User Manual

Receiver Setup and Positioning
Referring to the Instruction Manual of the Speedlite (receiver), configure the following
settings.
Set up the Speedlite as a receiver.
Set the camera and Speedlite to the same channel.
To control the flash ratio, set the receiver's flash group.
Position the camera and receiver within the following range.
Arrange the receiver with its wireless sensor facing the camera.
(1) Indoors
(2) Outdoors
(3) Approx. 10 m
(4) Approx. 7 m
(5) Approx. 80°
(6) Approx. 5 m
(7) Approx. 7 m
Canceling Receiver Auto Power Off
Press the camera's < > button. For manual flash, cancel by pressing the receiver's test
flash button.
231