indicator Quick Control Exposure level indicator Touch shutter ISO speed (7) (8) Menu Features Use menu screens to configure a variety o
Quick Control Features Press the <@> button on shooting or playback screens to access the Quick Control screen, where you can adjust settings. In Viewfinder Shooting When set to [Shooting screen: Guided] p Selecting an item in the upper section enables you to set the function with the Brighter Darker -- [§]!.> ONE~HOT t ,1 1, ..._ 1r < ◄ >< ► >keys. Selecting an item in the lower section displays an options screen for setting the function by turning the or dial.
Mode Dial Features Use the mode dial to access each shooting mode. ( 1) (2) (3) (1) ~ ./!(r ;() ~ ~~o t- d ~
Mode ~ (5) <(!j> Mode (6) Mode (7) Mode Set the shutter speed before shooting. Set with the dial. The camera automatically adjusts the aperture value to suit your shutter speed. (6) (7) Mode Mode In this mode, you set both the shutter speed and aperture value as desired. To set the shutter speed, turn the dial.
Precautions for Wireless Features • The model number is DS126821 (including wireless module model WM601). Countries and Regions Permitting Wireless Function Use Use of wireless functions is restricted in some countries and regions, and illegal use may be punishable under national or local regulations. To avoid violating wireless regulations, visit the Canon website to check where use is allowed.
Canadian Radio Interference Regulations CAN ICES-3 (B)/NMB-3 (B) FCC Notice (This Product, Model DS126821 systems) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC/ISED(IC) Notice Model: 0S126821 (including wireless module model WM601) This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Trademarks Adobe is a trademark of Adobe Systems Incorporated. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. App Store and macOS are trademarks of Apple Inc., registered in the U.S. and other countries. Google Play and Android are trademarks of Google LLC. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. QR Code is a trademark of Denso Wave Inc.
Canon Customer Support Canon U.S.A., Inc. Canon Customer Care Center Phone (US): 1-800-OK-CANON (1-800-652-2666) www.usa.canon.com/support Manuals available for download: http://www.canon.com/icpd/ Canon Canada Inc. Phone (Canada): 1-800-OK-CANON (1-800-652-2666) (Available Mon. - Fri., 9 AM to 8 PM Eastern Time) Manuals available for download: http://www.canon.ca (Go to "Customer Support") • The warranty of the product(s) is effective only in the country written on your warranty certificate.
Canon Imaging Products Warranty CANON Imaging Products and Accessories Limited Warranty - For U.S.A. & Canada Only The limited warranty set forth below 1s given by Canon U.S.A., Inc. (Canon U.S.A.) in the United States or Canon Canada Inc. (Canon Canada) in Canada with respect to the Canon Imaging Products (see List A on Warranty Card), as well as with respect to the accessories packaged with this limited warranty (collectively the "Products")*, when purchased and used in the United States or Canada.
Canon U.S.A. You may obtain technical support for your Products as follows: • Internet support at www.usa.canon.com/support (E-mail support also available) • Telephone assistance from a Canon U.S.A. Customer Care representative free of charge during regular business hours at 1-800-OK-CANON (1-800-652-2666). Canon Canada You may obtain technical support for your Products as follows: • Internet support for English at www.canon.ca/english/cs (E-mail support also available) • Internet support for French at www.
8-CT2-8117 Canon CT2-8117-A 0220Ni40.0 © CANON INC.
Cauou CANON LIMITED WARRANTY/ GARANTIE LIMITEE CANON CANON U.S.A., INC. Cauou Dealer Record of Canon Purchase/ Fiche d'achat pour concessionnaire Canon Complete this card at time of sale. A remplir au moment de l'achat CA NON CANADA INC.
Canon REMARKS Thank you for purchasing this Canon product. This warranty card ensures access to warranty services free of charge in the country/region of purchase, during the Warranty Period and subject to the Warranty Terms and Conditions set forth by Canon. You can find the Warranty Terms and Conditions applicable to your country/region of purchase at the end of the Instruction Manual supplied with the product or on a separate leaflet. Merci d'avoir achete ce produit Canon.
Register Your Canon Imaging Product Now Visit www.canon.ca/register ENJOY THE BENEFITS OF REGISTERING Register Your Canon Imaging Product Now Visit www.registercanon.com or call 1-800-OK-Canon (1-800-652-2666) • Receive automatic notification of the most up to date driver, firmware and software upgrades. • Receive the latest product and promotion information from Canon Canada Inc. • As a valued customer, you will receive important information relating specifically to your product.
CANON iMAGE GATEWAY Store, share, play and print at this Canon online photo site. WIRELESS HELP Learn How to Set Up Your Wi-Fi• Connection! USA Find easy step by step instructions for your camera at. usa.canon.com/WirelessHelp Learn How to Set Up Your Wi-Fi• Connection! Find easy step by step instructions for your camera at Canada canon.ca/wireless Apprenez aConfigurer Votre Connexion Wi-Fi•! Trouver des instructions point par point qui sont faciles pour votre appareil photo a· canon.
