User Manual

Fully Automatic Shooting With Multiple External Flash
Units and the Built-in Flash
The built-in flash can be added to Fully Automatic Shooting With Multiple External Flash
Units.
The basic settings are as follows, and by adjusting the [Firing group] setting, you can set
up a variety of wireless multi-flash photography that also uses the built-in flash.
Set these basic settings.
Flash mode: E-TTL II
E-TTL II meter.: Evaluative
Wireless func.: [ + ]
Channel: (same as receiver)
1.
Select [Firing group].
Select the firing group, then set the firing ratio, flash exposure
compensation, and other required settings before shooting.
249