Owner's Manual

Exposure control
Metering functions under various shooting conditions
Item
Still photo shooting
Movie recording
Optical viewfinder Live View
Metering mode
216-zone (18 × 12)
metering using
approx. 220,000 pixel
RGB+IR metering
sensor TTL full-aperture
metering
384-zone (24 × 16) metering using image sensor
output signals
Evaluative metering Supported
Supported
*
When faces are detected
with [
+Tracking]
Partial metering
Supported: Approx. 6.5%
of the screen
Supported: Approx. 5.8%
of the screen
–
Spot metering
Supported: Approx. 2.0%
of the screen
Supported: Approx. 2.9%
of the screen
–
Center-weighted average metering Supported
Supported
*
When no faces are
detected
Metering brightness range
* At 23°C/73°F, ISO 100
EV 1 – 20 EV –2 – 20 EV 0 – 20
Exposure control under various shooting conditions (Creative Zone)
Item Still photo shooting Movie recording
Shutter speed 1/4000
– 30 sec., Bulb 1/4000
– 1/8 sec.
ISO speed (Recommended
exposure index)
ISO 100*
1
– 25600*
2
(in 1/3-stop increments)
• 4K UHD: ISO 100*
1
– 6400
(in 1/3-stop increments)
• Full HD / HD: ISO 100 – 12800*
3
(in 1/3-stop increments)
ISO Auto (Recommended exposure
index)
• Without flash firing: ISO 100*
1
–
25600*
4
• Flash firing: ISO 100*
1
– 1600*
4
*
5
• Bulb exposure: ISO 400
• 4K UHD: ISO 100*
1
– 6400
• Full HD / HD: ISO 100*
1
–
12800*
3
*
4
*
6
Max. for ISO Auto
ISO 400 – 25600 (in 1-stop
increments)
ISO 6400 – 12800*
3
(in 1-stop
increments)
* 1: ISO 200 with [
: Highlight tone priority] set to [Enable] or [Enhanced].
* 2: H (equivalent to ISO 51200) with [2: ISO expansion] in [ : Custom Functions(C.Fn)] set to
[1:Enable].
* 3: H (equivalent to ISO 25600) with [2: ISO expansion] in [ : Custom Functions(C.Fn)] set to
[1:Enable].
* 4: Varies depending on [Max for Auto] setting.
*
5: Maximum limit may be lower depending on the ISO speed set by variable control of maximum ISO Auto
limit for E-TTL.
* 6: ISO 6400 when Digital zoom is set.
767